• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.264-267
• /
• 2005

플럭 형성 비소 오염토양에 대한 토양세척기법의 적용성 실험결과, 세척용액 100 mM과 500 mM의 농도에서 대상 토양에 대한 비소 용출량은 수산화나트륨이 염산보다 높은 효율을 보였으며, 농도 1000 mM의 경우에는 염산이 비교적 우세한 세척효율을 보였다. 토양오염공정시험법에 의한 세척후 토양내 잔류비소 농도의 경우, 염산이 수산화나트륨과 비슷하거나 다소 우세함을 알 수 있었다. 세척 대상 토양의 Cut-off size limit을 선정하여 토양세척시 생성되는 플럭을 제거하지 않고 반복 세척한 결과, 수산화나트륨의 농도 200 mM은 1000 mM에 비하여 잔류된 비소량이 비슷하거나 비교적 높았으며, 2가지 농도에 대하여 총 5회 반복 세척한 토양의 비소 농도는 토양환경보전법의 가지역 우려기준 농도인 6 mg/kg에 근접한 결과를 보였으나, 염산의 경우 총 5회 세척시 비소의 농도가 약 9 mg/kg으로 비소 잔류량이 보다 큼을 알 수 있었다. 플럭을 제거한 후 반복 세척시 수산화나트륨의 농도 1000 mM이 200 mM에 비하여 토양 세척효율이 증가하였으며, 1000 mM로 5회 세척시 잔류비소 농도가 가지역 우려기준 농도에 근접한 약 6.7 mg/kg이었고 염산을 이용하여 세척한 경우에는 3회 세척시 약 6.7 mg/kg 4, 5회 반복 세척시 각각 약 3.9, 3.3 mg/kg으로 가지역 우려기준에 적합한 농도조건이 됨을 알 수 있었다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.1
• /
• pp.31-40
• /
• 2011

Purpose: This study was performed to investigate the actual state about ultrasonic cleaning of soft contact lenses in local optical shops and evaluate the removal effect of protein deposit on soft contact lenses with different lens containers by ultrasonic cleaner for eyeglasses. Methods: The actual state about ultrasonic cleaning of soft contact lenses was surveyed in total 75 local optical shops in Seoul, Korea. The cleaning efficacy of different lens containers was compared by measuring the protein remained on ocufilcon D contact lenses after washing by an ultrasonic cleaner for eyeglasses. The changes on surfaces and wetting angles of ocufilcon D contact lenses by repeat ultrasonication were further investigated. Results: The main purpose to use ultrasonic cleaners in local optical shops was rapid cleaning. The ultrasonic cleaning efficacy of ocufilcon D contact lenses with glass containers was little higher than it with plastic containers, but was not significantly different. The changes on surfaces and wetting angles of ocufilcon D contact lenses in a plastic lens container by repeat ultrasonication such as 30 and/or 60 times were shown. Conclusions: There was not significant difference in cleaning efficacy between glass and plastic lens containers. However, repeat cleaning with ultrasonic cleaner for eyeglasses would be carefully considered since some significant changes in the parameters of lens surface and wetting angles were detected by repeat ultrasonification even when lens containers were used for ocufilcon D contact lens during ultrasonictions.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.3
• /
• pp.527-536
• /
• 2017

This study investigated the detergency and functionality of laminating finished fabrics for outdoor wear based on repeated washing. Laminating finished fabrics were selected as the main fabrics for outdoor wear and used as test fabrics. The effects of outdoor exclusive detergent and normal neutral detergent were examined according to washing time, temperature, rpm and detergent concentration based on the use of a Terg-O-Tometer. Re-soiling of the test fabrics was measured by Florio-Mersereau. Permeability, water repellency, water resistance and absorbency were estimated to measure improvements and effects in regards to outdoor exclusive detergent in optimal washing conditions. The detergent effect of outdoor exclusive detergent was superior compared to normal neutral detergent. Re-soiling was lower with exclusive outdoor detergent than with normal neutral detergent. The measurement of functionality for laminating finished fabrics before and after washing indicated that functionality was decreased with repeated washing.

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.4
• /
• pp.347-353
• /
• 2010

Purpose: An in vitro study was conducted to compare the lipid cleaning efficacy of care solutions on balafilcon A silicone hydrogel (SiHy) lens. Methods: Lipid spoilation was performed by incubating balafilcon A SiHy lenses in phosphate buffered saline (PBS) containing oleic acid, oleic acid methyl ester and cholesterol. Spoiled contact lenses rinsed with PBS were cleaned with surfactant cleaner, alcohol containing cleaner and multipurpose solution (MPS) respectively and repetitive spoilation and cleaning was conducted up to 14 times. To observe the cleaning effect of ultrasonic wave on the lipid deposit, each spoiled lens was ultrasonicated and then compared with non-sonicated lens. Lipids deposit on the contact lenses was extracted by methanol:chloroform (1:1, v/v) solution. High performance liquid chromatography was used to analyze and quantify lipid deposit extracts. Results: The effectiveness of alcohol containing surfactant cleaner on the lipid deposits was better than that of surfactant cleaner and MPS, and the cleaning efficacy was significantly higher in the ultrasonic wave treated group. Lipid deposits were not removed completely by contact lens care solutions so that lipid deposits increased continuously and cumulatively. Conclusions: The cleaning efficacy of contact lens care solutions was not satisfactory to remove lipid deposits on the SiHy lens that new cleaning products specially designed for SiHy lenses are needed to develop.

• Journal of the Korean Arthroscopy Society
• /
• v.13 no.1
• /
• pp.63-67
• /
• 2009

We report the case of a 21-year-old man with acute septic arthritis of the knee after meniscal allograft transplantation, which was successfully treated with repeated arthroscopic debridement and irrigations. Our procedures included arthroscopic debridement and irrigation with 10L normal saline, repeated arthroscopic irrigations (5 times), and intravenous antibiotics. Our decision to repeat the debridement was based on clinical and laboratory results. The significance of this case is that early aggressive arthroscopic debridement and repeated irrigations as part of a treatment protocol of acute septic arthritis after meniscal allograft transplantation can be an effective treatment option in selected cases.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.11
• /
• pp.626-633
• /
• 2017

The present study investigated the effect of a water-washing process, which is part of the acid hydrometallurgical process for recovery of high purity of zinc, on the removal of alkali metals and chlorides (Na, K, Ca, Cl) from Electric arc furnace dust (EAFD). Two EAFD samples with different properties were characterized by particle size, XRD and element analysis, and their washing efficiencies (%) on alkali metals and chlorides were compared according to pH, washing time, liquid to solid (L/S) ratio and number of washings. The results show that the alkali metals and chlorides could be effectively removed by the washing (at L/S ration of 3 for more than 30 min., pH 10~11) while minimizing loss of zinc (<0.1%), in which the washing efficiency was Na-78%, K-76%, Cl >99%, respectively. Na and K could be removed up to 97% and 89% respectively by 3 times of repeated washings. With increased sample volume (10 times) of the mixed (1:1, w/w) sample with two types of EAFD, it was confirmed that the pH(10~11) can be used as the main process control parameter for the washing of the alkali metals regardless of EAFD properties.

• Korean Journal of Food Science and Technology
• /
• v.53 no.6
• /
• pp.792-798
• /
• 2021

This study was conducted to determine the washing conditions in which surfactants were not detected after washing fruits and vegetables with detergent. Residual surfactants were analyzed using LC-MS/MS. The analyzed surfactants were LAS, SLES, AOS, SLS, CAPB, and LDAO. The survey found that 14% of the respondents used detergent correctly according to the directions indicated. After soaking the samples with 0.2% detergent, the average residual surfactant content was 2.61%. Soaking under 1% and 5% of the detergent, 4.68-5.50% of surfactant remained in the sample. In cherry tomatoes, the surfactants were below the LOD after rinsing twice. However, lettuce was rinsed three times. These results suggest that when using detergent for washing fruits and vegetables, following the labelled usage and rinsing at least three times in 30 seconds could minimize residual surfactants.

• 월간산업보건
• /
• s.255
• /
• pp.45-46
• /
• 2009

• 프린팅코리아
• /
• v.8 no.9
• /
• pp.54-59
• /
• 2009

앞으로 환경문제에 대한 대책은 더욱 급속한 스피드로 진행되어 갈 것이다. 그 가운데 품질과의 양립이 중요해지지만, 사용하는 인쇄기의 성능을 최대한 끌어올려 높은 인쇄품질을 실현하려면 사용하고 있는 자재의 밸런스가 좋은 상태를 유지해야 한다. 오존층의 파괴 등 지구 온난화를 비롯한 지구 규모에서의 환경보호에의 대책은 기업이 솔선수범하여 도전할 테마다. 동시에 인체에도 영향이 적은 제품개발이 무엇보다 중요하다. 일반적으로 인쇄는 잉크 또는 롤러와 밀접한 관계를 가지고 있다. 잉크의 특성으로 인해 인쇄물의 건조가 되지 않거나 잉크의 지지도가 나쁘게 되며 세척에 많은 시간을 요구하게 된다면 인쇄 품질을 기대하기는 어려울 것이다. 또한 롤러를 반복적으로 세척하고 새로운 것으로 교체하는 경우에도 작업 능률의 저하를 가져 올뿐만 아니라 작업자의 피로를 유발하여 안전사고 위험에도 쉽게 노출될 수 있다. 이에 이러한 문제점들에 대해 알아보았다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.2
• /
• pp.107-115
• /
• 2013

Purpose: This study was conducted to investigate the change of soft contact lens parameters after eyeliner deposition and compare the cleaning efficiency and the recovery rate of lens parameters by different cleaning methods. Methods: The eyeliner was deposited on three types of soft contact lenses made of different materials for 1 hour, 4 hours and 6 hours and those lenses were washed by the eyeglasses ultrasonic cleaning and by hands. The changes in visible light transmittance, diameter and surface of those lenses were compared before and after cleaning of the lens. Results: The visible light transmittance of soft contact lenses decreased along with the deposition time of eyeliner. The patterns of the eyeliner deposition on soft contact lens appeared differently depending on the physical properties of the lens material. Thus, the largest eyeliner deposition was found on narafilcon A lens. The diameters of hilafilcon B and etafilcon A lenses were decreased, however, the diameter of narafilcon A lens was increased. The cleaning efficiency of the eyeliner deposition was greater with the multipurpose solution by hands than with the eyeglasses ultrasonic cleaner. However, the recovery of lens parameters such as the lens diameter, visible light transmittance and lens surface due to the eyeliner deposition to its original state was limited. Conclusions: From these results, it is suggested to minimize eye makeup when wearing soft contact lens. Furthermore, the reduced wearing time and shorter cycle of lens replacement may be needed by considering a change of lens parameter when the repeat eye makeup is applied.