• Journal of Korean Ophthalmic Optics Society
• /
• 제20권3호
• /
• pp.369-375
• /
• 2015

Purpose: The current study was performed to estimate the changes in reading speed and blinking rate according to different background colors when reading paper book and further investigate their correlation. Methods: Twenty-nine adults (10 males, 19 females) who consented to the present study and had no ocular disease, ocular surgery history showing normal binocular vision were participated into the study. The subjects were asked to read the novels with black letter printed on white, red, green and blue background for 15 min, respectively. Then, the reading speed per page and blinking rate per page were measured during reading and analyzed according to background colors. Results: Reading speed per page according to the background color showed a tendency to accelerate in the white and green background as the reading time increased however, it was almost unchanged in the blue background and rather decelerated in the red background. On the other hand, the blinking rate per page tended to decrease in all background as the reading time was increased however, the smallest reduction was shown in the red background. There was a correlation that the reading speed increased as the blinking rate decreased in all backgrounds and the best correlation was shown in the green background. Conclusions: From the results, a correlation between the increasing reading speed and the reducing blinking rate while reading paper book with same demand on accommodation and convergence was confirmed however, the change in blinking rate and reading speed was varied depending on the main wavelength of light. It might mean that the working speed and visual fatigue can be varied depending on the difference of main wavelength when doing near work. Thus, it can be suggested that the adjustment of working environment and conditions should be made according to the kind of required perception.

• Proceedings of the Korea Contents Association Conference
• /
• 한국콘텐츠학회 2007년도 추계 종합학술대회 논문집
• /
• pp.209-211
• /
• 2007

The computational time of Stocahstic Diagonalization (SD) calculation for 2-dimensional interacting fermion systems is reduced by using several methods including symmetry operations. First, each lattice is subdivided into spin-up and spin-down lattices separately, thus allowing a bi-partite lattice. A valid basis state is then obtained from stacking up an up-spin configuration on top of a down-spin configuration. As a consequence, the memory space to be used in saving the trial basis state reduces significantly. Secondly, the matrix elements of a Hamiltonianin are reconrded in a look-up table when making basis state set. Thus the repeated calculation of the matrix elements of the Hamiltonian are avoided during SD process. Thirdly, by applying symmetry operations to the basis state set the original basis state is transformed to a new basis state whose elements are the eigenvectors of the symmetry operations. The ground state wavefunction is constructed from the elements of symmetric - bonding state - basis state set. As a result, the total number of basis states involved in SD calculation is reduced upto 50 percentage by using symmetry operations.

• Korean Journal of Optics and Photonics
• /
• 제9권1호
• /
• pp.38-46
• /
• 1998

In this study, the color reproduction algorithm considering both of luminace and chromaticity of the background light is presented and tested to BT-H 1450 monitor(Panasonic). In the case of neglecting the background effect, the Macbeth ColorChecker's 24 colors are reproduced with the average color difference ${\Delta}E_{ab}^{*}$ more than 9.0. By using this method, the average color difference ${\Delta}E_{ab}^{*}$ is decreased less than 1.0. From this study, we can find that both of luminance and chromaticity of background light are very important factors in the color reproduction on a CRT display.

• Journal of the Korea Institute of Building Construction
• /
• 제18권6호
• /
• pp.559-567
• /
• 2018

In the case of fire, surface treatment agents used in external insulation finishing methods are substances that are vulnerable to fire due to thin finishes and the combustion of polymers. In this study, it was expected that the performance of surface preparation mortars could be improved by using expandable graphite with excellent thermal performance. Experimental results showed that the mechanical properties of surface preparation mortar were improved by using the fly ash and silica fume. Surface treatment materials using expanded graphite have a characteristic of expanding when a fire occurs. It has been shown that heat-swellable surface treatment materials can reduce the penetration of heat sources into the surface of synthetic insulation.

• Korean Journal of Food Science and Technology
• /
• 제43권5호
• /
• pp.583-587
• /
• 2011

This study evaluated the quality characteristics of yukwa pellets and yukwa bases on the ratio of soju addition (0, 25, 50, 75, and 100% v/v). Yukwa base with 50% ratio of soju addition displayed the highest diameter, volume and specific volume. The yukwa base with 75% ratio of soju addition displayed the longest in length. The weight of yukwa base increased as the ratio of soju increased. Lightness increased in yukwa pellet and yukwa base as the ratio of soju increased. Lightness of yukwa base was higher than yukwa pellet, but yellowness and redness of yukwa base were lower than yukwa pellet. Air cell size of yukwa base decreased as the ratio of soju increased. The compression and cutting force of yukwa base with 50% ratio of soju addition were lowest, while yukwa base with 0% soju was highest. In the sensory evaluation, preference of color increased as the ratio of soju addition increased. Yukwa base with 50% ratio of soju addition was the highest in internal compactness, mouth-feel, and overall preference. The results show that a soju ratio of 50-75% addition for total liquid is useful in the production of high quality yukwa base.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제32권5D호
• /
• pp.437-444
• /
• 2012

This study intended to improve traffic safety in work zones using fluorescent orange color traffic signs. For this end, the current problems of existing traffic signs and facilities in work zones were analyzed and some good examples of foreign countries were compared. More specifically, in order to identify current problems, the basic shape and color of traffic signs in use were examined through literature review, surveys and field studies. It was found that the fluorescent color worked more effectively than other colors in terms of visibility and conspicuity in work zone sign system. For evaluation, both Conspicuity surveys and in-door simulator experiments were conducted to effectively assess the merits and demerits of different types of traffic signs for work zones. The results of evaluations showed that black lettering on a fluorescent orange background outperformed more than 70% in terms of visibility and ability to call drivers' attention compared with those from black/red lettering on yellow/white backgrounds currently used at work zones on expressways and national highways. In addition, simulated driving experiment disclosed that drivers recognized the fluorescent orange background sign 15m ahead compared with the yellow background sign and 25m ahead compared with the white background sign, respectively. As for the diamond-shaped "Under Construction" sign, drivers recognized fluorescent orange background 11m ahead compared with the yellow background sign and 19m ahead compared with the white background sign, respectively.

• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2021년도 학술발표회
• /
• pp.211-211
• /
• 2021

최근에 기후변화로 인한 한반도에 내습하는 태풍에 빈도는 점차 증가하고 있다. 2020년도 8월 26일 태풍 '바비', 9월 2일 태풍 '마이삭', 9월 7일 태풍 '하이선'은 일주일 내의 간격으로 한반도를 내습하였다. 한반도에 내습한 태풍 중에서 마이삭과 하이선은 동쪽 해역을 지나가면서 강풍과 많은 강우를 초래하였다. 그 결과 특정 원전은 자동 가동중지가 발생되는 사태를 야기 시켰다. 본 연구에서는 원자력 발전소 인근 해역에서 폭풍해일에 의한 가능최대파고 높이를 추정함으로써 발전소 안전성에 대한 검토에 목적을 두고 있다. 이를 위해 첫 번째로 '2019 전국 심해 설계파 산출 보고서'를 바탕으로 원전 인근 해역 심해 설계파 지점에 대해 파고, 주기, 해상풍과 같은 변수들을 분석하였다. 그 결과를 바탕으로 100년부터 1000만년까지의 변수들을 예측하였다. 두 번째로 해도자료를 바탕으로 GIS를 통한 지형자료를 구축하였다. 구축된 지형자료를 바탕으로 SWAN 모델의 기초자료를 구성하였다. 세 번째로 추정된 변수들과 구축된 지형자료를 바탕으로 100년부터 1000만년까지의 시나리오별 SWAN 시뮬레이션을 통해서 원전 인근 해역에 대한 가능 최대 파고 높이를 분석하였다. 그 결과를 바탕으로 특정 원전인근 해역에서의 평균적인 파고 높이에 대한 재해도 곡선을 추정하고 제시하였다. 본 연구를 바탕으로 향후 확률론적인 분석 방법을 적용하여 불확실성을 고려한 재해도 곡선 추정 과정의 기초자료로 활용될 수 있다. 또한 EurOtop을 적용하여 파고 높이에 따른 원전부지의 Overtopping을 추정하고, 최종적으로 폭풍해일에 의한 원전부지의 2차원 침수해석의 기초자료로 활용할 수 있을 것으로 판단된다. 이를 통해 홍수 방지 및 예방과 관련한 홍수저감 활동과 관련된 통제실 외부 시설물에 대한 수동 조작에 대한 안전성 평가가 이루어질 수 있겠다.

• KLA journal
• /
• 제48권9호통권387호
• /
• pp.59-60
• /
• 2007

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제38권12호
• /
• pp.1760-1766
• /
• 2009

Physical properties of Yukwa base extruded with glutinous rice flour, rice flour, defatted soy flour, and salt using an twin-screw extruder were investigated. The ingredients were extruded at various moisture contents (16-18%), screw speeds (300 & 400 rpm) at 43.4 kg/hr feed rate. Length and specific volume of Yukwa base increased with decreasing moisture contents. Hunter's color L* values of Yukwa base was higher whereas $a^*\;and\;b^*$ values were lower with increasing moisture content. Water absorption index of Yukwa base increased with increasing moisture contents. X-ray diffraction of Yukwa base showed B type moisture content of 16% and 17% while it showed A type moisture content of 18%. Degree of crystallinity and breaking strength of Yukwa base were the lowest in the moisture content of 16% while the lowest value for hardness was found in the moisture content of 16% and of 17% with screw speed 400 rpm for all samples. In the microstructure of cross section of Yukwa base, air cell size was larger and cell wall was thicker as moisture content increased. The sensory evaluation of the Yukwa base showed that color and flavor were not significantly different among samples, while taste, appearance, mouth feel, and overall preference were higher as moisture contents decreased.

• Proceedings of the Korean Information Science Society Conference
• /
• 한국정보과학회 2010년도 한국컴퓨터종합학술대회논문집 Vol.37 No.1(C)
• /
• pp.490-495
• /
• 2010

본 연구에서는 효과적인 손 제스처 인식을 위하여 다중 특징을 이용한 견고한 손 추적 방법을 제시한다. 기존의 많은 손추적 장치들이 칼라 정보나 모션 정보와 같은 단일한 정보를 바탕으로 손을 검출하고, 이를 바탕으로 손의 추적하는 방법들을 제시하고 있다. 이러한 방법들의 경우에는 손 추적 중에 환경이나 상황이 변하게 되면, 손추적의 정확도가 현저하게 떨어지게 된다. 본 연구에서는 이러한 문제점들을 보완하기 위하여, Adaboost를 이용한 손 검출, 역투영을 기반으로 손 색상을 이용한 추적, KLT를 바탕으로 한 모션 추적을 이용한 검출을 동시에 수행하며, 각 센서의 추적 결과에 대한 칼만 필터 적용뿐 아니라, 각 센서 정보를 통합하여 견고한 결과를 얻기 위한 방법을 제시한다. 이를 바탕으로 손제스처 인식 시스템을 개발하였으며, 개발된 제스처 인식을 바탕으로 비디오 플레이를 제어하는 시스템을 구현하였다.