• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.219-221
• /
• 2004

국가의 규제기관과 처분장에서는 방사성 폐기물의 안전한 영구처분을 위하여 폐기물 수용(인수)기준을 폐기물 발생자에게 준수토록 요구하게 되는데 이러한 폐기물 수용(인수)기준은 처분시설의 가동동안 인간과 환경 보호 그리고 최대 300년간의 제도적 통제기간을 고려하여 처분장의 안전성 확보를 위하여 설정되어진다. 폐기물 수용(인수)기준중 고화체의 안정성 평가와 관련하여 미국(NRC/BTP)은 폐기물의 종류와 고화매질에 따라 유리수, 압축강도, 방사성 조사특성, 미생물 영향 특성, 침수 및 침출 특성, 열순환 특성 등에 대하여 표준시험법을 제시하였으며, 또한 그의 기술기준치도 제시하고 있다. 그리고 프랑스(DRDD/ BECC)에서는 미국보다 매우 세밀하게 평가항목들을 분류하는 등의 처분장 운영국가에서는 고화체의 안정성관련 평가시험들을 처분 환경과 처분방식에 맞게 표준화하고 있다. 한편 국내에서는 과기부 고시 제2001-32호 "중.저준위 방사성폐기물 인도규정"이 있으나 이에는 고화체 관련하여 정성적인 안정성에 대하여서만 기술되어 있다. 이에 따라 원전폐기물 고화체에 대한 안정성 평가를 위한 시험법을 선정하기 위하여 아래 그림과 같은 절차에 따라 수행토록 하였다. 우선 대표적인 천층처분 운영국가인 미국과 프랑스의 시험법 그리고 IAEA 권고 시험법과 유사관련 한국 산업표준법들을 조사하고, 이들 시험법들의 주요 차이점을 기술적 관점에서 비교평가하고, 이어서 모의 방사성 및 비방사성 고화체를 이용하여 상기 시험법들을 각각 적용하고 또한 이들 시험법들간의 차이(시험 조건, 시편의 크기 등)에 기인한 상호 비교시험을 통하여 얻어진 시험결과들을 종합적으로 비교 검토하여 보수적 관점에서 시험법을 선정하는 것으로 방향을 잡았다. 이때 시험결과를 얻기 위한 모든 과정에 품질보증 활동을 적용키로 하였으며, 시험결과 분석/평가 과정과 시험법 선정에 각계(규제기관, 학계, 발전소 현장 및 산업계 등) 전문가로부터 기술자문회의를 통하여 자문 의견을 받기로 하였다. 특히 현재 폐기물 인수 기술기준치가 설정된 국가의 시험법을 심층 있게 검토하기로 하였다.검토하기로 하였다.

• Journal of the Korea Concrete Institute
• /
• v.16 no.5 s.83
• /
• pp.645-650
• /
• 2004

As time passes, bridge structures require extension work on bridge in use from various effects such as social economical, or traffic environment change. When the concrete is poured at the connection of extension work initial curing concrete is influenced by vibration of vehicles that are passing through the old bridge superstructure. Concrete at early curing stage in construction site should be properly protected, enough to have established sufficient integrity to withstand outside vibration, impact etc. Currently there is no standard specification or regulation in our country. In this paper, experimental variables were divided by vibration velocity and time of loading, and concrete compressive strength and bond strength were measured.

• Journal of Energy Engineering
• /
• v.15 no.3 s.47
• /
• pp.202-208
• /
• 2006

Although the importance of good conservation of historic sites including ancient royal tombs is well aware, still not much attention has been paid for the facilities and systems to preserve those historic sites, which includes precious artifacts as wall paints and carved works, etc. Even the general understanding about the environment of the underground space or tombs is not satisfactory. In the present study, vibration levels due to the operation of an HVAC system to maintain the desired indoor temperature and humidity are investigated experimentally. According to the measured data, the level of vibration inside the present model tomb with the indoor unit inside, showed order of magnitude less values than the Swiss Standards, but still higher than the value suggested by German standards, which is, zero. Further study will be pursued for cases including different ways of installation, because the vibration level depends not only on the system design, but also on the installation methods.

• Journal of the Society of Disaster Information
• /
• v.14 no.2
• /
• pp.115-121
• /
• 2018

Purpose: The purpose of this study is to identify the legal status of enterprise disaster management standards established as part of business continuity management and to ensure resilience, and to improve the problem of application of industry disaster management standards in related industries. Method: We collected relevant data for the study and conducted a literature review on the logistical definition of laws and academic systems such as constitution and enterprise disaster reduction law, and HLS structure. Results: It has been confirmed that the enterprise disaster management standards in the Enterprise Disaster Management Standard are higher in the legal status than the ISO 22301: 2012 international standard. Conclusion: Through this study, it is necessary to establish a development direction of application and related regulations by clarifying the enterprise disaster management standard according to the enterprise disaster reduction law.

• Research in Plant Disease
• /
• v.26 no.3
• /
• pp.134-143
• /
• 2020

The goal of this manuscript is to determine seed-borne plant pathogenic bacteria and phytoplasmas among quarantine pests in Korea. Four and two prohibited bacteria and phytoplasmas, respectively, and 35 and 17 restricted bacteria and phytoplasmas, respectively, were assessed whether they are seed-borne or not based on preliminary reports. As results, two species of prohibited bacteria, eighteen species of restricted bacteria, and one species of restricted phytoplasma have been determined as being seed-borne plant pathogenic bacteria. Thus, quarantine fields must account for these lists once inspection has been conducted on imported seeds and also use of these lists can help to reduce the production of new diseases that can spread from infected imported seeds.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.57
• /
• pp.35-60
• /
• 2013

The Incoterms which is one of the most useful international instrument for sale of goods provides when a contract goods deliver, risk passes and how costs are allocated between seller and buyer on the contract as long as they agree to use a rule of the Incoterms rules. The Incoterms rules have come into effective to use for an international or domestic trade of goods since January 2011, which have been modified several times since these established by ICC in 1936. The origin of Incoterms rules may had been appeared from English traditional FOB terms that had been affected to American regulations for the sale of goods. The Incoterms rules which had been started from the traditional English FOB terms and American FOB terms have been expanded other trade terms, such as CIF. Although FOB is based on the COD(Cash on Delivery), it is possible replaced COD to CAD(Cash against Delivery) through the use of Bill of Lading and Letter of Credit in the international sale of goods between seller and buyer according to the development of infrastructures on the international commercial transactions. This article exercises the process of transition of the Incoterms rules, being based on the English and American traditional FOB contract form through review literatures, judical precedents and provisions. Then this article provides some feasible alternatives to attempting to resolve some regulation problems of FCA, CPT, CIP, and D-rules in the Incoterms$^{(R)}$ 2010.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.3
• /
• pp.439-452
• /
• 1994

A method to optimize the cost of R/C frames and an algorithm of the optimal limit state design for R/C frames subjected to dynamic loads are presented. The modal superposition method was used to find the dynamic responses of the frames. Each member of R/C frame is made up of more than two elements and the stiffness matrix and consistent mass matrix of three d.o.f in the node of each element was used to include axial, shear and flexural effects. The objective function to be minimized formulated the cost of materials, steel and concrete, and optimised to satisfy the behaviors of R/C frame and each constraint imposed by the limit state requirements. Both objective function and each constraint are derived in terms of design variables which include the effective depth, beam width, compression and tension steel area, and column shear steel area. A few applications are presented which demonstrate the feasibility, the validity and efficiency of the algorithm for automated optimum design of R/C frames where dynamic behavior is to be considered.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.65
• /
• pp.1-20
• /
• 2015

International Commercial Terms, known as "Incoterms", are internationally accepted terms defining the responsibilities of exporters and importers in the arrangement of shipments and the transfer of liability involved at various stages of the transaction. The latest version of Incoterms rules were revised in 2010, so called Incoterms$^{(R)}$ 2010 which is the eighth set of pre-defined commercial terms published by the International Chamber of Commerce(ICC) in 1936. It has been already past 5 years since Incoterms$^{(R)}$ 2010 became effective January 1, 2011. At this point, we should examine the latest version of Incoterms whether the rules are not satisfied with the practical commerce because the customs and practices of commerce change constantly. The main purpose of this article is to seek a difference between the present commercial customs and practice and the rules of Incoterms$^{(R)}$ 2010. In addition, if there is any difference between them, an alternative resolution would be suggested. This article exercises the process of transition of the Incoterms rules, especially CIP, DDP, and CIF among 11 rules of Incoterms$^{(R)}$ 2010. Then this article provides some feasible alternatives to attempting to resolve some regulation problems of CIP, DDP, and CIF in the Incoterms$^{(R)}$ 2010. For examples, the practical meaning is different between "if customary or at the buyer's request" and "if agreed or customary" in CIF and CIP, especially a negotiable documentary being used. Furthermore, the interpretation of transfer of risks on the afloat goods in string sales in CIF term.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.122-130
• /
• 2018

The International Maritime Organization has enacted mandatory performance standards for protective coatings (PSPC), and as a result, shipyards must perform 2R or 3-pass milling on the edges of color plates. However, manual milling could result in many problems in terms of work environment and productivity. Therefore, it is necessary to develop an edge milling automation system that can satisfy the regulations. In this study, a basic design for an edge milling automation system was developed for standard color plates, and the machining process was established by applying shape recognition and a machining path generation algorithm. In addition, operating software was developed, and suitable milling conditions were derived based on the results of a milling test. The results could be used to build an automation system that meets the PSPC requirements and improve productivity.

• Journal of Advanced Navigation Technology
• /
• v.10 no.1
• /
• pp.13-19
• /
• 2006

In this paper, Gaussian impulse generator for DS-UWB was proposed and fabricated so that the frequency band allocated to WLAN, around 5 GHz, was suppressed in accordance with the regulation of radiation spectrum limitation defined by FCC. In order to transform an unipolar rectangular signal to a Gaussian impulse, the proposed impulse generator consists of two stage impulse generation parts; the first stage using dual SRD and the second stage using gain switching of semiconductor laser diode. The result shows a gaussian impulse as narrow as 180 psec in width. In addition, high order derivative Gaussian filter with a structure of 4 stage ring resonators was designed and fabricated so that DS-UWB impulse generator could reduce the frequency spectrum of WLAN by 25 dB compared to the spectral power of th adjacent UWB band.