• Journal of the Korean Ceramic Society
• /
• v.29 no.12
• /
• pp.956-962
• /
• 1992

The predominant sintering mechanisms of low firing temperature ceramic substrate which consists of borosilicate glass containing alumina as a filler are the rearrangement of alumina particles and the viscous flow of glass powders. In this system, sintering condition depends on the volume ratio of alumina to glass and on the particle size. When the substrate contains about 35 vol% alumina filler and the average alumina particle size is 4 $\mu\textrm{m}$, the best firing condition is obtained at the temperature range of 900∼1000$^{\circ}C$. The extensive rearrangement behavior occurs at these conditions, and the optimum sintering condition is attained by smaller size of glass particles, too. The formation of cristobalite during sintering causes the difference of thermal expansion coefficient between the substrate and Si chip. This phenomenon degradates the capacity of Si chip. Therefore, the crystallization should be prevented. In the alumina filled borosilicate glass system, the crystallization does not occur. This effect may have some relation with aluminum ions in alumina. For aluminum ions diffuse into glass matrix during sintering, functiong as network former.

• Journal of the Korean Ceramic Society
• /
• v.17 no.4
• /
• pp.188-196
• /
• 1980

To investigate the corrosion behavior of the clay-bonded kaolin chamotte by molten aluminum, the mixture of 20 wt% fire clay and 80 wt% kaolin chamotte was prepared and fired in the temperature range 900~120$0^{\circ}C$. The specimens fired at each temperature were reacted with molten aluminum at 90$0^{\circ}C$. The results obtained in this experiment are as followed. 1) It was confirmed through X-ray diffraction analysis that the clay-bonded kaolin chamotte exposed to molten aluminum suffered penetration by the reaction of aluminum with silica forming alumina and metallic silicon. 2) Penetration was independent whether the silica existed as free or one component of mullite. 3) Penetration of the specimen fired at 90$0^{\circ}C$ was negligible while the others fired above 100$0^{\circ}C$ showed remarkable penetration. 4) Penetration rate at 90$0^{\circ}C$ was parabolically increased with the holding time as in the case of metal oxidation.

• Journal of the Korean Ceramic Society
• /
• v.19 no.2
• /
• pp.95-100
• /
• 1982

Instead of barium carbonate, domestic barite was used as the flux in manufacturing theinsulating porcelain. To avoid the problems arising from the decomposition of barite in the body during firing, BaO.$Al_2O_3$ was synthesized at $1300^{\circ}C$ for 5 hours. synthetic BaO.$Al_2O_3$ was mixed with other materials such as kaoline, alumina, clay, dolomite. The RO content (CaO. MgO. BaO) of the batches was varied from range of 4 to 14wt. % at 2wt. % - intervals, and firing temperature was varied from 1280 to 140$0^{\circ}C$-at 4$0^{\circ}C$ intervals The properties such as water absorption, bulk density. mechnical strength, specific resistance, and linear shrinkage were measured. The body containing 12 wt.% of RO content showed the satisfactory for the application in the Fixed Carbon Film Resistor.

• Journal of the Korean Ceramic Society
• /
• v.25 no.4
• /
• pp.390-398
• /
• 1988

Effects of atmospheres and adidtives on the grain growth of TiO2 ceramics were investigated. In the range of 1300~140$0^{\circ}C$, grain growth was increased in CO2 as compared with O2 atmosphere and the grain boundary migration activation energy was lower than the diffusion activation energy of oxygen ion in TiO2. Also, in the case of addition of oxides, the grain growth was increased by oxides acting as a acceptor andinhibited by oxides acting as a donor. From the above results, when the oxygen vacancy concentration was increased, the intrinsic grain boundary mobility was increased and the pore drag force was decreased due to the rapid densification. Also it seems that the pore was migrated by the surface diffusion rather than lattice diffusion.

• Journal of the Korean Ceramic Society
• /
• v.25 no.4
• /
• pp.397-407
• /
• 1988

Spinel, mullite and cordierite powders have synthesized from Mg(NO3)2.6H2O, Al(NO3).9H2O and SiCl4 solution by spray pyrolysis method. The two-fluid nozzle was used as an atomizer. The powders of sinel and mullite were synthesized above 80$0^{\circ}C$, but the cordierite composition was noncrystalline for all synthersizing temperature. Those noncrystalline powders were crystallized to $\alpha$-cordierite during calcining at 130$0^{\circ}C$ for 2hrs. The synthesized spinel, mullite and cordierite powders seem to be consisted of agglomerated hollow spherical particles. For all powders, the particle size ranged from submicron to about 3${\mu}{\textrm}{m}$ and mean particle size was about 1.4${\mu}{\textrm}{m}$ in diameter. The specific surface area values of spinel, mullite and cordierite powders were maximum for powders prepared at 100$0^{\circ}C$, and those were 45.9, 25.8 and 13.6$m^2$/gr, respectively.

• Convergence Security Journal
• /
• v.4 no.2
• /
• pp.53-60
• /
• 2004

We describe CHAP authentication for roaming service method of visited ISP subscriber on GPRS network. We also illustrate how visited mobile ISP subscriber can access ISP server and authenticate RADIUS in home network via Gateway GPRS Support Node (GGSN) on GPRS/UMTS network for wireless internet service and roaming. For this we propose the modified CHAP message format, PCO Message format at MT, and interworking message and format between GGSN and RADIUS in home ISP network for wireless internet service of mobile ISP subscriber at GPRS network in this paper. We also show authentication results when visited mobile ISP subscriber via CHAP at GPRS network accesses the RADIUS server in home ISP network.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.3
• /
• pp.68-74
• /
• 2003

Any one of the high precision spindle systems and guide way systems, the high stiffness of structure, the error compensation during assembly, high accuracy control system is inevitable technology for development of high precision machine tools. Especially, among these, design of spindle system is one of the most important technologies leading high precision of machine tool and high quality of manufactured products. A high speed and high precision spindle system, which will be used for final machining of ferrule, is designed considering the effect of heat cutting torque, cutting fore, and work-piece materials. The detailed design and analysis process are presented.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.119-124
• /
• 2006

The world which based on knowledge and information is changing significantly. In the various knowledge and information, the importance of GSIS has increased for efficient application and management of country. The Geomatics has made a change rapidly, observation methods have improved too. The existing acquisition of Geoinformation depend on aerial photogtaphs, but new technology Jike application of high resolution satellite images. SAR and LiDAR, is the fastest. especially, LiDAR surveying is most advanced active observation technology and Geoinfomtation is acquired by reflection of its laser pulse. In this study. the position accuracy of extracted building from LiDAR was evaluated by GPS surveying, then each data was made comparison between LiDAR's and GPS's data. After processing. the result of this study will be suggested basic data about application.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.6
• /
• pp.127-133
• /
• 2003

NSD(No Spin Differential) has been developed fer a military truck. A benchmarking study for USA and Russian NSD has been carried out. Axiomatic approach has been applied for improving the design. A test code for NSB has been developed and applied to the developed sample. In the test results of comparing the developed sample with the USA imported sample, three major characteristics-the noise, mobility and steerability - are in the range of the intended target. A practical process for the evolution design is proposed.

• Journal of Oriental Neuropsychiatry
• /
• v.10 no.2
• /
• pp.105-113
• /
• 1999

The purpose of this study was to investigate the effect of Sunhyangjungkisan on the learning and memory ability in rats. For this purpose we have evoked cerebral dysfunction in rats with NOS inhibitor and then performed the Morris water maze task for each rat. We have found that Sunghyangjungkisan have some improving effedts on impaired learning and memort ability in the NOS inhibitor treated rat. In these improving effects, memory effect was more evident then learning effect. This result implies that Sunghyangjungkisan may be one of useful prescriptions for treatment of vascular dementia after cerebral ischemia.