• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.344-350
• /
• 2012

New pressure sensitive adhesives (PSAs) for polarizer film were prepared by electron beam (e-beam) radiation to acrylic copolymers, and their adhesive properties were investigated. The acrylic copolymers were synthesized by free radical polymerization of $n$-butylacrylate (BA), 2-hydroxyethyl methacrylate (HEMA), and acrylic acid (AA). The acrylic copolymers were coated on PET release films to a thickness of 25 ${\mu}m$, laminated to polarizer films, and then radiated with e-beam at room temperature. Gel fractions of all the acrylic copolymers after e-beam radiation at 50 kGy were higher than 93%, and their crosslinking densities were increased with increasing the content of HEMA units. PSA prepared by e-beam radiation of acrylic copolymer synthesized with a feed ratio of BA/HEMA/AA = 89.5/10/0.5 (w/w/w) at a dose of 50 kGy exhibited the best adhesion performances in terms of peel strength, creep resistance, durability and reliability, and light leakage. It is expected that the preparation method of PSAs via e-beam irradiation will improve the producibility and workability of polarizer film for liquid crystal display.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.1
• /
• pp.23-35
• /
• 2004

The weathering characteristics of periodically submerged sedimentary rocks in the Sayeon dam, Ulsan was examined by field work, electron probe micro-analysis, X-ray diffraction, and X-ray fluorescence spectrometry. Analysis of fracture zone and exfoliation showed the submerged sedimentary rocks have undergone severe mechanical weathering. Mechanical weathering in the water-rock interface accelerated chemical weathering, such as dissolution and alteration of the most of minerals except for quartz in the weathering zone. The dissolution of carbonates specially calcite, is remarkable creating the cavities, whereas formation of minerals including clay minerals is not active. The sedimentary rocks have been periodically submerged for a certain period of time, and have repeated freezing and thawing. This mechanical weathering favored infiltration, which accelerated mineral dissolution. The high content of easily soluble carbonate of the sedimentary rocks is likely the major cause of intense chemical weathering. The dissolved elements within the infiltrated water interrupted the occurrence of clay and weathering minerals, and expend fractures by infiltrated water accelerated weathering process.

• Journal of Conservation Science
• /
• v.29 no.1
• /
• pp.35-45
• /
• 2013

The Clay Statues of Donggwanwangmyo Shrine (Treasure No. 142) are highly damaged physical weathering which are crack, exfoliation. Pigment of surface are discolored by chemical weathering like dust. The result of ultrasonic velocity measurement, low velocity zone was measured the lowest part of Woojanggun Statue. Deficiency condition of pigment layer was evaluated quantitatively through infrared Thermography. As a result, exfoliation part was detected at high temperature. Making techniques of the Clay statues were identified by gamma rays, infrared TV, SEM. All Clay Statues were founded on wood base and joints of wood were fixed using thin iron wires. After wood base was twisted a straw rope, it was made by clay. Clay was blended with rice straw to prevention of crack and exfoliation. The upper side of clay layer was coated with Hanji(Korean handmade paper) and cotton in order to isolate the pigment layer.

• Polymer(Korea)
• /
• v.27 no.2
• /
• pp.129-134
• /
• 2003

It has been known that the intercalation of long alkyl chains in montmorillonites (MMT) increased the hydrophobicity as well as gallery spacing of UT, which has influenced on the exfoliation behavior of various polymers. A series of organophilic MMTs were synthesized from the water/isopropyl alcohol solution of MMT with ammonium salts of various alkyl amines. The properties of obtained MMTs such as thermal decomposition temperature, gallery spacing as well as hydrophobic property were investigated. The X-ray diffraction experiments on organophilic montmorillonite demonstrated that the increase of length of alkyl substituent resulted in increase in the spacing between silicate layers, which was ranged from 13.1 to 29.4 $\AA$. On the other hand, introduction of (di-, tri-) alkyl substituents in ammonium salts decreased water absorption of organophiplic montmorillonite to 2.7%.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.1
• /
• pp.22-29
• /
• 1999

This paper descrived the changes of peel strength wrinkle recovery and dimensional stability after fusing 4 different wool face fabrics with 3 different fusible interlinings. The fusing condition was conducted by fusing press machine under 4kg.f/cm2 at 15$0^{\circ}C$. To determine the effect of the varous physical properties of the fused fabrics face fabrics and interlinings on the peel strength wrinkle recovery and dimensional stability(hygral expansion and relaxation shrinkage) of fused fabrics correlation among the KES values of fused fabrics face fabrics and interlinings to the peel strength rinkle recovery and dimensional stability of fused fabrics were expeerimentally analyzed,. As the results the peel strength was mainly influenced by the cover factor of face fabric and interlinings. After fusing wrinkle recovery and hygral expansion were decreased. The cover factor wrinkle recovery weight thickness shear rigidity and frictional properties of face fabric and the thickness of fused fabrics were not influence to the wrinkle recovery of fused fabrics. In addition the dimensional stabilities of fused fabrics were mainly influenced by the tensile and frictional properties of the wrinkle recovery of fused fabrics. In addition the dimensional stabilities of fused fabrics were mainly influenced by the tensile and frictional properties of the face fabrics.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.427-427
• /
• 2011

그래핀은 탄소원자가 육각형의 벌집형태로 배열되어 있는 원자단위 두께의 가장 얇은 재료중의 하나이다. 이는 우수한 기계적, 전기적, 광학적 특성을 지니고 있어 다양한 분야로의 응용이 가능할 것으로 예측되고 있다. 그래핀의 산업적 응용을 위해서는 대면적으로 두께 균일도가 높은 그래핀을 저렴한 방법으로 합성하는 것이 무엇보다도 우선적으로 요구된다. 그래핀을 얻는 방법으로는 물리 화학적 박리, 탄화규소의 흑연화, 열화학기상증착법(thermal chemical vapor deposition; TCVD) 등의 다양한 방법이 있으며, 현재로선 그 중 TCVD법이 대면적으로 두께균일도가 높은 그래핀을 합성할 수 있는 가장 적합한 방법으로 인식되고 있다. 그러나 이 방법은 탄소가 포함된 원료가스를 분해하기 위하여 고온의 공정이 요구되는 단점이 있다. 이러한 이유로 최근 그래핀은 저온에서 합성하기 위한 많은 연구들이 진행 중에 있으며 그 결과가 속속 보고 되고 있다. 본 연구에서는 고주파 플라즈마가 결합된 TCVD장치를 이용하여 원료가스를 효율적으로 분해함으로서 그래핀의 저온합성을 도모하였다. 기판은 300 nm 두께의 니켈박막이 증착된 산화막 실리콘 기판을 사용하였으며, 원료가스로는 메탄을 사용하였다. 실험결과, 350 W의 파워로 플라즈마를 방전하여 30분간 합성을 수행하였을 때 약 $450^{\circ}C$ 근처의 저온에서 수 겹의 그래핀이 합성 가능한 것을 확인하였다. 합성된 그래핀은 분석의 용이함 및 향후 다양한 응용을 위하여 산화막 실리콘 기판 및 투명 고분자 기판 등으로 전사하였다. 그래핀의 특성분석을 위해서는 광학현미경, 라만 분광기, 투과전자현미경, 자외 및 가시선 분광광도계, 4탐침측정기 등을 이용하였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.3
• /
• pp.7-12
• /
• 2018

The effects of Ru deposition temperature and post-annealing conditions on the interfacial adhesion energies of atomic layer deposited (ALD) Ru diffusion barrier layer and Cu thin films for the advanced Cu interconnects applications were systematically investigated. The initial interfacial adhesion energies were 8.55, 9.37, $8.96J/m^2$ for the sample deposited at 225, 270, and $310^{\circ}C$, respectively, which are closely related to the similar microstructures and resistivities of Ru films for ALD Ru deposition temperature variations. And the interfacial adhesion energies showed the relatively stable high values over $7.59J/m^2$ until 250h during post-annealing at $200^{\circ}C$, while dramatically decreased to $1.40J/m^2$ after 500 h. The X-ray photoelectron spectroscopy Cu 2p peak separation analysis showed that there exists good correlation between the interfacial adhesion energy and the interfacial CuO formation. Therefore, ALD Ru seems to be a promising diffusion barrier candidate with reliable interfacial reliability for advanced Cu interconnects.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.3
• /
• pp.149-159
• /
• 2018

The Gyeongju Bunhwangsa Stone Brick Pagoda, which was built with bricks of andesite, is the oldest brick stone pagoda of Silla period. The damage patterns in the stone pagoda are pollutants such as white crust, black crust, discoloration, soil adsorption, and microorganisms, and repair materials. The damage pattern of structural factors in the Stone Brick Pagoda is a bulging phenomenon. According to the X-ray diffraction analysis, white crust are mainly consist of calcite ($CaCO_3$) and thermonatrite ($Na_2CO_3{\cdot}H_2O$) that evaporite finds in nature. Damage pattern varies depending on location of stone pagoda. The pollutants are first story body of pagoda. The microorganisms are confirmed at base, lion statues, first and second story capstone, and repair materials observed at base. The bulging phenomenon appeared on the first story body of the pagoda. Occupancy rates by damage type were higher in the order of microorganisms, pollutants, repair material, bulging phenomenon, and peeling. The highest percentage of individual damage patterns were black microorganisms (39.3%), followed by lichen (17.9%), discoloration (8.0%), white crust (5.5%), cement mortar (5.1%) and peeling (3.1%).

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.4
• /
• pp.367-375
• /
• 2014

In numbers of kinds of heat exchanger, the shell-tube heat exchanger is the most commonly used type of heat exchanger in the industry field. In order to improve the thermal performance of the heat exchanger, this study was analyzed heat transfer characteristics according to arrangement of baffle and direction of baffle and bump phase of baffle about shell-tube heat exchanger using appropriate SST (Shear Stress Transport) turbulence model for flow separation and boundary layer analysis. As the boundary condition for CFD (Computational Fluid Dynamics) analysis, the inlet temperature of shell side was constantly 344 K and the variation of the water flow rate was 6, 12, 18 and 24 l/min. As the result of analysis, zigzag baffle arrangement enhances heat transfer rate and pressure drop. Furthermore, in the direction of the baffle, heat transfer rate is more improved with vertical type and angle $45^{\circ}$ type than existing type, and pressure drop was little difference. Also, the bump shape of baffle surface contributes to heat transfer rate and pressure drop improvement due to the increased heat transfer area. Through analysis results, we knew that the increase of the heat transfer was influenced by flow separation, fluid residual time, contact area with the tube, flow rate, swirl and so on.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.153-153
• /
• 1999

platinum 유기착화합물을 사용하여 유리 기판 위에 Pt를 증착시켰다. Pt를 증착하기 위하여 Pt 착화합물을 용해 시킨 후, 유리 기판을 용액속에 담근 후 가열하여 Pt막을 증착하였다. 증착 후 Pt의 면저항은 200~75$\Omega$의 값을 나타내어 비교적 높은 저항값을 나타내었다. 높은 저항값을 낮추기 위해 진공 10-5Torr에서 50, 100, 150, 25$0^{\circ}C$로 열처리를 하였다. 이러한 저항값을 변화의 원인을 살펴보기 위하여 X-선 회절법을 이용하여 결정성의 변화를 살펴보았고, 화학적 조성의 변화는 X-ray 광전자 분광법을 이용하여 조사하였다. 열처리 전 Pt막은 비정질 상태를 나타내었으나, 6$0^{\circ}C$에서 30분간 열처리한 후에는 결정성이 증가하는 것으로 관찰되었다. 열처리 후 결정방향은 {111] 방향이 주 방향이였으며 [002] 방향의 피크도 관찰되었다. 따라서 성장된 막은 다결정 막임을 알 수 있었다. XPS를 이용하여 조성을 조사하여 본 결과 열처리하지 않은 시료의 경우 유기물과 반응하여 Pt의 피크가 넓게 나타나나 열처리 후에는 유기물이 분해되어 Pt의 고유한 피크를 관찰할 수 있었다. 따라서 전기전도도의 변화는 유기물의 분해를 통하여 순수한 Pt로 변해가면서 감소하는 것으로 생각되어 지며 결정성 또한 전기전도도 변화에 중요한 역할을 함을 알 수 있었다. 기존의 방법을 이용하여 Pt를 증착할 경우 기판과 쉽게 박리 되는 현상이 관찰되었으나 본 방법을 이용하여 증착된 Pt 박막의 경우 열처리 후에는 기판과의 접착력이 기존의 방법보다 뛰어나 박리되는 현상이 관찰되지 않았다.$ 이상에서 안정한 것을 볼 수 있었다. 텅스텐 박막은 $\alpha$ 및 $\beta$-W 구조를 가질 수 있으나 본 연구에서 성장된 텅스텐은 $\alpha$-W 구조를 가지는 것을 XRD 측정으로 확인하였다. 성장된 텅스텐 박막의 저항은 구조에 따라서 변화되는 것으로 알려져 있다. 증착조건에 따른 저항의 변화는 SiH4 대 WF6의 가스비, 증착온도에 따라서 변화하였다. 특히 온도가 40$0^{\circ}C$ 이상, SiH4/WF6의 비가 0.2일 경우 텅스텐을 증착시킨 후에 열처리를 거치지 않은 경우에도 기존에 발표된 저항률인 10$\mu$$\Omega$.cm 대의 값을 얻을 수 있었다. 본 연구를 통하여 산화막과의 접착성 문제를 해결하고 낮은 저항을 얻을 수 있었으나, 텅스텐 박막의 성장과정에 의한 게이트 산화막의 열화는 심각학 문제를 야기하였다. 즉, LPCVD 과정에서 발생한 불소 또는 불소 화합물이 게이트의 산화막에 결함을 발생시킴을 확인하였다. 향후, 불소에 의한 게이트 산화막의 열화를 최소화시킬 수 있는 공정 조건의 최저고하 또는 대체게이트 산화막이 적용될 경우, 개발된 연구 결과를 산업체로 이전할 수 있는 가능성이 높을 것을 기대된다.박막 형성 메카니즘에 큰 영향을 미침을 알 수 있었다. 또한 은의 전기화학적 다층박막 성장은 MSM (monolayer-simultaneous-multilayer) 메카니즘을 따름을 확인하였다. 마지막으로 구조 및 양이 규칙적으로 조절되는 전극의 응용가능성이 간단히 논의될 것이다.l 성장을 하였다는 것을 알 수 있었다. 결정성