• Title/Summary/Keyword: 박리발생

Search Result 621, Processing Time 0.033 seconds

A Study on the Impact Damage and Residual Strength of CFRP Composite Laminates under Low Temperature (저온하에서 CFRP 적층재의 충격 손상과 잔류 강도 -저/고온하에서 CFRP 적층재의 충격 손상을 중심으로 -)

  • Yang, I.Y.;Jung, J.A.;Cha, C.S.
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.17 no.1
    • /
    • pp.1-10
    • /
    • 1997
  • In this paper, the effects of temperature change (low and high temperature) on the impact damages of CFRP laminates was experimentally studied. Composite laminates used for this experiment are CF/epoxy orthotropic laminated plates, which have two-interfaces $[0^{\circ}\;_6/90^{\circ}\;_6]s$ and $[0^{\circ}\;_4/90^{\circ}\;_4]s$. And CF/PEEK orthotropic laminated plates, which have two-interfaces $[0^{\circ}\;_4/90^{\circ}\;_4]s$. And, this study aims experimentally to present the interrelations between the impact energy vs. impact damages (i.e. delamination area and matrix crack) of CFRP laminates (CF/epoxy, CF/PEEK) subjected to FOD(foreign object damage) under low and high temperatures. A steel ball launched by the air gun collides against CFRP laminates to generate impact damages.

  • PDF

Retrograde Aortic Dissection after Thoracic Endovascular Aortic Repair for Descending Aorta - 2 case reports- (하행 대동맥 내 스텐트-도관 삽입 후 발생한 역행성 대동맥 박리 - 2예 보고 -)

  • Hong, Soon-Chang;Kim, Jung-Hwan;Lee, Hee-Jeong;Youn, Young-Nam
    • Journal of Chest Surgery
    • /
    • v.43 no.6
    • /
    • pp.758-763
    • /
    • 2010
  • In current era, thoracic endovascular aortic repair (TEVAR) has gained popularity. But, it bears the risk of serious complications such as treatment failure from endoleak, retrograde aortic dissection caused by injury of aortic wall at landing zone, or aortic rupture resulting from stent graft infection. We report two cases of surgical repair of retrograde aortic dissection after TAVAR applied to acute Stanford type B aortic dissection or traumatic aortic disruption.

Risk analysis of red water and turbid water based on seasonal water usage (계절별 수도사용량에 따른 적수 및 탁수발생 위험도 분석)

  • Han, Jin Woo;Lee, Sang Mok;Kwon, Hyuk Jae
    • Journal of Korea Water Resources Association
    • /
    • v.56 no.7
    • /
    • pp.451-460
    • /
    • 2023
  • In this study, the risk of red water and turbid water occurrence was analyzed by classifying it into detachment risk and deposition risk. First, risk factors for red water and turbid water were determined, and hydraulic analysis was conducted considering seasonal water consumption. The applied area was Cheongju City, and the risk analysis was conducted across 13 areas, and the areas with high deposition risk and high detachment risk were selected. The high risk of both detachment and deposition can be judged as an area with a very high probability of causing water quality problems. The areas with the highest deposition risk and detachment risk are the old towns of Nae deok1-dong and Yul1yang-dong, which are the oldest areas in Cheongju City with an age of more than 30 service years of pipe installation. By analyzing the risk of deposition and detachment, it will be possible to strengthen the maintenance function of the water supply network to provide the safe water to citizens and increase their confidence for tap water.

Adhesion Improvement of Polymer/Metal Interface Produced by Surface Treatment (표면 처리에 의한 고분자/금속 계면에서의 접착력 향상)

  • 박수진;서민강;김학용;이덕래
    • Proceedings of the Korean Fiber Society Conference
    • /
    • 2002.04a
    • /
    • pp.489-492
    • /
    • 2002
  • 고분자/금속 복합재료는 현대 전자산업에 중요한 역할을 하고 있다. 그러나 이들간의 계면은 고분자의 수축 또는 계면 안정성의 저하로 인하여 박리가 일어나게 된다. 즉, 계면의 접합이 떨어지게 되면 전기 화학적인 반응이 계면에서 발생하여 드러난 금속부위는 산화되고 산소가 환원될 때 발생하는 OH기와 같은 라디칼들에 의해 금속과 고분자 사이의 결합이 파괴되어 금속표면으로부터의 고분자의 박리가 발생한다. (중략)

  • PDF

Development of the Water-borne Separation Media Polymer for a Moving Historic Sites (자기분산형 수용성 에폭시를 이용한 유구 이전용 박리제의 개발)

  • Han, Won-Sik;Hong, Tae-Kee;Lim, Sung-Jin;Wi, Koang-Chul
    • Journal of Conservation Science
    • /
    • v.25 no.2
    • /
    • pp.171-178
    • /
    • 2009
  • When we considered the superior ability of the semi-water soluble urethane 1st transcription and final epoxy products, the stability for moving historic sites depend on physical properties and the peel off state of separation media. In this paper, we synthesised three type of water-borne epoxy solution without using a surfactant, and investigated the peel off state, physical properties, and the state between urethane surface and epoxy surface after exfoliation. The life time of water-borne separation media is over the 60 days. When it is used the 30% solution of water-borne separation media, it made good separation of urethane pre-products surface and epoxy final product surface and no color change. The separation tension pressure is about 15~50 kg/$cm^2$ and there is no surface whitewash phenomenon. We suggest that this water-borne epoxy will be best material as separation media of low viscosity type.

  • PDF

A Case Report of Acute Type II Aortic Dissection in a Patient with Marfan's Syndrome and Who Was 24 Weeks Pregnant - A case report - (임신 24주 Marfan 증후군 환자에서의 급성 제II형 대동맥 박리 - 1예 보고 -)

  • Hwang, Ui-Dong;Ryu, Yang-Gi;Lim, Ju-Yong;Chung, Cheol-Hyun
    • Journal of Chest Surgery
    • /
    • v.40 no.7 s.276
    • /
    • pp.508-511
    • /
    • 2007
  • The causes of aortic dissection are usually hypertension, connective tissue disease such as Marfan syndrome, congenital valvular abnormality such as bicuspid aortic valve, iatrogenic injury, pregnancy and drugs. Previous studies have shown that 50% of all dissections in women less than 40 years age were associated with pregnancy. Almost all aortic dissections during pregnancy occur during the third trimester or during labor and delivery. Marfan's syndrome is a particularly important predisposing factor for aortic dissection during pregnancy. We report here on a case of surgical treatment for acute type II aortic dissection in a Marfan syndrome patient who was 24 weeks pregnant, and we include a review of literature.

Recovery of Sn, Cu, Pb and HNO3 from the spent solder stripping solutions (폐솔더 박리액에서 주석, 구리, 납 및 질산의 회수)

  • An, Jae-U;Ryu, Seung-Hyeong;Kim, Tae-Yeong;Gang, Myeong-Sik;An, Nak-Gyun
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2014.11a
    • /
    • pp.89-90
    • /
    • 2014
  • 인쇄회로기판 패턴도금 박리공정 중 발생하는 폐솔더 박리액은 주석, 구리, 철, 납 등 유가금속이 함유된 질산계 폐액이다. 본 연구에서는 이러한 폐솔더 박리액에서 질산과 유가금속을 체계적으로 회수하는 기술을 개발하고자 하였다. 먼저 폐액을 $80^{\circ}C$에서 3시간 정도 반응시켜 주석을 $SnO_2$ 상태로 90% 이상 회수가 가능하였다. 주석이 회수되고 구리, 철, 납만이 존재하는 질산계 폐솔더 박리액에서 확산투석을 이용하여 질산을 94% 이상 회수가 가능하였고 회수된 질산의 농도는 5.1 N 이었다. 질산을 추출한 폐액에서 침전제로 옥살산(Oxalic acid)을 사용하여 구리를 구리옥살레이트 상태로 침전시켜 타금속이온과 선택적으로 분리하였다. 마지막으로 폐액 중 용해되어있는 납을 $65^{\circ}C$이상에서 철 스크랩을 이용한 세멘테이션을 통하여 회수하였다.

  • PDF

박리지연 및 양항비 상승효과를 가진 익형내부 구멍효과 설계 최적화 및 단순화 연구

  • Kim, Yeong-Jin;Choe, In-Jun;Nam, Do-U
    • Proceeding of EDISON Challenge
    • /
    • 2016.03a
    • /
    • pp.518-522
    • /
    • 2016
  • 항공기 운항 중 사고가 가장 많이 발생하는 순간이 이착륙 순간이다. 사고의 원인은 실속(Stall)으로 인한 조종성 상실, 버드 스트라이크 등의 이유들이 있다. 본 연구에서는 항공기 날개에 구멍을 내서 구조적인 변화를 통해 이 착륙 시에 가장 많이 적용되는 받음각인 $10^{\circ}$에서 흐름의 박리가 지연되고, 양항비가 상승되는 효과를 기대하고 $10^{\circ}$이외의 받음각에서 박리가 지연되는지 해석을 진행하였다. 본 연구에서의 최종적 목표는 곡선형태의 구조변화 형상과 이를 실제 항공기에 적용이 가능하도록 제작성과 경제성을 고려하여 단순화 하는 작업을 진행하고 곡선 형태와 같은 효과를 얻고자 해석을 진행하였다. 받음각 $10^{\circ}$에서 해석을 진행한 경우 모든 형상들이 흐름의 박리를 지연시키는 효과를 가져왔다.

  • PDF

Separation control using multi-array/multi-location synthetic jet (Multi-array/multi-location synthetic jet을 이용한 박리 제어)

  • 김상훈;김종암
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.34 no.8
    • /
    • pp.8-15
    • /
    • 2006
  • Separation control has been performed using the multi-array/multi-location synthetic jet on NACA23012 at high angle of attack. The flow control using single synthetic jet shows that stall characteristics can be substantially improved with delayed separation point. Theses results show the characteristic of unsteady flow of single synthetic jet. Beside, we researched on multi-array synthetic jet to obtain applicable synthetic jet velocity. Multi-location synthetic jet is proposed to eliminate small vortex on suction surface of airfoil. With the results, we concluded that the flow around airfoil is stable by high frequency synthetic jet with elimination of small vortex and confirmation of stable flow. Moreover, performance of multi-array/multi-location synthetic jet can be improved by changing phase angle of multi-location synthetic jet.

층류 박리된 관유동에 관한 실험적 연구

  • 이상준
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.14 no.4
    • /
    • pp.937-944
    • /
    • 1990
  • 본 연구에서는 파이프내에 부분 오리피스판을 장착하여 이 장애벽 전후에서 발생하는 유동현상을 박리 전단층의 유동구조와 재부착 경계층을 중심으로 실험적으로 연구하였다. 측정방법으로 유동의 속도장변화를 구하기 위하여 NMR 위상 영상법을 사용하였고, 과망간산칼륨을 염료로 가시화 실험을 수행하여 그 결과를 비교 검토하였 다.