• Journal of Ocean Engineering and Technology
• /
• v.25 no.2
• /
• pp.15-20
• /
• 2011

This study aimed at validating the adopted numerical methods to solve two-phase flow around a two-dimensional (2D) rectangular floating structure in regular waves. A structure with a draft equal to one half of its height was hinged at the center of gravity and free to roll with waves that had the same period as the natural roll period of a rectangular barge. In order to simulate the 2D incompressible viscous two-phase flow in a wave tank with the rectangular barge, the present study used the volume of fluid (VOF) method based on the finite volume method with a standard turbulence model. In addition, the sliding mesh technique was used to handle the motion of the rectangular barge induced by the fluid-structure interaction. Consequently, the present results for the flow field and roll motion of the structure had good agreement with those of the relevant previous experiment.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.30-32
• /
• 2015

최근 대형 여객선 및 소형 낚시선 등의 전복사고 사례가 급증하고 있으며 이는 많은 인명사고와 함께 큰 경제적 손실로 이어지고 있다. 이로 인해 선박의 복원 안정성에 관한 관심이 더욱 높아지고 있다. 본 논문에서는 모형선의 복원력을 계측하여 평가 할 수 있는 복원성 시험 도구로서 복원력 계측 장비를 개발하였으며 성능 평가를 함께 실시하였다. 성능평가는 이론적 계산과 시험 결과의 비교분석을 통해 이루어졌고, 이론치와 상용프로그램 및 시험치 결과와의 오차가 각각 0.04%, 3.7%로 양호한 일치를 보여주고 있다. 이와 같이 4%이내의 매우 낮은 오차로 나타남으로서 본 계측 장비의 정밀성과 유용성을 확인할 수 있었다.

• Journal of Navigation and Port Research
• /
• v.38 no.1
• /
• pp.29-37
• /
• 2014

In this paper, the author consider control system design problem of the surface vessel where any types of floating units are included. To keep their motion/position, the Dynamic Positioning System(DPS) is equipped in. Even though sometimes the thrust systems are installed on them, in general the mooring winch system with the rope/wire is used. Therefore, in this paper we consider a single type mooring winch control problem to keep the vessel's position. For this, we introduce an easy and useful control approach which is based on LQ control theory. In this approach, we introduce the frequency dependent weighting matrices which give the system filters to shape frequency characteristics of the controlled system and guarantee the control performance. Based on this, we will show that the proposed approach works well.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.3
• /
• pp.107-114
• /
• 1999

Design Axiom proposed by N. P. Such consists of Independence Axiom & Information Axiom. Based on the Independence Axiom, it is very useful specially for early design stage such as conceptual design to generate the design alternatives by considering both functions and structures of product. Since the Information Axiom shows that the design solution should have a least information to be the best one among the many alternatives, this axiom can be used for the best selection purpose during the preliminary design stage. In this paper, the possibility of Design Axiom in marine design application is checked by carrying out three examples of marine design. In the conceptual design of thruster, it is proven to use the Independence Axiom very effective by relating directly functional requirements with design parameters, one by one. In main engine selection example, Information Axiom is used to select best solution among alternatives by choosing the one having the minimum information quantity. For similarity based design in which the selection of changing design variables and the amount of those are important, it is proved that design axiom applied to Barge design case would be very effective and useful. As functional requirements and constrains were not clarified in early design stage, design axiom shows some difficulty for larger system design like ship which is basically carried out by an incremental and iterative process.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.1
• /
• pp.89-98
• /
• 2017

The offshore plant structure has been transported to the site by barge because it is hard to manufacture in site. When the structure was transported on the sea, offshore plant structures and connection were experienced repetitive submarine load. For this reason, it was known for that the axial force of high-strength bolted connection was declined. Therefore, in this study, high-strength bolted connection was evaluated the shear fatigue performance under longtime fatigue load during marine transport. The experimental variables were selected intial axial force, surface type, and bolt type because they ar important factors in the change of axial force of bolts. As a experimental results of considering various variables, the variation of axial force showed within 1%. Therefore, the high-strength bolted connection was verified structural safety under longtime fatigue load.

• Journal of Navigation and Port Research
• /
• v.33 no.10
• /
• pp.699-702
• /
• 2009

Currently many vessels determine an overhead obstruction by a rule of thumb based on their draft for maritime navigation. Therefore they doesn't have a good overhead obstruction clearance because vertical position of vessels varies on time by tidal. As a result, it is occurred maritime accidents that the mainmast of vessels is bumped against overhead facilities. And disaster by global warming and rising sea levels have increased casualties. So we feel keenly the necessity of warning system for not an earthquake but disaster wave such a tsunami. This paper analyzes a precise GPS ephemeris for maritime precise positioning to solve these problems. The precise GPS ephemeris provided by International GNSS service gives a difficulty to real-time application because of its sample interval. This paper proposes an effective interpolation method for real-time application, and it analyzes an accuracy of precise GPS ephemeris through an interpolation method.

• Therapeutic Science for Rehabilitation
• /
• v.13 no.1
• /
• pp.87-97
• /
• 2024

Objective : This study aimed to acquire activities of daily living (ADL) skills through activity analysis and forward chaining in children with developmental disabilities. Methods : In this study, the performance of children with developmental disabilities was guided stepwise using a changing criterion design. The intervention was conducted in forward chaining after the therapist analyzed the activities of three tasks (shoes, shorts, and short-sleeved T-shirts) set as the Canadian Occupational Performance Measure (COPM). The performance rate at each stage of the three tasks was used as an independent variable, and COPM performance and satisfaction scores before and after the intervention were set as dependent variables. Results : The task performance rates of children wearing shoes, shorts, and short-sleeved T-shirts improved over time. Even at home, the scores for performance and satisfaction of all three tasks increased. Conclusion : Hopefully, activity analysis and behavioral chaining methods will be used not only for ADL but also for various tasks in children with developmental disabilities who have difficulty acquiring tasks.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.4
• /
• pp.385-392
• /
• 2017

This research presents the results of a study on the trajectory characteristics of barges with different configurations. A towing experiment was carried out in a water tank with three types of barges in two cases: with and without skegs. The effects of towline length on trajectory were also observed. This study analyzed and compared the length and amplitude of trajectory shapes for each barge in various combinations. It revealed that the trajectory of a barge is influenced not only by skegs but also by the length of the towline. As a result of this work, it can be clearly seen that skegs significantly improve the course stability of a towed barge regardless of differences in bow shape or towline length. Water tank test results also indicated that the length of a towline plays a key role in affecting the trajectory characteristics of a barge-towing system. The length and amplitude of the slewing motion of a barge increased with an increase in the length of the towline connected to the barge. Validation of the present research results should be carried out by further experiments and computational comparisons in the near future.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.11a
• /
• pp.154-155
• /
• 2011

2010년 천리안위성의 성공적인 발사에 따라 인공위성의 활용에 대한 기대가 커지고 있다. 천리안 해양관측위성(GOCI)이외에 아리랑 2호가 현재 운용중인 우리나라 위성들이다. 가까운 시기에 아리랑 5호(2011년 말), 아리랑 3호(2012년), 아리랑 3A호(2013년)가 발사될 예정이다. 즉, 해양적용을 위한 위성환경은 이제부터 준비되고 있다고 볼 수 있다. 대외적으로 보면, 인공위성 자원은 아주 많다. 문제는 이와 같은 자원을 어떻게 활용할 것인가 인데 이의 활용 기술 개발적 측면에서는 많이 소홀한 것이 사실이다. 전세계적으로 이 시스템 개발을 위한 치열한 경쟁이 진행 중에 있다. 이미 소말리아 주변 감시체계는 많은 부분을 위성에 의지하고 있다. 우리나라에서 최초로 위성활용 가능성을 보여준 사건이 허베이스피리트호 원유유출 사고이다. 이 사고는 2007년 12월7일 아침 7시6분경 서해안 만리포 북서쪽 10km 해상에서 크레인을 적재한 1만1800t급 바지선이 정박 중인 홍콩 선적 유조선 허베이 스피리트호(14만6000t급)와 부딪치면서 발생했다. 이와 같은 기름 유출 사고의 경우, 유출 범위를 정확하게 이해하는 것이 중요하다. 거의 준비된 상태가 아님에도 불구하고 12월 8일 아침 최초로 유출된 기름을 모습을 보여주는 위성이미지(광학위성)가 얻어졌다. 하지만 이와 같은 자료가 관련 전문가가 이용할 수 있기까지 많은 시간이 소용되었고, 이 정보를 전달할 수 있는 방법도 없었다. 사실 단순한 이미지가 아니라 지리정보체계를 가진 오염정보를 제공할 방법도 준비도 되어 있지 못한 상황이었다. 본 발표를 통하여, 허베이스피리트호 사고뿐만 아니라, 2011년 6월부터 수개월간 지속된 발해만 오염사고 적용 등 다양한 사례 소개를 하고, 이를 기반으로 해양경찰청에서 업무활용을 위한 방안을 제시한다. 먼저, 해경청의 주요 임무인, 경비, 수색구조, 오염대응 분야별로 현황 분석을 수행하였다. 또한 국외사례에 대한 조사를 한 후, 최종 인공위성 원격탐사기술의 해경청 도입방안에 대한 설계를 실시하였다. 국제적으로 인공위성을 이용한 해양 경비, 수색구조, 오염 모니터링기술 개발이 이루어지고 있으며, 유럽 국가는 시범도입을 진행 중에 있다. 유럽해사안전국(EMSA)은 해양경비 및 수색구조를 위한 선박통항 및 보고 서비스와 오염대비대응(Pollution Preparedness and Response, PPR) 위성 서비스를 회원국에 제공하고 있다. 해양경찰청 임무 수행뿐만 아니라, 해양영토 관리적 측면에서 첨단 위성장비 활용, 선진국형 해상경비 패러다임의 전환 필요성이 크다고 할 수 있다.

• Explosives and Blasting
• /
• v.22 no.3
• /
• pp.57-64
• /
• 2004

There are two major types of underwater blasting at Korea, bridges and harbor construction work. Pier blasting for lay the foundation bridges construction is used dry excavation working (drilling and charging) after pump out water and then fire pump in water that is same as bench blasting. In contrast, underwater blasting for harbor construction and increase of harbor load depth is used to barge with digging equipment that is in oder to drilling on the surface and blasting work(charge, hook-up) under water. Thus, there are need to special concern such as charge method and hook-up method different from tunnel blasting work and bench blasting work. If do not use special concern breaks out dead pressure and mis fire because of there are so many difficult condition such as water pressure, obstruct field of vision. In this study underwater blasting at Busan Harbor Construction have consider with special concern that is plastic pipe charge method used to MegaMITE I and specialized buoy hook- up method make far initial system detonate on the surface used to TLD. The results is designed blast pattern charge per delay effect an inspection of verify between predict velocity and measure velocity. minimized break out mis fire consideration charge method, hook up method. According to result best underwater blasting design is 105mm drilling dia, MeGAMITE II, HiNLL Plus(non electric detonator).