• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.05a
• /
• pp.159-164
• /
• 1999

PTC (Positive Temperature Coefficient of Resistivity) 소자는 티탄산 바륨 (barium titanate) 계열의 페로브스카이트 (perovskite) 구조를 가지는 물질을 반도체화시켰을 때 큐리온도 부근에서 저항이 1,000배 이상 증가하는 물질을 가리킨다. 처음에는 BaTiO$_3$를 대상으로 12$0^{\circ}C$ 부근에서 발생하는 PTC 현상을 연구하였으나, BaTiO$_3$에 SrTiO$_3$, PbTiO$_3$를 첨가하면, 큐리온도를 낮출 수도 있고, 높일 수도 있어서 PTC 소자의 사용 영역이 넓어졌다. PTC 소자의 응용분야는 1) 천연색 텔레비젼 수상기와 모니터에 사용하는 degausser와 같은 스위칭 소자, 2) 냉장고용 컴프레서등에 사용되는 모터 기동용 소자, 3) 자동차 연료조기증발용 히타와 같은 세라믹 히타 소자로 크게 구분된다.(중략)

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.5-6
• /
• 2007

반투명 전도성 음극 (semi-transparent conducting cathode)인 Ba (x nm)/Au (20 nm)/ITO (100 nm)을 이용하여 전면발광 유기전계 발광 소자 (top-emitting organic light-emitting didodes, TEOLEDs)를 제작했다. Ba과 bis(8-quinolinolato)aluminum (III) ($Alq_3$) 계면의 전자구조는 엑스선 광전자 분광법 (X-ray photoelectron spectroscopy, XPS), 자외선 광전자 분광법 (ultraviolet photoelectron spectroscopy, UPS) 및 가까운 끝머리 엑스선 흡수 미세구조 (near-edge x-ray absorption fine structure, NEXAFS) 스펙트럼의 광 방출 특성을 통하여 조사되었다. $Alq_3$/Ba 계면 특성에 있어서 XPS와 NEXAFS 특성에 의하면, $Alq_3$ (10.0 nm) 위에 Ba이 연속적으로 증착됨에 따라 Ba으로부터 $Alq_3$로의 전자전달 (electron charge transfer) 특성은 꾸준희 증가된다. 그러나 Ba의 두께가 1.0 nm 이상 초과되면 Ba의 전자전달에 기인한 반응성때문에 $Alq_3$의 분자구조가 해리된다. 한편, 제작된 TEOLEDE의 전류-전압-휘도 곡선의 경우에서도 바륨의 증착 두께가 1.0 nm일 때 가장 우수한 구동특성을 나타냈다.

• Analytical Science and Technology
• /
• v.19 no.4
• /
• pp.280-284
• /
• 2006

The objective of this study is to investigate the removal of heavy metal by using the coprecipitation of barium sulfate. Several parameters governing the efficiency of the coprecipitation method were evaluated by the pH of sample solution, amount of coprecipitant, and addition of sulfide for the removal of As(V), Cd(II), Cr(III), Cr(VI), Cu(II), Hg(II) and Pb(II) metal ions ($10{\mu}g/ml$ each). The coprecipitation was about 80% - 95% only for lead at low pH but under 10% for other ions. The amount of removal was about 95% - 100% for Cd, Hg, Pb, Cu in the all pH range by the addition of sulfide with barium sulfate but As(V) and Cr(III, VI) ions were not affected by the same conditions.

• Conservation Science in Museum
• /
• v.30
• /
• pp.23-46
• /
• 2023

The Jija Chongtong Gun, owned by Seokdang Museum of Dong-A University, is a tubedstyle heavy weapon of the battlefield in the mid-Joseon Dynasty and is the second largest firearm after Cheonja Chongtong. The original surface color of the Jija Chongtong Gun was obscured by foreign substances and therefore it was judged that its condition requires the conservation treatment. For stable conservation treatment, gamma ray and X-ray non-destructive transmission surveys was conducted to determine the internal structure and conservation condition. And the component analysis on the material components and surface contaminants of Jija Chongtong Gun was conducted by utilizing the p-XRF component analysis, SEM-EDS component analysis, and XRD analysis. As a result of the gamma-ray and X-ray non-destructive transmission investigation, a large amount of air bubbles was observed inside Jija Chongtong Gun, and the part that appeared to be a chaplet by visual observation was not identified. As a result of gamma-ray and p-XRF component analysis, it was confirmed that Jija Chongtong Gun was bronze made of copper (Cu), tin (Sn), and lead (Pb) alloy. As a result of surface analysis of foreign substances using SEM-EDS, it was confirmed that the main components of white foreign substances were calcium (Ca), sulfur (S), and titanium (Ti). Titanium was presumed to be titanium dioxide (TiO₂), the main component of white correction fluid. The red foreign substance was confirmed to contain barium (Ba) as its main ingredient, and was presumed to be barium sulfate (BaSO₄), an extender pigment in paint. White and red contaminants, mainly composed of titanium and barium, are presumed to have been deposited on the surface in recent years. The yellow foreign substances were confirmed to be aluminum (Al) and silicon (Si), and were presumed to have originated from soil components. As a result of SEM-EDS and XRD component analysis, the white foreign substance was confirmed to be gypsum (CaS). Based on the results of component analysis, surface impurities were removed, stabilization treatment, and strengthening treatment were performed. During the conservation process, unknown inscriptions Woo (右), Byeong (兵), Sang (上), and Yi (二) were discovered through a portable microscope and precise 3D scanning. In addition, the carving method, depth, and width of the inscription were measured. Woo Byeong Sang is located above Happo Fortress in Changwon, and Yi can be identified as the second hill.

• Journal of radiological science and technology
• /
• v.26 no.1
• /
• pp.39-44
• /
• 2003

The aim of this study is to evaluate a efficient w/v% barium suspension and w/v% sodium carboxy methyl cellulose (SCMC) for small bowel examination. Between november 2001 and june 2002, 370 patients were examined small bowel examination with oral administration of barium suspension mixed with SCMC. we classified into six groups including A(fine type 40% $BaSO_4$ mixed 0.5% SCMC and 600 ml 0.5% SCMC administration), B(fine type 30% $BaSO_4$ mixed 0.5% SCMC), C(fine type 20% $BaSO_4$ mixed 0.5% SCMC), D(fine type 25% $BaSO_4$ mixed 0.5% SCMC), E(D mixed coarse type 25% $BaSO_4$ mixed 0.5% SCMC), F(D mixed coarse type 25% $BaSO_4$ mixed 0.75% SCMC). We measured transparency rate of contrast media transit time, administration dose, viscosity and particle size. The transparency rate was higher then 80 kV and 90 kV in 100 kV in the same 20 mAs condition. Transit time was the fastest in A group(mean trans time 56 minutes) and the slowest in E group(mean 100 minutes), Administration dose was the smallest in A group(mean dose 541 ml and the most in E group(mean 1,100 ml), viscosity was the lowest in E(125.1 mpa/s) and the highest in A(375.5 mpa/s), and particle size was $1.0\;{\mu}m$ in A, B, C, and D group, $0.6\;{\mu}m,\;1.0\;{\mu}m,\;10.0\;{\mu}m$ in E, F group. In conclusion, we propose that the efficient condition for small examination is high voltage technique, high density $BaSO_4$, and 0.625% w/v SCMC.

• Journal of the Korean Society of Radiology
• /
• v.12 no.4
• /
• pp.467-474
• /
• 2018

CBCT is useful for improving the accuracy of the treatment site, but Repeated use increases the exposure dose. In this study, we aimed to provide basic data for dose reduction in CBCT implementation by dataization the simulating and dose reduction effect using shielding substance. Material in this study, Analyzation the photon beam by simulate the CBCT Through MCNPX and then calculate the absorption dose of body organ at shooting moment of thoracic abdominal position as target UF-Revise simulated body. At this time. Dose reduction effects at this time were evaluated according to the texture of materials and presence of shielding materials( lead, antimony, barium, sulfate, tungsten, bismuth). When CBCT was taken without shielding, the dose was calculated to be high in the breast and spine, and the dose in the esophagus and lung was calculated to be low. The doses according to the shield material were calculated as barium sulfate, antimony, bismuth, lead, and tungsten. The shielding rate was the highest in the thymus (73.6%) and the breast (59.9%) compared with the dose reduction according to presence or absence of the shield. However, it showed the lowest shielding rate in lung (2.1%) and spine (12.6%).

• Korean Chemical Engineering Research
• /
• v.43 no.4
• /
• pp.517-524
• /
• 2005

Barium titanate ($BaTiO_3$) particles were prepared by spray pyrolysis from spray solution containing organic additives. The effects of the type and amount of organic precursors on the crystal structure and morphology of the $BaTiO_3$ particles were investigated. It was found that the morphology of $BaTiO_3$ particles before and after calcination depended on the type of organic additives such as citric acid, ethylene glycol and polyethylene glycol. Among these organic additives, citric acid was the most effective to prepare $BaTiO_3$ particles with nano-structured morphology consisting with uniform size nanometer particles after calcination. It was also found that the phase transformability of the metastable cubic phase to the tetragonal one during calcination could be improved by increasing the content of citric acid in the spray solution. As a result, $BaTiO_3$ particles prepared from spray solution containing high concentration of citric acid had good tetragonality, uniform and fine size, and high BET surface area after calcination. $BaTiO_3$ particles prepared by spray pyrolysis had nanometer size and uniform morphology after simple ball milling process.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.9
• /
• pp.931-935
• /
• 2012

In this study, we fabricate and investigate low-temperature solid oxide fuel cells with a ceramic substrate/porous metal/ceramic/porous metal structure. To realize low-temperature operation in solid oxide fuel cells, the membrane should be fabricated to have a thickness of the order of a few hundreds nanometers to minimize IR loss. Yttrium-doped barium zirconate (BYZ), a proton conductor, was used as the electrolyte. We deposited a 350-nm-thick Pt (anode) layer on a porous substrate by sputter deposition. We also deposited a 1-${\mu}m$-thick BYZ layer on the Pt anode using pulsed laser deposition (PLD). Finally, we deposited a 200-nm-thick Pt (cathode) layer on the BYZ electrolyte by sputter deposition. The open circuit voltage (OCV) is 0.806 V, and the maximum power density is 11.9 mW/$cm^2$ at $350^{\circ}C$. Even though a fully dense electrolyte is deposited via PLD, a cross-sectional transmission electron microscopy (TEM) image reveals many voids and defects.

• Journal of the Korean Society of Radiology
• /
• v.1 no.2
• /
• pp.5-11
• /
• 2007

Intussusception is one of the most common cause of bowel obstruction in infant under the two years old, especially in male. Clinical analysis was enrolled on 54 intussusception cases who were diagnosed by ultrasound and treated by non-operative reduction at the Presbyterian Medical Center from June 2005 to May 2007. The results were as follow. 1) There was the most common(40.7%)between thirteen and twenty four months on the distribution of age. Male(72.2%) and female(27.8%) were in the ratio of 2.6:1 on the distribution of gender 2) The frequent symptoms were abdominal pain with grizzle(100.0%), vomiting(66.7%) and diarrhea(33.3%). There was a significant difference among them(p<0.05). There was the most common(46.3%) between 10,000/$mm^3$ and 15,000/$mm^3$ in the result of WBC. 3) 42.6% of patient at a private hospital performed primary care. The treatment after initiating the symptom of intussusception was performed between 6 hrs and 12hrs (37.0%). 4) The most common type and portion of intussusception were ileo-colon(98.1%) and hepatic flexure (68.5%). 5) 88.0% at air reduction and 86.2% at barium reduction were successful. The reduction rate were similar to both techniques. There was no significant difference between them(p>0.05).

• Progress in Medical Physics
• /
• v.17 no.2
• /
• pp.96-104
• /
• 2006

Experiments from several groups Including ours have demonstrated that $Ca^{2+}$ can enhance the inactivation of N-type calcium channels. However, it is not clear if this effect can be ascribed to a 'classic' $Ca^{2+}$-dependent inactivation (CDI) mechanism. One method that has been used to demonstrate CDI of L-type calcium channels is to alter the intracellular and extracellular concentration of $Ca^{2+}$. In this paper we replaced the external divalent cation to monovalent ion ($MA^+$) to test CDI. In the previous paper, we could separate fast (${\tau}{\sim}150ms$) and slow (${\tau}{\sim}2,500ms$) components of inactivation in both $Ba^{2+}$ and $Ca^{2+}$ using 5-sec voltage step. Lowering the external divalent cation concentration to zero abolished fast inactivation with relatively little effect on slow inactivation. Slow inactivation ${\tau}$ correspond very well with provided the $MA^+$ data is shifted 10 mV hyperpolarized and slow inactivation ${\tau}$ decreases with depolarization voltage in both $MA^+\;and\;Ba^{2+}$, which consistent with a classical voltage dependent inactivation (VDI) mechanism. These results combined with those of our previous paper lead us to hypothesize that external divalent cations are required to produce fast N-channel inactivation and this divalent cation-dependent inactivation is a different mechanism from classic CDI or VDI.