• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.2
• /
• pp.16-29
• /
• 2013

The purpose of this study is to evaluate air ventilation using wind patterns of MetPhoMod program at nighttime focused on Changwon-si, Gyeongsangnam-do. Evaluation indices of air ventilation are wind resistant and retention used by results of each wind speed and diversity. The results are as follows. Vulnerable areas of air ventilation are Bonglim-dong, Bansong-dong, Yongji-dong and so on. In high-rise apartment, commercial area and single residential area of Yongji-dong, Sangnam-dong and Sapa-dong, wind is stagnated by high buildings. Therefore, these areas should construct urban spaces to circulate the wind. And to inflow persistingly the fresh wind generated in a rural area, we think that the construction of wind corridor is suggested by development plan and policy wind corridor.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1996.10a
• /
• pp.80-83
• /
• 1996

연안해역에서의 흐름은 조석에 의한 주기적인 해수면의 승강작용에 의한 조류, 바람에 의해 발생되는 수면 마찰력에 의한 풍성류(wind-driven flow), 밀도가 다른 하천수 등의 유입에 의한 밀도류 등에 의하여 발생한다. 대부분의 자연수괴에서의 실제 흐름은 이러한 흐름들이 단독으로 발생하는 것이 아니라 동시에 발생하는 복합류(combined flow)이다 따라서, 연안해역에서의 오염물질의 이동ㆍ확산은 이러한 복합류에 의하여 발생하므로 복합류의 구조에 대한 정확한 이해, 평가 및 예측은 연안수의 순환 및 오염물질의 확산에 관한 자연현상을 정확히 이해하는데 있어서 반드시 필요하다. (중략)

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1996.10a
• /
• pp.38-41
• /
• 1996

심해에서 풍파의 형성은 주로 바람에 의한 마찰력과 파와 파간의 상호간섭 그리고 white capping 현상등에 의한 1차 에너지 손실에 의하여 이루어지며, 파의 변이는 주로 이상의 세 가지 물리현상에 좌우된다. 이러한 심해역에서의 파의 변이를 해석할 때 굴절, 회절 및 마찰손실 등에 의한 천해역 현상은 무시할 수 있으며 풍파의 형성은 주로 바람 조건에 좌우된다. 그러나 파도가 일단 심해역에서 천해역으로 들어오게 되면, 천수, 굴절, 회절 및 마찰손실 등에 의하여 급격하게 변이한다. (중략)

• Water for future
• /
• v.29 no.6
• /
• pp.141-154
• /
• 1996

A computer program is developed in order to investigate the fluid flow and heat ransfer of a water body in a 2-D vertical rectangular coordinate. The specific purpose of this study is to obtain a physical insight of several fluid flow problems which occur in a lake and the water and wastewater treatment facility like a primary clarifier. The performance of computer program developed is successfully evaluated by the comparison of other two experimental and computational data in open literature : the first comparison is made against the numerical data associated with the cooling water discharge and the other is numerical and experimental works for the primary clarifier of Sarina City at Ontario. Further, the computer program is applied to investigate the feature of lake flow, say lake turnover, and 2-D vertical channel flow in terms of temperature, wind velocity and flow rate, etc. The computational results appear to be physically acceptable and consistent. The computer program developed in this study shows the possibility of the viable tool to figure out the flow characteristics of water reservoir.

• Smart Media Journal
• /
• v.8 no.4
• /
• pp.38-45
• /
• 2019

When there is a spray flow such as from a pesticide nozzle, winds affect the droplet flow of a rotary-wing drone accompanied by a strong wake, with a severe oscillation. Especially, during forwarding flights or when winds come from the side, compare to a simple hovering flight as the droplet is in the effect of aerodynamic drag force, the effect of spraying region becomes even larger. For this reason, the spraying of pesticides using drones may cause a greater risk of scattering or a difference in droplet dispersion between locations, resulting in a decrease in efficiency. Therefore, through proper numerical modeling and its applied simulation, an indication tool is required applicable for the various flight and atmospheric conditions. In this research, we completed both experiment and numerical analysis for the strong downwash from the rotor and flight velocity of the drone by comparing the probability density function of droplet distribution to build a spraying system that can improve the efficiency when spraying droplets in the pesticide spray drone.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.3 no.2
• /
• pp.11-17
• /
• 2000

The drift and movement of oil slick in the sea are closely related to the flows at the sea surface (at 0m depth) because specific gravity of an oil is lighter than that of sea water. As an effort toward a development of realistic model for oil spill drift on the sea surface, a study on sea surface wind-induced drift (skin drift) at 4 coastal regions of Korea was carried out. In this study, skin drifts were inferred from difference between the flow at the sea surface and that in underwater (at 1.5m depth). The average speed of skin drift in our experiments was 2.9% of wind speeds and the average direction of skin drift to wind was deflected to the right by 18.6°. The results of this experiment were used in the modelling of the skin drift as a prompt response of time-variable wind. The modelled skin drift, which corresponds to observed wind, successfully reproduced the observed trajectories of sea surface flows.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.11a
• /
• pp.247-252
• /
• 1998

폐기물의 처리방법으로는 매립, 소각, 재활용 등이 있으며, 이 중 자원으로 재활용하는 방법이 가장 바람직하다. 그러나 모든 폐기물을 자원으로 재활용 할 수 없을 뿐 아니라, 사업장에서 발생되는 폐기물 특히 병원폐기물의 경우 재활용이 거의 불가능하고, 위생적 처리가 어려우므로 소각에 의하여 위생적이고, 안전하게 처리하는 방안이 가장 적합하다. 소각방식은 처리대상 폐기물의 종류와 처리량 등에 따라서 화격자식, 유동상식, 로터리킬른식, 분무식소각로식 등으로 분류된다. (중략)

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.1
• /
• pp.1-14
• /
• 2023

High-Frequency Radar (HF-Radar) data of surface currents in Yeongil Bay (a semi-enclosed sea area of the East Sea) was used to investigate the between wind and horizontal surface currents The variation in horizontal and vertical flow of surface currents correlated closely to the water temperature time-series data of densely spaced (1 to 2 m) layers. During the time-series observation period, when the northeast wind prevailed over the entire Yeongil Bay area, a rapid rise in water temperature was recorded across all the layers. Moreover, currents parallel to the wind direction were clearly observed in low-frequency currents of the surface layer. Time-delayed correlation analysis between wind and surface current confirmed that if northeasterly wind blows in Yeongil Bay and continues unidirectionally, a southwestward surface current occured within a short period of time (1 to 2 hours). Convergence and divergence were calculated from the daily average values of low-frequency surface currents. A rapid rise in temperature occurred in the lower layers of water at the observation points, due to the convergence (downwelling) of the surface seawater (relatively high temperature water) associated with the northeasterly wind.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.2
• /
• pp.28-41
• /
• 2023

The objective of the study was to develop an Urban Windway Forest Creation Planning Technique for the Improvement of the Urban Environment using the case of Daejeon Metropolitan City. Through a spatial analysis of fine dust and heat waves, a basin zone, in which the concentration was relatively serious, was derived, and an area with the potential of cold air flow was selected as the target area for the windway forest development by analyzing the climate and winds in the relevant zone. Extreme fine dust areas included the areas of the Daejeon Industrial Complex Regeneration Business District in Daedeok-gu and Daedeok Techno Valley in Yuseong-gu. Heat wave areas included the areas of Daedeok industrial Complex in Moksang-dong, the Daejeon Industrial Complex Regeneration Business District in Daehwa-dong, and the high-density residential area in Ojeong-dong. As a result of measuring the wind speeds in Daejeon with an Automatic Weather System, the average wind speeds during the day and night were 0.1 to 1.7 m/s,, respectively. So, a plan of for a windway forest that smoothly induces the movement of cold air formed in outer forests at night is required. The fine dust/heat wave intensive management zones of Daejeon Metropolitan City were Daejeoncheon, Yudeungcheon, Gapcheon-Yudeungcheon, and Gapcheon. The windway forest formation plan case involved the old city center of Daejeon Metropolitan City among the four zones, the Gapcheon-Yudeungcheon area, in which the windway formation effect was presumed to be high. The Gapcheon-Yudeungcheon area is a downtown area that benefits from the cold and fresh air generated on Mt. Gyejok and Mt. Wuseong, which are outer forests. Accordingly, the windway forest was planned to spread the cold air to the city center by connecting the cold air generated in the Seosa-myeon forest of Mt. Gyejok and the Namsa-myeon forest of Mt. Wuseong through Gapcheon, Yudeungcheon, and street forests. After selecting the target area for the wind ventilation forest, a climate map and wind formation function evaluation map were prepared for the area, the status of variation wind profiles (night), the status of fine dust generation, and the surface temperature distribution status were grasped in detail. The wind ventilation forest planning concept and detailed target sites by type were identified through this. In addition, a detailed action plan was established according to the direction of creation and setting of the direction of creation for each type of wind ventilation forest.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.1
• /
• pp.78-87
• /
• 1998

In many industrial practices it is an important problem to discharge a high-pressure exhaust gas to the atmosphere without generating a loud noise and much vibration. This may be achieved by confining a shock system inside the exhaust duct with a double orifice. The objective of the current work is to develop a new treatment method for the high-pressure exhaust gases. A theoretical analysis was applied to one-dimensional, steady. viscous, compressible model flowfield, and an experiment was performed using a shock tunnel facility. The results showed that the total pressure drop increases with a decrease of the opening area of the upstream orifice, and the shock confinement to the duct is possible by decreasing the opening area of the downstream orifice.