• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.567-570
• /
• 2009

The present study conducted comparative evaluation of wet dry floor heating systems using geothermal heat pump. Circulation hot water from geothermal heat pump which is $10{\sim}15^{\circ}C$ lower than that from boiler was used. In order to access indoor temperature ($25^{\circ}C$) it took 74 minutes for dry type and 247 minutes for wet type. Average floor temperature was $23.89^{\circ}C$ for wet type and $32.66^{\circ}C$ for dry type. Energy saving rate gradually increased by 66% after 138 minutes. In the results, for floor heating system using low temperature circulation water, wet type was not enough to meet stable and comfortable radiant floor heating due to low floor temperature and access time to indoor set temperature. While dry type was practicable for stable floor heating due to fast rise of indoor set temperature and comfortable floor temperature.

• New & Renewable Energy
• /
• v.5 no.4
• /
• pp.60-65
• /
• 2009

The present study was conducted for a comparative evaluation of wet and dry floor heating systems using geothermal heat pump. We circulated hot water from geothermal heat pump which is $10{\sim}15^{\circ}C$ lower than that from boiler. In order to access indoor temperature ($25^{\circ}C$) it took 74 minutes for dry type and 247 minutes for wet type. Average floor temperature was $23.9^{\circ}C$ for wet type and $32.7^{\circ}C$ for dry type. Energy saving rate gradually increased by 66% after 138 minutes. As a result, in case of floor heating system using low temperature circulation water, dry type was more practicable for stable floor heating than wet type in terms of floor temperature and access time to indoor set temperature.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.884-889
• /
• 2015

Appropriate evaluation of thermal insulation property of structural member and valid control of cooling/heating energy are important for improving building's energy efficiency. The typical heating system of house in Korea is the floor heating one. The radiation heating system is not only appropriate to climate and geographic conditions of Korea, but also advantageous to provide emotional comfort by the warm feeling of floor. Based on living conditions in Korea, scaled models of the wooden house and concrete house were designed. The ceiling was made of styrofoam insulation and the four sided walls and bottom were made of plywood and concrete, respectively. The floor was heated by heating film. Indoor vertical temperature distributions by floor heating system were measured by thermocouple, and surface temperatures on walls were measured by infrared thermography. Also, thermal insulation property of wooden wall was evaluated to build database for improving energy efficiency of wooden building. It is expected that collected data during tests of various types of floor and wall composition could be referenced for evaluating thermal environment of actual conditions of houses.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1997.11a
• /
• pp.102-106
• /
• 1997

본 연구는 실내 온열환경에 대한 인간의 온냉감을 정밀하게 평가하기 위해 바닥난방이 실시되고 있는 겨울철 아파트의 거실에 대하여 공간내의 온도분포를 조사하는 동시에 신체부위별로 온냉감을 조사하였다. 실내의 온도분포 측정은 서울과 부산의 두 장소에서 실시하였으며, 온냉감에 대한 평가는 서울에서 남자 31명, 여자 71명, 부산에서 남자 11명, 여자 23명에 대하여 수행되었다. 결과는 중앙집중식 난방이 실시되고 있는 거실의 바닥으로부터 10cm높이와 170cm 높이에서의 온도차이는 서울의 아파트가 3.2 $^{\circ}C$, 부산의 아파트가 2.$0^{\circ}C$로 나타났다. 겨울철 실내의 온냉감 조사는 하루 3 회 실시되었으며, 신체의 3개부위에 대한 온냉감과 전체적인 온냉감이 7점 척도로 평가되었다. 결과는 발과 얼굴, 무릎과 얼굴, 발과 전신사이에 온냉감의 차이가 있는 것으로 나타났다. 발과 무릎 부위가 얼굴에 비하여 추운느낌을 강하게 가지며, 전체적인 온냉감은 얼굴부위에서의 평가와 유사한 수준을 나타냈다. 난방이 단순한 온도조절의 범위를 넘어 인체의 온열쾌적감을 만족시키기 위해서는 신체의 부위별로 느끼는 온냉감을 정밀하게 평가하여 난방의 방법을 조정하여야 하는데, 이 연구의 결과는 난방의 방법 결정에 기초자료로 활용될 수 있을 것이다.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.381-386
• /
• 2008

In this study, the energy characteristic of automatic thermostatic valves according to each heating method in floor radiant heating system were researched by computer simulation. For the analysis of unsteady heat transfer phenomena in household, the method of using electrical equivalent R-C circuit is applied, and radiation heat transfer between panel, ceiling and walls in household is calculated by enclosure analysis method. The parametric study on heating method, valve's control method, outdoor air condition, supply heating water temperature, supply flow rate are performed to compare energy characteristic, respectively.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.40 no.6
• /
• pp.6-14
• /
• 1998

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.177-180
• /
• 2012

Korea residential housing generally use wet floor heating system 'Ondol' which consist of insulation cushioning, lightweight foamed concrete, hot water pipe and mortar on top of reinforced concrete slab. Wet floor heating system's installation process is too complicate and difficult to supervise field for continuing assurance quality. Also, this method has a huge impact on the progress of construction because it take a long time to cure finishing mortar and lightweight foamed concrete. Therefore, it is considered a disturbance factor of reduction of construction duration for enhancing competitiveness. In this study, we conducted an experiment about the radiant heat performance and temperature difference on upper panel of rolled dry floor heating systems which is jointly developed by Kolon global and Sumisho Metalex for remodeling housing, studio apartment and the urban-life housing.

• 보일러설비
• /
• no.2 s.157
• /
• pp.88-99
• /
• 2007

• Journal of the Korean Solar Energy Society
• /
• v.28 no.6
• /
• pp.15-23
• /
• 2008

The article deals with system technology of a new solar heating system which systematically combines exiting solar collector technology, auxiliary electrical water heating, floor heating system and well insulated construction method and its application of this system to apartment house heating system in the cold region, and also analyzed performance of the new system in terms of technical and economic feasibility. Results shows that energy efficiency approaches up to 50% of the energy consumption of local construction from 1980 to 1981. The implementation of "DQ technology" to floor heating system achieved from 79% to 85% of the energy-saving benefits comparing to other housing units which were supplied by the local district heating plant.

• 보일러설비
• /
• s.94
• /
• pp.105-106
• /
• 2001