• Journal of Conservation Science
• /
• v.30 no.2
• /
• pp.169-179
• /
• 2014

After occurrence of Cyanobacteria in 1997, Songsan-ri tombs located in Gonju have been investigated to monitor for biological damage. The room temperature of Tomb No.6 was $18.6{\sim}19.8^{\circ}C$ and the relative humidity was 94.3~99.9%. The temperature of Royal Tomb of King Muryeong was $17.3{\sim}18.53^{\circ}C$ and the relative humidity was 73.2~96.45%. The variation of relative humidity increased after setting up air vents. If the outside temperature increases, dew condensation occurs on the floor and the north side. When conditioning equipment operates, the maximum temperature differences between walls is $2.8^{\circ}C$. Bacteria from the air of the tomb and on the surface of the walls outnumbered fungi. 20 species of fungi including Alternaria sp., Aspergillus sp., Penicillium sp., and 19 species of bacteria including Pseudomonas sp., Arthrobacter sp., are identified. Microbes in the tombs may damage cultural heritage. The growth possibility of microbes should be estimated because the microbes in the tombs may damage mural painting. The interrelation between microenvironmental condition and biological damage of mural painting should be researched to come up with an long-term conservation method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.78-78
• /
• 2011

수자원 확보를 위해 건설된 저수지는 내외부위의 여러 가지 환경영향으로 인해 수질문제가 종종 발생한다. 이런 수질문제에 대처하기 위해 다양한 형태의 수질개선 장치가 고안되어 적용되고 있으며, 물순환장치도 그 중에 하나이다. 물순환장치는 수층에 산소를 공급하고 표층의 조류제어, 이취미 제거 등 다양한 목적으로 사용된다. 본 연구에서는 저수지에 설치된 대류식 물순환장치의 수질개선 효과를 평가해 보았다. 수체가 큰 저수지에서의 조사는 매우 어려운 점이 있으나, 조사방법은 물순환장치로 부터 일정거리에서 수심별 수질조사를 실시하였으며, 물순환장치가 가동되는 지역과 장치가 없는 지역에 대한 조사를 실시하여 그 차이 만큼을 수질개선 효과로 평가하였다. 현장조사는 물순환장치로부터 1m, 3m, 5m, 7m, 10m, 13m, 15m 떨어진 지점에서 유속과 수질조사를 실시하였으며, 유속은 표면유속만 측정하였고 수질은 수표면에서부터 저수지 바닥까지 조사를 실시하였다. 조사기간 동안 수체의 물리적 조건은 계절에 따라 다양한 변화를 보였으나, 양수된 저층수의 흐름은 수평방향으로 흘러들어가면서 온도변화에 따라 혼합되거나 하강하는 것으로 나타났다. 심층 혐기성층이 발달된 상황에서 물순환장치의 가동은 물순환장치 흡입구 근처의 혐기성층을 흡입하여 표층으로 확산시켰고 이로인해 주변의 수체가 물순환장치 흡입구로 밀려오면서 심층의 혐기성층이 약화되는 현상을 나타냈다. 조류가 발생한 기간중에 물순환장치에 의한 조류제어 효과는 심층수가 상승하여 확산되는 수평방향으로 반경 약 10m 지점까지 조류농도가 낮아지는 것을 확인할 수 있었으며 조류농도가 낮아지는 기간에는 그 영향범위가 조금 적어지는 것으로 나타났다. 이러한 결과로 볼때 저수지에 설치되어 운영되는 대류식 물순환장치는 심층의 혐기화 개선과 표층의 조류제어에 효과가 있는 것으로 판단할수 있으나, 조류제어에 대해서는 좀 더 심도있는 조사가 필요할 것으로 판단되었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.472-472
• /
• 2011

탁도는 물의 상대적인 흐림 정도를 나타내는 척도로서 이는 빛이 물을 통과할 때 산란시키는 부유고형물질 때문에 발생한다. 토양침식에 의하여 지표수로 유입된 토사와 광물질은 하천의 수송 및 퇴적 과정을 거치며 이동한다. 이때 하상 퇴적물은 바닥으로부터 먹이를 찾는 유기체에 의해 뒤섞이며 입자들은 일정기간동안 물의 흐름에 의해 부유상태로 남아 있게 되고, 유입되는 영양소와 빛에 의하여 성장하는 조류 또한 탁도를 증가시키는 원인이 된다. 이러한 부유물질의 증가는 수중에 태양복사에너지 전달을 방해하여 수중생태계의 먹이사슬과 저서생물의 서식환경에 많은 영향을 미치고, 수표면 온도 또한 태양으로부터 열을 흡수하는 표면 근처의 부유물질에 의해 증가하여 용존산소의 양에도 영향을 미친다. 따라서 수체내 분포하고 있는 부유물질의 종류와 양 및 공간적 분포 파악은 수질문제와 재난 예방 및 생물의 서식환경 문제를 파악하고 해결하는 데 매우 중요하다. 그러나 부유물질에 부착되어 있는 영양소, 금속, 살충제 등은 물 순환 시스템을 통하여 끊임없이 운반되고 상류유역의 흐름 조건에 따라 시공간적으로 변화하기 때문에 이를 규명하는 것이 매우 어려운 실정이다. 이러한 문제를 해결하기 위하여 광역적인 탁수환경의 분석방법으로 원격탐사(Remote Sensing, 이후 RS) 기법을 이용한 방법이 제안되고 있다. 이미 선진국에서는 광역수계의 수질관리를 위해 RS 기법을 이용하여 신속하고 정확한 수질상태 파악을 시도하고 있으며, 우리나라에서도 KOMPSAT 발사를 계기로 RS 관련 기술이 비약적으로 진화하고 있다. 그러나 RS 데이터를 활용하는데 필수적인 분광학적 특성 규명에 대한 연구는 대부분 식생과 토양에 한정되어 있으며 수체에 대한 연구는 현장조사의 어려움으로 인하여 상당히 제한적인 수준이다. 따라서 본 연구에서는 탁도의 변화에 따른 분광반사 특성을 휴대용 분광복사계를 이용하여 규명하고, 이를 Landsat 위성영상에 적용하여 새만금 유역을 대상으로 완공 직후인 2006년부터 2010년까지의 탁수환경을 모니터링 하였다. 그 결과 새만금 유역 탁수환경을 정성적으로 확인할 수 있었으며, 이를 이용하여 탁수환경 연구에 RS 기법이 효과적임을 제시하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.11
• /
• pp.991-998
• /
• 2013

A numerical study is carried out for natural convection in an enclosure with an inner hot cylinder at the center. The top wall is cold, the bottom and both side walls of the enclosure are adiabatic, and the cylinder is heated. The bottom wall is heated locally at the middle. The ratio (w) is defined by as the width of the bottom wall to that of the heated local area. The immersed boundary method (IBM) is used to model an inner circular cylinder based on the finite volume method (FVM). This study investigates the effect of w on natural convection in an enclosure with an inner heated cylinder for Rayleigh numbers of $10^6$. At $6Ra=10^6$, thermal and flow fields show time-dependent characteristics after their full development.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1109-1116
• /
• 2009

To the development of construction techniques and construction of glass-walled structure is generalized. Existing wall to support the role of the vertical load was lose. Features and the beautiful side of the curtain wall job was to be highlighted. Carriage access to the interior of the windows will cause pain in the neck with a cold feeling. And in the windows, drafty windows, under floor heating occurs despite the condensation phenomenon occurs. droplets that occurs around the window (the cause of the mold) in summer and winter, the heat energy and move through the glass is warmer outside. Therefore, to reduce energy efficiency affects absolutely. When you apply heat to the carriage window, the surface of the glass system, the spread of the cold air does not occur. Therefore, energy savings cars and heating of the interior is cold.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.4
• /
• pp.199-205
• /
• 2021

The distributing board in directly installed on the ground or the bottom surface of the building, and when vibrations such as earthquakes or external shocks occur, the possibility of damage or malfunction of electric components such as internal power devices, wiring, and protection relays increases. Recently, the need for a seismic type distributing board is increasing, and research and development of a distributing board having a vibration damping function and product launch are being conducted. In this paper, an IoT-based data collection device system capable of measuring vibration and environmental data of distributing board was designed and implemented. When vibration occurred on the distributing board, data was stored and visualized in the MySQL DB through Node-RED for monitoring and data storage using the MQTT protocol for reliable messaging transmission. The test was conducted by attaching the IoT device of the distributing board, and data was collected in real-time and monitored through Node-RED.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.32-44
• /
• 2001

The purpose of this study was to investigate the effects of Er : YAG laser on cutting efficacy and temperature changes of dentin. We used the dentin specimens of human premolars and molars which contain the physiologic saline and maintain the pulpal pressure in dentinal tubules. Each specimen was exposed to Er : YAG laser with non-contact handpiece type delivery system under different treatment condition of irradiation energy, pulse repetition rate, and exposure time. Two procedures were conducted by the presence of water flow during lasing. The specimens were grouped by thickness of dentin. We investigated the cavity pattern, volume, and temperature change of dentin specimen to determine the cutting efficacy and temperature rise of Er : YAG laser, and obtained following results. 1. Cutting volume of dentin was increased by increasing the irradiation energy, pulse repetition rate, and exposure time(P<0.05). 2. Margins of abulated cavities were sharp and clean and floors of cavities were conical in shape and showing smooth surfaces. Upper diameter of abulated cavities were increasing as laser parameter of irradiation energy, pulse repetition rate, and exposure time were increased. A few cracks were observed on abulated surfaces under treatment condition of laser parameter with 150mJ, 5Hz, and 5sec. 3. Temperature was increased as laser parameter of irradiation energy, pulse repetition rate, and exposure time were increased, and temperature rise was decreased as dentin thickness was increased(P<0.05). 4. Temperature rise was decreased under water flow compared with no water flow during laser exposure(P<0.05). From these results, we think that the method of using a Er:YAG laser would be effective and safe in cutting dentin for clinical application.

• Journal of Bio-Environment Control
• /
• v.29 no.1
• /
• pp.52-61
• /
• 2020

The natural change of winter night temperature from 00:00 to 04:30 O'clock with the different height of thermal screen in a venlo type glasshouse (W59×L68×H5.9 m) was studied using computational fluid dynamics (CFD). At the early stage of CFD analysis, the room temperature decrease of glasshouse with the 5.9 m height of thermal screen were faster than it with the 4.1m height of thermal screen, but at 2 hr after analysis it was slower than in it with the 4,1m, the temperature difference was 0.6℃ after 4 hr. If we consider that turn on the heater when the temperature were decrease below 13℃ at 1hr after CFD analysis, it is good for energy saving in the glasshouse with the 4.1 m height of thermal screen rather than in it with the 5.9 m height, because of the temperature decrease were slow during 2 hrs after analysis. The airflow at the height of 2 m which were grown tomato were fast and wide in the glasshouse with the 5.9 m height thermal screen rather than in it with the 4.1 m, the speed difference was 0.034m·s^-1 at 1hr after CFD analysis. The effect of temperature decrease in summer season were compared with the different height of shading screen from 12:00 to 14:30 O'clock. The height of shading screen were 5.7, 3.9 m, the gap of it were 30%. The air-inflow quantity by the fan with duct at lower part of venlo glasshouse was 0.67 ㎥·s^-1 until 1hr and to increase 3 times of it from 1hr after analysis. The roof window were open 100%. Until 1hr of CFD analysis, the temperature in the 30% open of shading screen was 0.9℃ higher than in the none shading screen. From 13:00 O'clock when the air-inlet quantity to increase 3 times, the temperature in case 30% gap of shading screen were decreased compare with the none shading screen, the temperature difference was 0.5℃ at 14:30 O'clock. The temperature on the floor surface in case 30% gap of shading screen were lower with it's height increase, the temperature difference was 8℃ compare with none shading screen. The relative humidity difference were insignificant by the height and gap of shading screen.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.5
• /
• pp.638-644
• /
• 2010

Numerical predictions of a fully developed turbulent flow through a square duct ($30mm{\times}30mm$) with twisted tape inserts and with twisted tape plus interrupted ribs are respectively conducted to investigate regionally averaged heat transfer and flow patterns. A rib height-to-channel hydraulic diameter(e/$D_h$) of 0.067 and a lengthto-hydraulic diameter(L/$D_h$) of 30 are considered at Reynolds number ranging 8,900 to 29,000. The interrupted ribs are axially arranged on the bottom wall. The twisted tape is 0.1 mm thick carbon steel sheet with diameter of 28 mm, length of 900 mm, and 2.5 turns. Each wall of the square channel is composed of isolated aluminum sections. Two heating conditions are investigated for test channels with twisted tape inserts and rib turbulators: (1) electric heat uniformly applied to four side walls of the square duct, and (2) electric heat uniformly applied to two opposite walls of the square channel. The results show that uneven surface heating enhances the heat transfer coefficient over uniform heating conditions, and significant improvements can be achieved with twisted tape inserts plus interrupted ribs.

• Journal of the Korean Geographical Society
• /
• v.41 no.5 s.116
• /
• pp.513-526
• /
• 2006

The timing and extent of glaciations during the Late Quaternary in the South Shetland Islands, West Antarctica were defined using field mapping, geomorphic analysis and radiocarbon dating. Landforms of glacial erosion and deposition, in particular subglacial meltwater channel erosion, suggest that at least three glaciations occurred during the late Quaternary within the study region. During the global LGM, glacial troughs (such as Maxwell Bay and Admiralty Bay) were overdeepened by an ice stream moving south from $an\sim1000m-thick$ ice cap centered on the present-day continental shelf to the north. This ice was responsible for the subglacial meltwater channel erosion, and glacial polished and striated bedrock on the Fildes Peninsula. The recent local glaciations occurred about 2,000 years ago and during Little Ice Age (LIA). During these glaciations, glaciers were less extensive than the previous one and less erosive as a cold-based ice