• Journal of Conservation Science
• /
• v.32 no.2
• /
• pp.261-271
• /
• 2016

We have investigated relationship between particle characteristics of oyster shell powder pigments and their performance such as workability and durability. Three types of the powder which have different particle size and shape(spherical, elliptical, columnar and irregular) distributions were made for this study and we evaluated spreadability and uniformity for workability, and adhesion and surface hardness for durability of painted films by each powder paints. As a result, we found out that the workability and durability of the paints were influenced by the particle shape distribution more than the particle size distribution. The durability, especially, was enhanced as the ratio of columnar particles in the powders was increased. This result verifying the important factor affecting the durability can be base data for selecting oyster shell white paint and assessing its quality for conservation and restoration of Dancheong, as well as to produce high quality traditional paints.

• Journal of Global Scholars of Marketing Science
• /
• v.2
• /
• pp.133-158
• /
• 1998

최근의 많은 연구에서 정보기술에 대한 서비스제공 및 서비스 질(qualiy)에 대한 평가와 측정도구의 개발이 활발하게 이르어져 왔다(Pitt et al 1998) 또한 서비스 주체가 인적 요인에서 무형의 매체로 전환되고 있으며, 이러한 원인은 정보기술의 응용성에서 찾을 수 있다. 따라서 본 연구에서는 기존의 서비스 관점을 정보기술의 응용분야의 한 핵심이 될 수 있는 정보통신분야의 이동 휴대통신을 중심으로 서비스 질을 평가하여 문제점과 대안을 탐색하고자 하였다. 정보통신분야는 기간산업으로서의 역할과 그 중요성이 더욱 증대되고 있으며, 개별 기업차원에서도 정보기술 인프라는 중요한 경쟁요인이 될 수 있다. 그러나 이 분야에 대한 연구가 미흡하고 단순한 지표를 통한 비교 등의 연구 방법론에 있어서도 미비하다고 볼 수 있다. 따라서 본 연구에서는 정보통신분야의 중요성을 인식하고 초기 단계의 이동 휴대통신 분야의 핵심역량을 규명하고 향후 서비스 전략의 성공요인을 찾아내고자 하였다. 이러한 연구를 수행하기 위해 서비스만족 변수를 대리 측정도구로 이용하여 정보통신 기술 부분, 정보제공 부분, 비용우위 및 차별화 부분을 통해 계층적으로 접근하였다. 본 연구의 결과는 크게 세부분으로 요약된다. 첫째, 정보통신기술 부분에 대해 혁신적이고 안정적일 때 서비스만족도는 우수한 것으로 분석되었다. 또한 통신장비 및 부가장비의 우수성도 서비스부분에 미치는 영향력이 큰 것으로 나타났다. 둘째, 정보제공과 서비스만족과의 관계에서는 필요정보에 대한 서비스 밀착도가 높으면 서비스만족도는 높은 것으로 분석되었다. 또한 정보제공 분야의 서비스 개발력은 서비스만족도에 미치는 영향정도도 크게 작용하는 것으로 나타났다. 셋째, 차별화 및 비용우위와 서비스만족과의 관계도 매우 유의한 것으로 분석되었다. 특히, 비용 및 요금은 서비스만족도에 결정적 영향변수로 나타났으며, 광고 및 홍보부분도 만족도의 영향변수로 분석되었다. 이러한 연구결과는 향후 서비스전략에 응용될 수 있으며, 이동 휴대통신분야의 성공요인을 가시적으로 분석할 수 있다. 본 연구의 한계점은 첫째, 실제 서비스를 제공하는 서비스 주체의 객관적인 평가가 부족하였고 이러한 상횡에서 정보통신 기술 서비스 능력이 잘 반영되지 못했다는 점을 들 수 있다. 둘째, 이동 통신의 분야별 연구를 통해 비교 평가가 세부적으로 이루어지지 못했으며 연구방법상 샘플조사의 한계와 객관적인 응답자료를 확보하기가 어려웠던 점을 들 수 있다. 마지막으로 분석결과에서는 변수간의 유의성이 있는 것으로 볼 수 있지만 측정도구가 미약하며, 향후 지속적인 연구와 측정도구의 개발이 필요하다고 볼 수 있다.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2009.05a
• /
• pp.123-126
• /
• 2009

최근 생체 신호 센싱 기능의 의류가 연구 개발되어 왔으나, 생체 신호 측정 시 착용자의 동작에 의한 치명적인 잡음이 발생하는 문제가 지속적으로 보고되어 왔다. 이에 본 연구는 심전도 센싱 의류를 기반으로 생체 신호 측정의 정확성을 향상시키기 위하여 착용자의 동작에 의한 영향을 최소화할 수 있는 심전도 센싱 스마트 의류의 모형을 개발하고자 하였다. '일자형 절개 타입', '십자형 절개 타입', '엑스형 절개 타입', '곡선 엑스형 절개 타입'의 총 네 가지 타입의 생체신호 센싱 스마트 의류의 시안을 설계하고 제작하였다. 디자인 시안은 민소매 형태의 남성용 티셔츠로 신축성 있는 소재를 사용하여 인체 굴곡을 따라 의복과 전극이 밀착될 수 있도록 하였으며, 트랜스미터를 이용하여 메인 컴퓨터로 데이터가 무선 전송되게 하였다. 본 연구에서는 개발된 4 가지 의류 타임을 기반으로 인체의 정지 및 동작 상태에서의 심전도 센싱 성능을 평가하기 위해 동작에 따른 전극의 변위를 측정하고, 심전도 측정 평가를 실시하여 SNR을 분석하였다. 본 실험 곁과를 반영하여 의류 디자인 시안의 수정 및 보완 과정을 거친 후, 최종적으로 동작 잡음을 최소화하는 생체신호 센싱 스마트 의류 디자인 모형을 제시하였다.

• Journal of Radiation Protection and Research
• /
• v.40 no.3
• /
• pp.124-131
• /
• 2015

Radiation exposure to humans can be caused by the gamma rays emitted from natural radioactive elements(such as uranium, thorium and potassium and any of their decay products) of Naturally Occurring Radioactive Materials(NORM) or Technologically Enhanced Naturally Occurring Radioactive Materials(TENORM) added consumer products. In this study, assume that activity of radioactive elements is $^{238}U$, $^{235}U$, $^{232}Th$ $1Bq{\cdot}g^{-1}$, $^{40}K$ $10Bq{\cdot}g^{-1}$ and the gamma rays emitted from these natural radioactive elements radioactive equilibrium state. In this study, reflected End-User circumstances and evaluated annual exposure dose for products based on ICRP reference voxel phantoms and ICRP Recommendation 103 using the Monte Carlo Method. The consumer products classified according to the adhere to the skin(bracelet, necklace, belt-wrist, belt-ankle, belt-knee, moxa stone) or not(gypsum board, anion wallpaper, anion paint), and Geometric Modeling was reflected in Republic of Korea "Residential Living Trend-distributions and Design Guidelines For Common Types of Household.", was designed the Room model($3m{\times}4m{\times}2.8m$, a closed room, conservatively) and the ICRP reference phantom's 3D segmentation and modeling. The end-user's usage time assume that "Development and Application of Korean Exposure Factors." or conservatively 24 hours; in case of unknown. In this study, the results of the effective dose were 0.00003 ~ 0.47636 mSv per year and were confirmed the meaning of necessary for geometric modeling to ICRP reference phantoms through the equivalent dose rate of belt products.

• Journal of the Korean Society of Radiology
• /
• v.15 no.7
• /
• pp.943-948
• /
• 2021

The purpose of this study was to investigate changes in surface dose due to increased scattering of gamma rays from patients injected with ^99mTc and ¹⁸F, which are radioactive isotopes, in close contact with materials with high atomic number such as the walls of the stable room. Prepare ^99mTc and ¹⁸F by injecting 20 and 10 mCi respectively into the NEMA phantom, and then measuring the surface dose for 60 minutes by positioning the phantom at a height of 1 m above the surface, at a distance of 0, 5 and 10 cm from the wall, and at the same location as the phantom facing the wall. Each experiment was repeated five times for reproducibility of the experiment and one way analysis of variability (ANOVA) was performed for significance testing and Tukey was used as a post-test. The study found that surface doses of 220.268, 287.121, 243.957, and 226.272 mGy were measured at ^99mTc, respectively, in the case of empty space and in the case of 0, 5 and 10 cm, while those of ¹⁸F were measured at 637.111, 724.469, 657.107, and 640.365 mGy, respectively. In order to reduce changes in surface dose depending on the patient's location while waiting, it is necessary to keep the distance from the ground or the wall where the patient is closely adhered to, or install an air mattress, etc., to prevent the scattered lines as much as possible, considering the scattered lines due to the wall etc. in future setup of the patient waiting room and safety room, and in addition to the examination, the external skin width may be reduced.

• Journal of the Korean Society of Radiology
• /
• v.15 no.6
• /
• pp.899-909
• /
• 2021

In Musculoskeletal ultrasound examination, a linear transducer (12-5 MHz) with a contact surface length of 6 cm, which is commonly distributed in medical institutions, does not contact with bent fingers and wrist depressions only by using a conventional liquid ultrasound gel, which causes image loss. In order to solve this image loss, the use of commercially available Water gel pad is increasing. However, it is a disposable medical product. Repeated use is prohibited and expensive. In this study, in order to reduce the economic burden caused by the use of the commercialized Water gel Pad, we searched for water-soluble food thickener powder that can be easily purchased around our lives and manufactured Gel pads. Among them, kappa-Carrageenan Gel Pad, iota-Carrageenan Gel Pad, and Agar-Agar Gel Pad satisfied the evaluation criteria without artifacts in image evaluation using the N-365 Multipurpose Phantom. Also, the price to purchase the food thickener powder was about 38 times cheaper than the existing commercialized Water gel pad. As a result, if you use the food thickener powder such as kappa-Carrageenan, iota-Carrageenan and Agar-Agar to make solidified elastic Gel pad without a cover instead of the commercially available expensive disposable Water gel pad, the convenience and usefulness of use are improved. It is judged that the manufactured Gel pads can contribute well to the role of efficient ultrasound propagation medium.

• Journal of Science Education
• /
• v.42 no.2
• /
• pp.132-147
• /
• 2018

The goal of this research is to suggest a theoretical process-centered assessment model based on Learning Progressions of key competencies in the context of STEAM instructions. The "Process-Products Combined Module-type (P2CM) STEAM Assessment Model (P2CM STEAM Assessment Model, hereafter) can be used both as an instructional model and as an assesment model, applicable for various STEAM topics and instructional types. consists of 3 axes. The first X axis stands for 4C competencies that should be emphasized through STEAM instruction. The second Y axis stands for the types and the hierarchy of STEAM instructions. The third Z axis stands for the assessment standards based on LP. We also exemplified an assessment module combined creativity competency with creativity-based instruction based on . Based on the research results, we suggested elaboration of assessment models based on Korean LP research outcomes, development and supply of formative assessment models through field-based in-depth research, modification of formative assessment models with the participation of teacher communities and in-service teachers, and the necessity of further research on assessment models for tracking LP.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.187-202
• /
• 2013

The electronic medical device industry and the relevant market have been greatly expanded owing to various factors, such as the advent of the aged society and the spread of the desire for well-being in developed countries, and rapid development of China, India and other emerging markets. The electrical stimulator is one of electronic medical devices most commonly used in homes. The electrical stimulator is widely used for pain relief, rehabilitation, muscle conditioning and others. Since it is mainly used in homes, it is very important to assure the safety and performance for protection of users. However, there is no guideline on evaluation of safety and performance of such electrical stimulator for home use. In this study, various local and foreign references were reviewed to develop the internationally harmonized procedures for safety and performance evaluation of the electrical stimulator and test items, specifications and methods are proposed. In addition, such proposed test items were validated to decide the internationally harmonized tests for safety and performance evaluation. This study will contribute to improvement of quality and safety of electrical stimulators for home use and help the Korean medical device industry have the international competitiveness.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.2
• /
• pp.33-40
• /
• 1994

알루미늄 코팅막은 부식환경으로부터 강판을 보호하는 데에 자주 사용된다. 그러나 이 코팅막은 때때로 사용조건에 따라 제한을 받는다. 아무리 강판상에 치밀한 양질막을 코팅시켰다 할지라도, 사용중 이 피막이 손상을 받아서 강판이 노출되는 경우는 강판과의 갈바닉(Galvanic)작용으로 급격한 부식을 일으킨다. 본 연구는 내식성 개선을 목적으로 해서, 고밀착성의 코팅막을 제공하는 비평형프라즈마 프로세스인 이온프레이팅법에 의해 냉간압연강판상에 Al-Mg합금 코팅막을 제작했다. 제작된 막들은 우선, EMPA측정에 의해 원소조성분석을 한 후, 상구조분석 및 표.단면의 몰포로지(Molphology)를 X선 회절 및 주사형 전자현미경(SEM)에 의해 관찰했다. 또한, 이들막은 탈기시킨 3%NaCl용액중 양극분극 측정을 통해서 내식특성에 대한 평가를 행했다. 이들의 결과에 의하면, 알루미늄과 마그네슘의 조성비에 따라 주상, 미결정 및 아몰포스(Amorphous)조직을 보이는 금속간화합물이나 고용체의 Al-Mg박막이 나타났다. 이들 Al-Mg합금 코팅막은 강판과의 갈바닉 부식작용에 대한 방지 및 부동태 피막의 형성을 촉진하는 등의 좋은 내식성을 나타냈다.

• The Journal of the Korea Contents Association
• /
• v.12 no.2
• /
• pp.310-321
• /
• 2012

This study was conducted to establish collaborative governance for North Korean Refugees' settlement support service. Three major actors were identified. At the central government level, there is no control center to coordinate various functions. This study suggested three roles for central government in collborative governance, which are policy planning based on public value, allocating financial resources to implementing organizations, and program evaluation for securing public accountability. The rloes of local government are establishing communication channels between implementing participants, maintenancing good relations, and coordination. Finally, the role of private actors is developing high quality service programs, connecting local resources for settlement service.