• Journal of Oral Medicine and Pain
• /
• v.14 no.1
• /
• pp.35-42
• /
• 1989

악구강계의 질환을 진단하고 치료후의 예후를 판정하기 위하여 maximal clenching시에 측정된 tooth contacts의 수와 분포가 이용되어 왔다. 그러나 maximal clenching시 반복된 tooth contacts의 측정은 저작근 피로등 문제점을 가지고 있다. 본연구는 건강한 성인 15명을 대상으로 maximal clenching 및 habitual clenching시 T-Scan system을 이용하여 치아접촉 수와 접촉시간을 측정, 비교 검토하여 habitual clenching을 이용한 방법이 Tooth contacts의 연구에 이용될 수 있는지를 확인 하는데 목적이 있으며, 연구결과는 다음과 같다. 1. Habitual clenching시 upright, semisupine position에서의 전측두근의 근활성은 maximal clenching시의 64.5%, 61.9% 및 73.3%로 나타났다. 2. Maximal clenching시 치아접촉 수와 접촉시간은 16.82개 및 0.429초로 나타났으며 habitual clenching시에는 11.65개 및 0.177초로 나타났다. 3. 치아접촉수와 접촉시간은 체위에 따라 크게 변화되지 않았다. 4. 치아접촉수와 접촉시간의 측정시에 habitual clenching을 이용하는 방법이 maximal clenching을 이용하는 방법보다 재현성이 더 높은 것으로 나타났다. 5. Tooth contacts의 연구시 habitual clenching을 기준으로 사용할 수 있다.

• CDE review
• /
• v.3 no.2
• /
• pp.76-79
• /
• 1997

최근 몇년간 CAD/CAM 분야에서 활동하시는 많은 분들이 'RP'라는 신기술의 등장과 발전과정을 다분히 생경스러운 심정으로 지켜봐 왔을 것으로 생각된다. 주지하다시피 'RP 즉 Rapid Prototyping'은 '컴퓨터에 저장된 3차원 형상모델의 기하학적 자료로부터 그 물리적인 모형형상을 신속하게 조형해 내는 것'으로 주어진 설계 제품의 수학적 모델을 그 이전에 존재하였던 그 어떤 가공방식과도 비교할 수 없는 빠른 시간안에(통상 24시간 이내) 물리적인 모형으로 재현해 낸다는 것이 그 대표적인 장점이라고 하겠다. 우리말로는 '신속조형기술'이라고 명명할 수 있는 이 기술은 설계된 제품 형상의 기하학적인 복잡성이나 반복성에 전혀 구애받지 않고 그 어떤 제품형상도 조형이 가능하다. 물론 초기에 이 기계장치의 발명목적은 'RP'라는 용어가 시사하듯이 컴퓨터나 수작업에 의해 설계된 제품형상을 신속하게 관능(시각 및 촉각) 감각을 통해서 관찰하고 그에 따른 형상설계의 내용을 검증하기 위함이었다. 그러나 이 기술이 최근 그 발전의 행보를 빨리함에 따라 기존에는 상상할 수도 없었던 복잡한 제품 형상의 신속한 모형제작은 물론 가까운 장래에는 이의 주물성형을 위한 주형의 제작이나 플라스틱 사출성형용 금형제작(신속 주형/금형 제작-RT: Rapid Tooling 이라고 호칭)까지도 신속하게 수행해낼 것으로 기대된다.

• The korean journal of orthodontics
• /
• v.40 no.2
• /
• pp.77-86
• /
• 2010

Objective: The purposes of this study were to evaluate the reproducibility and reliability of head posture obtained by registering outer canthus as a soft tissue landmark with the Outer Canthus Indicator (OCI). Methods: Twenty-one adults with normal facial morphology were enrolled in this study (mean age $27.5\;{\pm}\;1.72$ years). To register initial head posture, height of the outer canthus from the ear rod plane was measured using OCI. Head posture was reproduced by moving the head upwards and downwards until the outer canthus was in a straight line with the indicator set at a registered height. After the head posture is reproduced by two operators after two days, lateral photographs were taken. Computerized photometric analyses of the photographs were performed. Results: The head rotations around the transverse axis were $0.69\;{\pm}\;0.43^{\circ}$, $0.98\;{\pm}\;0.65^{\circ}$ from each of the two operators. Standard errors were $0.09^{\circ}$ and $0.14^{\circ}$ each, which were similar to results from past research findings. There were no significant differences between the data from the two operators (p > 0.05). There were no correlations between the head rotation around the horizontal and vertical axes (p > 0.05). Conclusions: The present study suggests that OCI-registered head posture may minimize errors from vertical head rotation in cephalometry and photometry.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.2
• /
• pp.93-106
• /
• 2011

This review has dealt with definition, size, history, and status of mesocosm, and also discussed several problems and trouble shootings related to the building of mesocosm, and finally will suggest the future directions of this scientific tool. Due to the restriction of the space, the discussion mainly focused on "the mesocosm building for the soft-bottom ecosystem". The mesocosm is defined as "medium-sized, self-sustaining, and man-controllable ecosystem". This type of studies has already initiated since 1960, but nowadays it expands to the diverse fields of science and technologies, such as toxicology, limnology, environmental sciences and engineering, and even geochemistry. As a scientific tool, the mesocosm requires following aspects; replicability, repeatability, and ecological realism or accuracy. Several technical problems have to be solved for the perfect building of mesocosm. They are known as scaling, composition of seawater/sediment, light intensity, turbulence, hydraulic residence time, and top predator. These trouble shootings are provided at the discussion in detail. In the context, I expect two promising directions in the future; 1. Objectivity based on the diverse statistical methodologies, 2. "Living ecosystem modelling" coordinated with the mathematical modelling. With these, the mesocosm will be more powerful tool for the scientists and engineers to investigate the chemical and the ecological responses to the toxic materials and global climate changes.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.1
• /
• pp.13-20
• /
• 2021

In this paper, a new algorithm is proposed to estimate the damage size by combining the reflected area with the reflected position and extracting contours in proportion to the maximum value of pixels from the visible image. The cumulative summation feature vector algorithm is used to obtain the area of the reflected signal. To get the position of the reflected signal, the signal correlation algorithm is used to decompose the reflected signal from the damage. The proposed algorithm is tested and validated for composite panels. Repetitive experiments are performed and it is confirm that the proposed algorithm is reproducible. Further, it is verified that the damage size can be estimated appropriately by the proposed algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1653-1660
• /
• 2016

The synthetic aperture rardar (SAR) is an active sensor using microwaves. It transmits a microwave signal, called a chirp pulse, and receives the reflected signal in a moving platform such as satellite and unmanned aerial vehicle. Since this sensor uses microwaves that can penetrate the atmosphere, SAR generates the images regardless of light and weather conditions. However SAR operates on the moving platform, the Doppler shift and the side-looking observation method should be considered. In addtion, a residual image or ghost image can be occurred according to selection of the pulse repetition frequency (PRF). In this paper, a range design of the PRF for the L-band spaceborne SAR system is studied for prevention of SAR image distortion. And the system is studied for prevention of SAR image distortion. And the system parameter and the PRF are calibrated iteratively according to the proposed system design procedure and design constraints. The MATLAB based on SAR system simulator has been developed to verify the validity of calculated PRF. The developed simulator assumes that SAR sensor is operated by the PRF calculated from the design. The results of the simulator show that the targets in image has a valid peak to side-lobe ratio (PSLR) so that the PRF can be used for the spaceborne SAR sensor.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.4
• /
• pp.33-47
• /
• 2024

Offshore wind structures are subject to long-term repeated horizontal loads from wind, waves, and currents, making it essential to consider these loads in the design of offshore foundations. In this respect, monopiles are large-diameter hollow steel pipes that are relatively simple to construct compared with piles used on onshore sites. They can provide stable support for wind structures and have well-established design codes, leading to their widespread use globally. The behavior of monopiles under lateral static loads is typically assessed using the p-y method proposed by the American Petroleum Institute (API). However, the applicability of p-y curves to large-diameter monopiles exposed to repeated cyclic horizontal loads, such as those experienced in offshore wind applications, must yet be evaluated. Thus, this study evaluated the behavior of monopiles under two-way cyclic horizontal loads in loose silty sand, a representative soil type of the southwestern coast of Korea, using centrifuge model tests. The results demostrated that the behavior of monopiles varied depending on the loading level, number of cycles, and direction of the cyclic loads. Furthermore, the p-y curve method proposed by the API overestimated the behavior of a large-diameter monopile installed in silty sand under two-way cyclic loads.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.8
• /
• pp.1194-1199
• /
• 2015

Vitamin $K_1$ (phylloquinone) content of commonly consumed foods in Korea were determined by solvent extraction followed by reversed-phase liquid chromatography using post-column derivatization and fluorescence detection. Samples were obtained in the years of 2013 and 2015. In this study, 46 vegetables, 14 fruits, and 6 legumes were analyzed. Relatively higher amounts of vitamin $K_1$ were found in sweet potato leaves, green kiwi, and mung beans among vegetables, fruits, and legumes, respectively. The content of vitamin $K_1$ in vegetables including spinach, broccoli, and potato ranged from non-detectable (ND) to $1,467.3{\mu}g/100g$. The content of vitamin $K_1$ in fruits ranged from ND to $42.7{\mu}g/100g$. The content of vitamin $K_1$ in legumes, including soybeans, mung beans and peas ranged from 1.7 to $63.4{\mu}g/100g$. In addition, the analytical method validation parameters including recovery, reproducibility, repeatability, peak purity, and linearity were calculated to ensure the method's validity. The results showed high linearity with a correlation coefficient of 0.9999. Overall recovery was close to 100% (n=5). This study revealed reliable vitamin K content in commonly consumed foods in Korea for a nutritional information and food composition database.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.11
• /
• pp.1705-1709
• /
• 2010

Peppers (Capsicum annuum L.) are a rich source of phytochemicals including polyphenolics, flavonoids, capsaicinoids and ascorbic acid. Capsaicinoids are a group of 12 or more related alkaloids responsible for the pungent sensation in the fruits of the genus Capsicum. Ascorbic acid is another functional and nutritional constituent of peppers. In this study, the contents of two major capsaicinoids (capsaicin and dihydrocapsaicin) and ascorbic acid in 131 pepper breeding lines were quantified by HPLC. In 131 pepper breeding lines, capsaicin and dihydrocapsaicin contents were in the range of 0.0 to 219.6 and 0.0 to 110.8 mg/100 g, respectively. The breeding lines with higher capsaicin content contained higher dihydrocapsaicin content as well. Ascorbic acid contents were 264.9 to 1695.5 mg/100 g for the 131 pepper breeding lines. The analytical method validation parameters including accuracy, repeatability, and reproducibility were calculated to ensure the method's validity. This study provides basic information to plant breeders and biotechnologists who are planning to breed genotypes with high content of phytochemicals.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.17 no.1
• /
• pp.11-17
• /
• 2013

Purpose: The use of SUV which should be normalized by lean body mass (LBM) is recommended for PET response criteria in solid tumors. LBM which was determined by whole body CT was used for SUV normalization (SUL) in this study. The purpose of the present study was to assess interobserver and intraobserver reproducibility of SUL measurements in reference organs. Materials and Methods: F-18 FDG PET/CT was conducted on 52 subjects and LBMs were directly determine by whole body CT for normalization of SUV. The 3 cm diameter spherical VOI, $1\times2$ cm cylindrical VOI, 2 cm diameter spherical VOI were placed in the liver, descending aorta and spleen, respectively. Experienced two observers measured SULmax and SULmean in each organ. Repeated measurements were conducted two weeks apart by observer 1 blind to previous results. Similarly, measurements were conducted on the same patients by observer 2. For assessing reproducibility(or repeatability), the paired t-test, Pearson's correlation coefficients (CC), and technical error of measurement (TEM) were calculated. Results: For interobserver reproducibility in liver SULmax and SULmean, no significant differences were found between observers(paired t-test, P=0.536, 0.293, respectively). CC and TEM for liver SULmean were 0.909 (P=0.000) and 0.067 SUL unit, respectively. Corresponding figures for liver SULmax were 0.882 (P=0.000) and 0.117 SUL unit, respectively. For intraobserver reproducibility in liver SULmax and SULmean, no significant differences were observed within observer1 (paired t-test, P=0.374, 0.268, respectively). CC and TEM for liver SULmean were 0.924 (P=0.000) and 0.061 SUL, respectively. Corresponding figures for liver SULmax were 0.908 (P=0.000) and 0.104 SUL, respectively. Similarly, no significant differences were found in SULmax and SULmean of the spleen and aorta between observers. Conclusion: The current study demonstrated that both SULmean and SULmax measurements in normal reference organs are highly reproducible. Reproducibility of SULmean in reference organs were slightly better than SULmax. Interobsever technical error of measurement was less than 0.10 SUL unit for liver SULmean, and 0.12 SUL unit for liver SULmax. Intraobsever technical error of measurement was less than 0.07 SUL unit for liver SULmean, and 0.11 SUL unit for liver SULmax.