• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.128-128
• /
• 1999

산소이온 전도체로 잘 알려진 Yttira-Stabilizd Ziroconia(TSZ)는 연료전지, oxygen pumps, chemical gas sensor 등 다양한 electrochemical divices에 이용되는 고체 전해질의 하나이다. 특히 YSZ는 oxygen 및 oxygen과 평형상태에 있는 gas들을 검출하는 sensor의 electrolyte로서 가장 많이 쓰이고 있다. 현재 상용화되어 있는 YSZ Sensor는 전통적인 bulk 형태의 ceramic으로 제작된 것으로 충분한 ionic conductivity를 얻기 위해서는 $600^{\circ}C$이상의 operating temperature를 필요로 하나 YSZ를 박막으로 제조시 낮은 operating temperature를 뿐만 아니라 sensor의 소형화, 낮은 ohmic loss 및 다양한 응용이 가능한 장점을 가질 수 있다. 본 실험에서는 산소 이온 전도체로서 8mol%-YSZ 고체전해질을 RF-magnetron bias sputtering 법을 이용하여 증착하였다. 제조된 YSZ 박막을 이용한 산소감응 센서셀 구조는 SiO2/Ni-NiO/Pt/YSZ/Pt-기판이다. 센서셀의 정상상태에서의 기전력(electromotive force ; EMF)을 산소분압(Po:1.013$\times$103Ta ~1.013$\times$105Pa)과 측정온도(30$0^{\circ}C$~$700^{\circ}C$)를 변화시키며 측정하였다. 이론적인 기전력과 측정값 사이의 편차는 Po:1.565$\times$104Pa 이하의 산소분압에서는 컸지만 이 이상의 분압에서는 이론치에 근접한 값을 가졌다. 증착한 YSZ와 Ni-NiO 박막의 구조는 X-ray diffractometer(XRD)를 이용하여 결정구조를 알아 보았고, TSZ 박막의 표면 morphology 관찰은 Scanning electron microscopy(SEM) 이용하였다. 박막의 조성분석은 X-ray energy dispersive analysis(EDX)을 사용하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.05a
• /
• pp.51-51
• /
• 1997

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.188-189
• /
• 2003

현재까지 많은 자체집광(Self-focusing)현상대한 많은 실험적인 연구와 이론적인 연구가 있어 왔다. 이 대표적인 광학적 비선형 현상중 하나인 자체집광현상은 물질의 종류나 구조에 따라 여러 가지 형태로 나타난다. 특히, 근래들어 비선형 박막에서 일어나는 자체집광 현사을 근접장(near-field)영역에서 관측한 실험이 있어왔다. 회절한계이하의 빔 크기를 형성시키기 위하여 자체집광현상을 이용하려는 이러한 연구는 광 메모리와 같은 응용분야에 효과적으로 응용되리라 예상된다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.8 no.1
• /
• pp.19-25
• /
• 1997

Holographic zone plate (HZP) is fabricated by interfering a plane wave and a spherical wave in a dichromated gelatin (DCG) film obtained from Agfa 8E75HD plates. We have developed a simple theory for HZP considering optical nonlinearity of DCG material. Analysis of our theory for HZP shows that it has infinite focal points at distances f,f/2, f/3,,…. In experiment, we observed the corresponding focal points of up to f/6 when illuminating HZP by a plane wave. It is also shown that the beam profile around the first focal point measured by using a knife-edge scanning method has a Gaussian shape.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.6
• /
• pp.52-57
• /
• 1983

We report a theoretical study on wave propagation in magneto-optic thin-film waveguides. The field distribution and phase velocity of the guided hybrid modes are analyzed in terms of the phase difference of basic system modes and the Faraday rotation of the magneto-optic thin film. Splitting of the phase constant curves due to the F araday rotation is discussed. The present hybridmode analysis leads to a conversion matrix which shows that the distance dependence of the mode conversion in the guide is different from that in the bulk medium.

• Korean Journal of Materials Research
• /
• v.9 no.3
• /
• pp.301-306
• /
• 1999

Cu/Cr/polyimide 계에서 금속박막 두께와 폴리이미드 표면의 플라즈마 전처리 조건에 따른 필 테스트 결과로부터 Park와 Yu의 X-선 측정에 의한 방법과 Moidu등의 이론적 방법을 통애 Cr/polyimide 계면균열의 계면파괴에너지를 구했다. 두 방법으로 구한 박막의 소성일과 계면파괴어네지는 대부분의 경우에 대해 서로 잘 일치하였으며, 이와 같은 실험적 방법과 이론적 방법 모두 계면파괴에너지의 측정에 유용함을 알 수 있었다. 계면파괴에너지는 박막 두께에 거의 무관하였으며, 0.03, 0.036 그리고 0.05 W/$\textrm{cm}^2$의 rf플라즈마 밀도에 대해 각각 $46.8\pm$17.8, $170.3\pm$42.9 그리고 $253.9\pm$44.4 J/$\m^2$의 계면파괴에너지를 얻었다.

• Korean Journal of Optics and Photonics
• /
• v.12 no.5
• /
• pp.406-413
• /
• 2001

We report theoretical and experimental results for the wavelength and polarization selectivity of a fiber-to-planar waveguide coupler made of a side polished single mode fiber covered with a planer waveguide incorporating a thin metal film. A simple but exact approach to obtain the modal properties of multilayer planar waveguide with a thin metal film is described. The device was modeled into equivalent 1 dimensional structure and its behaviour was analyzed based on coupled mode theory. The effects of metal film thickness and refractive index of superstrate on the device properties were measured and explained.

• Journal of the Korean Ceramic Society
• /
• v.39 no.3
• /
• pp.233-239
• /
• 2002

Reflection properties of $SiO_2$/ITO (Indium Tin Oxide) thin films coated for electromagnetic shielding, anti-static and anti-reflection on the front surface in CRT were studied. The behavior of reflectance as a function of thickness of $SiO_2$/ITO was investigated and applied to theoretical anti0reflection model of double layers and three layers. As the thickness of ITO layer increased, the deviation from theoretical value increased because uniformity of film deteriorated by pore. Because of the effect of mixed layer of $SiO_2$ and ITO, experimental reflectance showed better acceptance to the three layer antireflection model of $SiO_2$/$SiO_2$+ITO/ITO than the two layer model. Based on the theoretical antireflection design, the double layer whose thickness of $SiO_2$ and ITO were 90, 65 nm, respectively appear 2.5% in reflectance at standard wavelength, 550 nm. This phenomenon was similar to theoretical reflectance in visual range.

• Aerospace Engineering and Technology
• /
• v.2 no.2
• /
• pp.133-141
• /
• 2003

When superplastic forming process is employed in manufacturing spherical pressure vessel, the thickness and spherical profile are not constant and varies during the forming process. In the current study, theoretical analysis for the prediction of thickness change was carried out under the consideration of membrane theory which has been employed in Kuglov et. al.'s study. Then the thickness of initial blank to obtain the required thickness at the final forming step, the time vs. pressure profile which yields uniform deformation in blank, and the thickness distribution according to the position at each forming step have been determined. The employed model and the developed analytical code were verified throughout comparing the theoretical predictions at each forming stage with the experimental results shown in literature.

• Journal of the Korean Magnetics Society
• /
• v.5 no.2
• /
• pp.109-111
• /
• 1995

We suggest the phenominological model to determine the mangetoelastic coupling coefficient in Cu/Ni/Cu thin films by considering effective anisotropy energy with magnetic film thicknesses. This indirect determination can be applied other single crystalline systems.