• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.541-550
• /
• 1988

Natural convection in a square enclosure was investigated numerically for low prandtl number fluids using Finite Element Method. In case of Ra=10$^{4}$, 10$^{5}$ and 10$^{6}$ the temperature gradient decreases gradually at the lower end of the hot wall(or at the upper end of the cold wall) as prandtl number decreases in the range of 0.01 .leq. Pr .leq. 10. Maximum heat transfer occurs at a somewhat higher point from the lower end of hot wall(or at somewhat lower point from the upper end of the cold wall) and it draws near to the lower end of the hot wall(or draws near to the upper end of the cold wall) with increasing prandtl number. The flow in the enclosure appears as an Unicell Pattern for Ra .leq. 10$^{4}$ and secondarily flows(or tertiary flows) appears in the core region for Ra .geq. 10$^{5}$ . The line joining the center of secondary cells skewes in a clockwise direction as the Prandtl number decreases.

• Proceedings of the Korean Professional Engineer Association Conference
• /
• 1994.02a
• /
• pp.82-84
• /
• 1994

• Journal of the Korean Institute of Gas
• /
• v.3 no.3 s.8
• /
• pp.23-28
• /
• 1999

Variation of explosion characteristics by the blocks in closed vessel was investigated to analyse the effect of the block volume(volume blockage) and the surface area of the blocks(ratio of block surface area to vessel volume). Volume and surface area of blocks in explosion vessel were changed by the combination of blocks. The volume of explosion vessels was 270 liter, and the LPG-air or NG-air mixtures were ignited by the electric spark. Explosion pressure was measured with the strain type pressure transducer. From the experimental results, explosion pressure was decreased by the increase of the volume blockage and the block surface area. And the decrease of explosion pressure was more affected by the volume blockage than the surface area.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.2
• /
• pp.43-51
• /
• 2020

After the accelerated aging, the bulkhead initiator using high explosives was carried out to verify aging characteristics. The Thru-Bulkhead Initiator operates by transmitting shock-wave generated from micro-initiator to the acceptor and the ignition explosives through the bulkhead. In order to evaluate the life-time of the product, the accelerated aging condition was set according to the life-time, and the ignition performance of the sample was measured every 10 cycles by measuring the delay time and the maximum pressure through the 10cc closed bomb test. In addition, variance analysis was used to determine aging.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.6
• /
• pp.53-61
• /
• 2022

The estimation method of combustion efficiency has been introduced by using closed bomb test(CBT). The Noble-Abel equation of state was applied to consider the real gas effects to take account of high operation pressure about a couple of 100 atm. of CBT. The heat loss through the CBT wall was considered. The volume change of grain was calculated by applying form functions, which estimated combustion efficiency of 8 different gain shapes. The combustion estimation method proposed in this study was fairly validated by the comparision with the pressure-time history data of the CBT experiments. The effects of both grain shape and propellant loading density were analyzed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.146-150
• /
• 1993

screw압축기는 진동이 적고, 소형이면도 그효율 유지가 용이하다는 특징을 가지고있으며, 왕복압축기와 같은 crank가 없고 원통형 밀폐용기 내에 암,수 로타가 서로 반대 방향으로 맞물려 회전하면서 로타홈과 케이싱 사이에 생기는 공간의 용적이 로타의 회전에 의해서 가스를 연속적으로 흡입, 압축, 배출하는 용적형압축기이다. 본 연구는 screw 압축기의 성능에 큰 영향을 미치는 로타의 치형함수의 기하학적성질 및 제한사항을 서술하였고, 로타의 형상이 특성값에 미치는 영향을 이론적으로 해석 하기 위하여, 임의의 치형을 갖는 로타를 만들고, 이것과 맞물리는 상대로타의 치형을 설계하여 seal line length와 blow hole area을 계산하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.6
• /
• pp.1321-1329
• /
• 1989

본 논문에서는 성층화된 용액ㅇ네 수평방향으로 온도구배가 가해지는 경우에 있어서 두 부력인자의 상대적 크기에 따라 나타나는 유동형태와 그에 따른 온도, 농도 분포 및 열전달특성을 수치적으로 연구하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.2
• /
• pp.349-358
• /
• 1988

Natural convection velocity and temperature profiles are obtained approximately in the core at boundary layer flow regime for varying Prandtl number in a low aspect ratio rectangular Enclosure. Analysis is based on the formally obtained core flow equations using the multiple scales method. Results show good agreement with the existing works for $P_{r}$ ~ 1. No comparison, however, is possible yet for $P_{r}$ >> 1 and $P_{r}$ < 1 due to the lack of available date. It is shown here that boundary layer flow regimes are governed by two parameters, A $R_{a}$$^{1}$4/ and A( $P_{r}$ $R_{a}$)$^{1}$4 for $P_{R}$.geq. 1 and $P_{r}$ < 1 respectively.ely.ively.ely.y.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.1
• /
• pp.207-213
• /
• 1990

Natural convection heat transfer in rectangular air enclosure was studied interferometrically and numerically for the use of adiabatic and constant temperature horizontal boundary conditions. In the isothermal horizontal boundary case with the temperature difference ratio, .DELTA. $T_{v/}$.DELTA. $T_{H}$ .simeq. 1 temperature distribution in the enclosure is strongly stratified and the average Nusselt Number is higher than that of adiabatic horizontal boundary case.ase.

• Korean Journal of Plant Resources
• /
• v.28 no.2
• /
• pp.243-252
• /
• 2015

This study was performed to establish a production system for in situ and ex situ conservation of Elsholtzia minima Nakai, an endemic plant grown in Jeju Island. Moreover, this study aimed to identify root-growth characteristics according to the use of pre-treatment agents and seedling growth effect according to fertilizer application. The mean temperature was similar in greenhouse and vinyl-moist chamber, but air humidity was higher in vinyl-moist chamber than in greenhouse. After stem planting of Elsholtzia minima Nakai, initial root growth was observed after 10 days in greenhouse and after 7 days in vinyl-moist chamber. Root growth rate was more rapid in vinyl-moist chamber. Moreover, survival rate, root growth rate and root number was slightly higher in vinyl-moist chamber than in greenhouse, indicating that vinyl-moist chamber is more effective in plant growth. When pre-treatment agents were used to remove root growth-inhibiting substances, a higher root growth rate of more than 95% was found in pre-treatment groups, excluding the group treated with AgNO₃ at 77.5%. Thus, Elsholtzia minima Nakai is thought to have less root growth inhibitors. In the analysis of nitrogen application rate and Osmocote application by seedling container, a difference was found in survival rate and growth according to application rate and container conditions. When Osmocote, a slow release fertilizer, was applied to the soil surface around each culture container, survival rate and the growth of aerial and root parts were most favorable. Thus, Osmocote fertilizer is thought to be desirable for seedling propagation of Elsholtzia minima Nakai.