• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.1-5
• /
• 2022

We presented a micro hemi-sphere structure flexible film to improve the external quantum efficiency (EQE) in OLEDs. The micro hemi-sphere flexible film was fabricated with breath figure (BF) method and replica process. At 45 mg/mL of concentration, the size of the hemi-spheres was approximately 6.2 ㎛ were obtained which are the most circular shape. So, it was possible to yield the best performance with an improvement of 33 % in the EQE and the widest viewing angle ranging from 0° to 70°. As a result, the hemi-sphere film's size and distribution seem to play important roles in enhancing the EQE in OLEDs. Furthermore, the flexible hemi-sphere film based on polymeric materials could offer an effective, large-scale, mass-produced product and a simple process and approach to achieve high efficiency in flexible OLEDs.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.828-834
• /
• 2023

In this paper, we studied an antenna that forms a wide beam width by applying a horn-shaped reflector to a patch array antenna. To implement a wide beam width, three patches were arranged in each of the four directions on a square microstrip substrate, and a horn-shaped reflector was applied to the rear of the array antenna. Through this structure, the vertical beam pattern formed from the patch was converted to a diagonal direction, and as a result, the beam widths formed in each of the four sectors were added to create a wide beam width close to a hemisphere. The proposed antenna was studied for application to UAV(unmanned aerial vehicle), and the simulation test results confirmed that the 4.5 dBi beam width was 146.8°.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.1
• /
• pp.1-9
• /
• 2012

For the optimal design of a shrimp pot to control the catch size and to reduce catch the small size shrimp, tank experiments were carried out to study the pot stability under water. Tank experiments were carried out to measure the drag with 4 kinds of model pots that have 50% selection on the individual of 25mm carapace length. The drag of each pot was measured every 10 times with changing the current speeds from 0.1m/s to 0.7m/s in 0.1m/s intervals and the pot attack angle from $0^{\circ}$ to $90^{\circ}$ in $15^{\circ}$ interval in a flume tank. The relation between the current speed and drag was presented. The stability of pot was estimated using the drag data and the friction data of Kim et al. (2008b). The results showed that, the drag was shown lower as small as the projected area of pot depending on the current speeds and angles. The model pots were showed to slide on the seabed in case of rock at the current speeds 0.35-0.38m/s and the possibility of turn over at the current speeds 0.77-0.89m/s. In conclusion, the stability of a shrimp pot showed more stable as the pot of the lower the height and the smaller projected area on current.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.2 s.95
• /
• pp.23-30
• /
• 1999

This paper investigates the radial performance of self-acting spiral-grooved air bearing, used to support small high-speed rotating bodies. Repeatable runout, nonrepeatable runout, stiffness and supporting load are selected as the performance. The clearance between rotor and stator, the stator groove depth, and the rotating speed are chosen as three main parameters affecting the performances. Force application and displacement measurement are done in a noncontact manner, in order not to disturb operation: electromagnetic force is applied to the rotor and gap sensors are used to measure the displacement of the rotor. Experimental results show that repeatable runout decreases as speed, groove depth and clearance decrease. Nonrepeatable runout decreases as clearance decreases, and it has a minimum value at $5.5{\mu}m$ of grove depth and a maximum value at speed of 18.000rpm. Stiffness increases as speed increases and clearance decreases, and has a maximum value around $5.5{\mu}m$ of groove depth. The relationship between force and displacement is linear for small displacement, but becomes nonlinear for large displacement. Supporting load is linearly proportional to the stiffness, and it is a maximum value around $4.75{\mu}m$ of clearance.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.3
• /
• pp.243-251
• /
• 2016

LiDAR data processing steps include noise removal, filtering, classification, segmentation, shape recognition, modeling, and quality assessment. This paper focuses on modeling and accuracy evaluation of 3D objects with curved surfaces. The appropriate modeling functions were determined by analyzing surface patch shape. Existing methods for modeling curved surface features require linearization, initial approximation, and iteration of the non-linear functions. However, proposed method could directly estimate the unknown parameters of the modeling functions. The results demonstrate feasibility of the proposed method. The proposed method was applied to the simulated and real building data of hemi-spherical and semi-cylindrical surfaces. The parameters and accuracy of the modeling functions were estimated. It is expected that the proposed method would contribute to automatic modeling of various objects.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.5
• /
• pp.92-98
• /
• 2006

This paper deals with the potential interferences between ground rods. To propose a method for reducing the potential interference caused by grounding electrodes, the theoretical analysis and the reduced scale model tests, which we related to the measurement and computation of ground potential rise and potential interference caused by actual-sized grounding electrodes where current is injected, were carried out. The ground potential rise and potential interference coefficients were measured by using the hemispherical water tank grounding simulator and calculated by CDEGS software as a function of the distance between grounding electrodes. The ground potential rises and potential interference coefficients strongly depend on the distance between grounding electrodes, and the measured results were compared with the computer calculated data and were known in good agreement.

• Korean Chemical Engineering Research
• /
• v.48 no.4
• /
• pp.423-427
• /
• 2010

Carbon nano sphere(CNS) and nano bowl of carbon(NBC) containing 1.0 wt% copper were prepared by impregnation method and their catalytic activity was compared in the phenol hydroxylation with hydrogen peroxide in the presence of water and acetonitrile as a solvent, respectively. Cu content of catalysts was determined by EDS, and BET, pore volume, pore size and pore size distribution were compared. For both catalysts, phenol conversion, $H_2O_2$ efficiency and yield of catechol and hydroquinone were higher in the presence of water as a solvent than those in the presence of actonitrile. And catalytic activity such as phenol conversion and $H_2O_2$ efficiency of 1.0 Cu/CNS is about two times higher than that of 1.0 Cu/NBC in water solvent.

• Progress in Medical Physics
• /
• v.9 no.2
• /
• pp.95-104
• /
• 1998

The dynamic properties of the 3rd-order neuron of the retina was investigated by using conventional intracellular recording techniques. Experiments were performed in the superfused retina-eyecup preparation of the channel catfish, Ictalurus punctatus. The cornea, iris, lens, and vitreous were removed by absorption with Kimwipe tissue under the dissection microscope thereby exposing the retina in a hemi -eyecup. The electrical signal was amplified by electrometer, viewed on oscilloscope. Regular signals from the cells were recorded on a penwriter and stored by data recorder and computer. Full-field, spot or annular light stimuli were generated on a computer monitor and focused onto the retina. Baclofen hyperpolarized the dark membrane potential, suppressed sustained component and enhanced transient component of the ON-sustained cell with a large transient component, but did not affect the surround antagonism of the cell. Baclofen selectively suppressed responses evoked by moving bar light stimuli on the ON-OFF transient cell. The results suggest that transient cells have directional selectivity in the inner retina. These dynamic properties of amacrine and ganglion cells were modulated by baclofen. Therefore, it is presumed that there is baclofen-induced directional selectivity in ON-OFF transient cells in the catfish retina.

• Progress in Medical Physics
• /
• v.18 no.1
• /
• pp.48-54
• /
• 2007

This study is to develope a phantom for MOSFET (Metal Oxide Semiconductors Field Effect Transistors) dosimetry and compare the dosimetric properties of standard MOSFET and microMOSFET with the phantom. In this study, the developed phantom have two shape: one is the shape of semi-sphere with 10cm diameters and the other one is the flat slab of $30{\times}30cm$with 1 cm thickness. The slab phantom was used for calibration and characterization measurements of reproducibility, linearity and dose rate dependency. The semi-sphere phantom was used for angular and directional dependence on the types of MOSFETs. The measurements were conducted under $10{\times}10cm^2$ fields at 100cm SSD with 6MV photon of Clinac (21EX, Varian, USA). For calibration and reproducibility, five standard MOSFETS and microMOSFETs were repeatedly Irradiated by 200cGy five times. The average calibration factor was a range of $1.09{\pm}0.01{\sim}1.12{\pm}0.02mV/cGy$ for standard MOSFETS and $2.81{\pm}0.03{\sim}2.85{\pm}0.04 mV/cGy$ for microMOSFETs. The response of reproducibility in the two types of MOSFETS was found to be maximum 2% variation. Dose linearity was evaluated In the range of 5 to 600 cGy and showed good linear response with $R^2$ value of 0.997 and 0.999. The dose rate dependence of standard MOSFET and microMOSFET was within 1% for 200 cGy from 100 to 500MU/min. For linearity, reproducibility and calibration factor, two types of MOSFETS showed similar results. On the other hand, the standard MOSFET and microMOSFET were found to be remarkable difference in angular and directional dependence. The measured angular dependence of standard MOSFET and microMOSFET was also found to be the variation of 13%, 10% and standard deviation of ${\pm}4.4%,\;{\pm}2.1%$. The directional dependence was found to be the variation of 5%, 2% and standard deviation of ${\pm}2.1%,\;{\pm}1.5%$. Therefore, dose verification of radiation therapy used multidirectional X-ray beam treatments allows for better the use of microMOSFET which has a reduced angular and directional dependence than that of standard MOSFET.

• Clinics in Shoulder and Elbow
• /
• v.10 no.2
• /
• pp.190-198
• /
• 2007

Purpose: The current study reports the clinical results of total elbow arthroplasties (TEA) which were Performed on patients with poor clinical and radiological results after initial surgeries for elbow fractures or dislocations. Materials and Methods: The clinical outcomes of twelve consecutive patients who underwent TEA after failed surgeries for elbow fractures or dislocations from january, 1995 to December, 2005 were evaluated. The initial diagnoses were distal humeral fractures in 8 cases and fracture-dislocations in 4 cases. The Mean period from the initial operations to the TEAs was 12 months. The mean folloow up period after TEA was 43 months. Results: The mean range of motion, in terms of active extension, activeflexion, supination, and pronation, improved from $14.2^{\circ}$, $96.7^{\circ}$, $50.8^{\circ}$ and $53.3^{\circ}$ to $5.4^{\circ}$, $122.1^{\circ}$, $63.3^{\circ}$ and $67.5^{\circ}$, respectively (p<0.05). RAdiolucent lines were found in 3 cases, which were 1 case of type 3, and 2 cases of type 4. All three loosening cases underwent revision TEAs. The mean postoperative Mayo elvow performance score was 79 point. There were 6 cases of excellent, 2 cases of good, and 4 cases in poor. Conclusion: Good clinical results were obtained after TEA performed in failed surgeries for elbow fractures of dislocations.