• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.4
• /
• pp.165-173
• /
• 2005

Field observations have been conducted to investigate the physical environment around oyster farms in Gamak Bay. Tidal waves near the two channels at the northeast and south of the bay had almost the same amplitudes and phases. Water temperature responded sensibly to the tides, rising at high water and falling at low water, except for the northwest region. The currents more regularly varied in accordance with a tidal period as long as they are at the faster-flowing region. A considerable flow has been found near the seabed of the northwest of the bay, normally known to be a stagnant area, and also the flow was opposite to the surface flow. Average moving speeds and directions of the flow at each station coincided well with patterns of the residual currents computed by Lee ef al. [2004], except for the northwest region. The discrepancy for the northwest region is not clear but it may have resulted from the facts that the computed flow pattern represents only the case of spring tide and in addition, a northwesterly wind prevailed all the observation time.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.1
• /
• pp.79-90
• /
• 2009

This paper presents the development of dynamically combined Typhoon generated surge-tide-wave numerical model which is applicable from deep to shallow water. The dynamically coupled model consists of hydrodynamic module and wind wave module. The hydrodynamic module is modified from POM and wind wave module is modified from WAM to be applicable from deep to shallow water. Hydrodynamic module computes tidal currents, sea surface elevations and storm surges and provide these information to wind wave module. Wind wave mudule computes wind waves and provides computed information such as radiation stress, sea surface roughness and shear stress due to winds. The newly developed model was applied to compute the surge, tide and wave fields by typhoon Maemi. Verification of model performance was made by comparison of measured waves and tide data with simulated results.

• Journal of Energy Engineering
• /
• v.12 no.1
• /
• pp.11-16
• /
• 2003

A numerical study was performed on the transient fuel temperatures of a military aircraft stationed under non-operating static condition. Numerical calculation was peformed by an explicit method using modified Dufort-Frankel scheme. It was assumed that the non-operating aircraft is subjected to repeated daily cycles of air temperature with the solar radiation and wind speed corresponding to the 1 % hot day ambient condition. And, the aircraft was assumed to be in turbulent flow. The convective heat transfer coefficient for turbulent flow on the flat plate suggested by Eckert was employed to calculate heat transfer between the aircraft surface and the ambience. The energy conservation equation on fuel was used as governing equation for this analysis. As a result of this analysis, the wing tank temperature showed the highest temperature and the largest rate of temperature changes among fuel tanks. The results of this analysis could be used as initial foe] temperatures for analysis of the transient fuel temperatures in various flight missions. Also, this analysis method could be used to analysis and design of an aircraft thermal energy management system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3533-3539
• /
• 2009

An air conditioner impeller has been used to suck the warm air and to blow the chilled air by the centrifugal force induced from the rotation of it. To check the possibility of the fracture due to resonance, both numerical and experimental approach was carried out. For the structural analysis, the commercial code ANSYS based on the Finite Element Method was employed. The possibility of the fracture is the resonance between the natural frequency of impeller and characteristic frequency due to the aerodynamic forces. Experiment was carried out to see the natural frequency and numerical analysis based on the Vortex Element Method is performed to get the characteristic frequency. Comparing the natural frequencies that are calculated as described, we believe that resonance occurs.

• Journal of the Korean Society of Groundwater Environment
• /
• v.2 no.2
• /
• pp.49-57
• /
• 1995

Areas of Chungyang in Chungcheongnamdo, Cheju island and Georgia in U.S.A. were selected to calculate their groundwater ages and dispersion parameters using tritium. Piston flow model, Completely mixing model and Dispersion binomial model which calculate men residence times, and Dispersion normal model and Dispersion model(C$\_$FF) which calculate mean residence times and dispersion parameters simultaneously were applied. Since the input data, tritium concentrations of rainwaters, lack in part, tritium input function was prepared using the correlation of tritium concentrations of rainwaters of Pohang, Korea and Ottawa, Canada. Similar results of PFM and DBM reflect the intrinsical similarity of two models, assumption of low dispersion. The ages of sites of showing relatively higher tritium concentrations than other sites in the sam, region were not calculated by CMM. Since the calculations of DNM and DM(C$\_$FF/) provide the combination of wide ranges of parameters and groundwater ages, the ranges of dispersion parameters were narrowed down under the assumption that ages calculated by PFM and DBM are correct. Since large variation of tritium concentrations of outflows in a same region may reflect the different characteristics of each groundwater flow regime, using only one specific model on a whole region is not recommended.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1378-1383
• /
• 2008

댐 저수지에서 지속적인 탁도를 유발하는 물질은 쉽게 침강되지 않는 $20{\mu}m$이하의 작은 부유물질(SS)이며, 가을 수직혼합 시기까지 침강되지 않은 부유물질은 다시 재부상하는 경우도 발생한다. 저수지내 탁수의 장기 체류는 수자원 이용과 하류하천의 수생태계에 다양한 문제를 야기하고 있어 일부 댐에서는 실시간 탁도 감시 장치를 설치하고 취수설비를 개선하는 등의 탁수저감 대책의 노력을 기울이고 있으나, 시설의 최적 운영을 지원할 수 있는 탁수 거동 및 탁도 예측에 관한 연구는 아직 부족한 실정이다. 특히, 탁도는 물 속에 존재하는 부유물질의 광학적 특성(light attenuation)을 나타내는 지표로써 SS와는 물리적인 물성이 달라 실시간 계측자료(탁도)와 모델의 모의 변수(SS)가 다른 문제점 때문에 모델링에 어려움이 있었다. 지금까지 탁도 모델링은 대부분 탁도와 SS의 상관관계를 이용하는 방법을 사용하였다. 그러나 이 방법은 탁도-SS 관계가 실측지점과 입자크기분포에 따라 달라지는 특성 때문에 변환과정에 예측결과의 불확실성이 내재한다는 지적을 받아왔다. 본 연구의 목적은 저수지로 유입한 탁수의 보다 과학적이고 정확한 탁도 예측을 위해 탁도를 유발하는 부유물질의 입자크기 분포와 공간적으로 변하는 탁도-SS의 상관관계를 고려할 수 있는 표준화된 탁도 모델링 방법을 개발하고, 실측자료를 사용하여 제시된 탁도 모델링 방법의 예측 성능을 평가하는데 있다. 부유물질의 이송-확산-침강 모델은 2차원 횡방향 평균 수리 모델과 연결(coupling)되어 수행되며, 저수지 수면을 통한 열 교환, 바람과 바닥 조도에 의한 난류혼합과 성층해석, 하천 유입수의 저수지내 밀도류 유동, 그리고 입자 크기별 부유물질의 독립침강을 해석한다. 부유입자의 크기분포와 공간적으로 서로 다른 탁도-SS 관계를 고려한 탁도 예측모델은 기존의 탁도를 종속변수로 사용한 예측 방법 또는 단일 입자크기를 사용한 모델보다 개선된 모의결과를 보여주었다. 본 연구에서 제시된 탁도 예측 알고리즘은 실시간 탁수감시와 예측 모델링, 그리고 댐 방류수 탁도 관리를 위한 선택취수 설비의 운영을 위한 의사결정지원시스템에 적용 가능할 것으로 사료된다.

• Journal of the Korean Solar Energy Society
• /
• v.37 no.6
• /
• pp.25-37
• /
• 2017

A study on factors influencing measurement error of Ground-based LiDAR(Light Detection And Ranging) system was conducted in Kimnyeong wind turbine test site on Jeju Island. Three properties of wind including inclined angle, turbulence intensity and power law exponent were taken into account as factors influencing the measurement error of Ground-based LiDAR. In order to calculate LiDAR measurements error, 2.5-month wind speed data collected from LiDAR (WindCube v2) were compared with concurrent data from the anemometer on a nearby 120m-high meteorological mast. In addition, data filtering was performed and its filtering criteria was based on the findings at previous researches. As a result, at 100m above ground level, absolute LiDAR error rate with absolute inclined angle showed 4.58~13.40% and 0.77 of the coefficients of determination, $R^2$. That with turbulence intensity showed 3.58~23.94% and 0.93 of $R^2$ while that with power law exponent showed 4.71~9.53% and 0.41 of $R^2$. Therefore, it was confirmed that the LiDAR measurement error was highly affected by inclined angle and turbulence intensity, while that did not much depend on power law exponent.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.84-84
• /
• 2011

저수지에서 수체의 거동정보는 저수지관리를 위해 매우 중요하며, 이를 수리 및 수질모형에 적용하여 다양한 예측에 활용할 수 있는 기본적인 정보이다. 그러나 저수지 수체의 흐름은 매우 느리고 조사시기에 따라 혹은 수심에 따라 영향을 받으며, 바람 등 외부요인에도 영향을 받게 됨으로 정확한 측정에 많은 어려운 문제가 있다. 따라서 보다 정확한 측정을 위해서는 최신의 기술이 적용되어야 한다. 현장조사에 적용한 저수지 수체거동조사장비(drifter)는 수체의 유동을 관측하는 장치로 GPS 및 Drogue를 장착한 장치가 저수지 수체의 흐름에 따라 이동하면서 위치정보를 무선통신으로 실시간 전송할 수 있도록 만들어진 장치이다. 수체흐름 측정장치는 크게 수체거동정보 생산부이 시스템과 수집서버 및 데이터베이스 서버로 구성되어 있다. 현장 조사시에는 부이에 장착되어 있는 GPS를 통해 현재의 위치가 매번 정해진 시간 간격마다 본체 내부의 메모리에 저장되며, 측정자가 설정한 시간간격으로 위치정보를 수신국으로 전송하도록 구성되어 있다. 수체이동부이의 데이터 수신은 CDMA를 통해 송신된 메일 데이터를 자체적으로 수집하여 데이터형태로 변환한 뒤 실시간으로 표출하고 저장되며, 최대 10개의 부이를 동시에 추적 및 모니터링할 수 있게 구성되어 있다. 본 연구는 용담댐저수지에서 평갈수기 및 풍수기로 구분하여 수체거동을 조사하였다. 평갈수기 조사는 2010년 4월부터 6월까지 총 3차례에 걸쳐 실시하였으며, 풍수기 조사는 8월에 3차례에 걸쳐 실시하였다. 수집된 자료에 의하면 평갈수기 drifter의 평균 속도는 2.25 cm/sec, 최고 속도는 3.46 cm/sec, 최저 속도는 1.15 cm/sec로 나타났으며, 풍수기 조사에서는 평균 속도 2.0 cm/sec, 최고 속도는 2.5 cm/sec, 최저 속도는 1.29 cm/sec로 조사되어 평갈수기와 풍수기간 저수지 수체의 이동속도는 유사한 것으로 평가되었다. 그러나 수기별 조사는 보다 더 많은 정보가 필요하며, 수심에 따른 차이도 있을 것으로 판단되어 좀더 다양한 조사가 수행되어야 보다 정확한 결과를 도출할수 있을 것으로 판단된다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.77-88
• /
• 2000

This paper presents an approach for rate control by adaptively selecting macroblock modes in video coding.The problem of rate control has been investigated by many authors where quantizer level is adjustedbased on the buffer fullness. The proposed approach is different fron the previous ones [4] id that it finds the optimal decision curve rather than finding a set of the modes. Proposed algorithm extends the coding decision options for rate control to motion/no-motion compensation as well as inter/intra decisions. Instead of having a fixed motion/no-notion compensation or inter/intra decision curve, one can utilize an adaptive decision curvebased on the characteristics of input frames so that the PSNR at a given bit rate is maximized. Therefore, the proposed approach provides better rate control than simple quantizer feedback approach interns of visual quality. The curve is obtained by utilizing simulated annealing optimization technique. Thealgorithm is implemented and simulations are compared with other approaches within H.261 video codec.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12A
• /
• pp.1171-1180
• /
• 2010

In wireless sensor networks, reliable event detection is one of the most important research issues. For the reliable event detection, previous works usually assume the events are only individual objects such as tanks and soldiers. Recently, many researches focus on detection of continuous objects such as wild fire and bio-chemical material, but they merely aim at methods to reduce communication costs. Hence, we propose a reliable continuous object detection scheme. However, it might not be trivial. Unlike individual objects that could be referred as a point, a continuous object is shown in a dynamic two-dimensional diagram since it may cover a wide area and it could dynamically alter its own shape according to physical environments, e.g. geographical conditions, wind, and so on. Hence, the continuous object detection reliability can not be estimated by the indicator for individual objects. This paper newly defines the reliability indicator for continuous object detection and proposes an error recovery mechanism relying on the estimation result from the new indicator.