• Korean Journal of Food Science and Technology
• /
• v.44 no.5
• /
• pp.559-567
• /
• 2012

The storage quality of ready-to-eat Campbell table grapes which were packaged under modified atmospheres was investigated in order to examine the effect of high $O_2$ and $CO_2$ on the fruit. Fresh table grapes with 10-15 berries were packed into polypropylene (PP) trays and were top-sealed with polythylene terephthalate/PP film. The initial gas compositions inside the packages were air, 20% $O_2$/10% $CO_2$/70% $N_2$, and 40% $O_2$/60% $N_2$. Sealed packages with low density polyethylene film bags and perforated PP trays were also used as a further treatment and control, respectively. The quality attributes were assessed during storage at $5^{\circ}C$ for 28 days. Fruit packaged in high $CO_2$ concentration showed the lowest viable cell counts of inherent microorganisms among all samples, although they suffered from severe off-flavors. High levels of $O_2$ significantly lowered flesh weight loss and maintained the flavor of grape. In an overall sensory aspect, the high $O_2$ and $CO_2$ packages exhibited greater scores than the air and control at the end of the storage period. Other quality attributes showed no significant differences among treatments. Results suggest that packaging with an appropriate combination of high $O_2$ and $CO_2$ can be used as an effective processing treatment for improvement of the storability of ready-to-eat table grapes.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.65-70
• /
• 2005

The KOMPSAT program is carrying out successfully in spite of the short domestic space development history, but there are still many difficulties in Koreanization of most core parts. Because the development of core parts is essential to participate in the advanced nations in space based on the mid-long term national space program, KARI has carried out development of Fill/Drain valve for propellant/pressurant supply of satellite, which has high possibilities to be koreanized, with Hanwha Corp.. This paper summarizes overall processes of development including design, manufacturing and test, and finally 4 sets of modules were successfully made. Also the satisfaction of performance requirements are verified through acceptance tests.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.51-51
• /
• 2011

PLA(Poly(lactic acid))는 옥수수, 사탕수수와 같은 천연재료에서 얻어진 젖산(lactic acid or lactide)을 원료로 하여 합성한 생분해성 고분자로서 석유자원의 고갈과 환경오염에 대한 관심이 고조됨에 따라 합성고분자를 대체할 재료로 각광받고 있다. 일반적인 PLA의 장점으로 투명성, 굽힘강성, 방수성, 가열밀봉성 등이 있으며, 단점으로는 열안정성, 내구성, 충격 강도 등이 있다. PLA를 섬유로 사용될 경우 농림 토목용 생분해성 소재 뿐 아니라 실크의 광택과 뛰어난 드레이프성, 감촉을 갖는 장점이 있다. 또한 수분을 신속하게 흡수하여 발산시키는 특성을 가지고 있고, 낮은 연소열과 가스량, 자기 소화성 등의 방염 특성 등을 지녀 의류 인테리어 소재로 매력적인 특성을 가지고 있다. PLA는 바이오고분자 중 비교적 높은 용융온도를 가지고 있지만 특히 염색 및 가공조건 등 고온 처리에 의해 기계적 강도가 저하되는 단점이 있어 내열성 및 기계적 강도의 향상이 필수적이다. 내열성 및 기계적 강도 향상을 위한 가장 손쉬운 방법은 고분자 사슬을 가교시키는 것으로서 열처리 또는 감마선, 전자선, 자외선 조사를 이용할 수 있는데 열에 의한 가교는 균일한 열전달과 고온이 필요하며 감마선 및 전자선 조사는 설비의 고비용과 방사성 노출 위험으로 인해 비친환경적이다. 따라서 다루기 쉽고 비용이 적게 들고 친환경적인 장점을 가진 자외선 조사법을 이용한 PLA의 광가교의 연구가 필요하다. 본 연구의 목적은 PLA 직물의 열안정성과 기계적 특성을 향상시키기 위해 광개시제와 자외선 조사를 이용하여 PLA 직물의 광가교를 수행하였다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1989.06b
• /
• pp.35-47
• /
• 1989

누설방지를 목적으로 산업용 기계에서 많이 사용되고 있는 기계평면시일(mechanical face seal)은 기능상 높은 신뢰도를 요구하고 있다. 이를 위하여 동적 안정성이 커야되고, 밀봉된 유체의 누설을 최소화시킬 수 있는 정도에서 시일의 수명을 결정해야 한다. 이와같이 상반된 성질을 동시에 만족시키기 위하여 시일 성능에 영향을 미칠 수 있는 기하학적 요인들을 고려하여 해석해야 한다. 일반적으로 미끄럼 접촉운동을 하고 있는 시일에서 시일링 간극(sealing gap)이 수 micron 단위라는 점을 고려할때 시일 조립시 중심맞추기(alignnment) 정미\ulcorner 결여 및 회전축의 자중량 등에 의한 기계적 변형(mechanical distortion), 특히 고온의 분위기에서 작동되고 있는 시일의 열변형(thermal distortion)은 시일의 경사집에 커다란 영햐을 주고 있다. 또한 누설을 최소화시킬 목적으로 시일 링(seal ring) 을 시일의 경사짐에 커다란 영향을 주고 있는 스프링의 강성도를 증가시키면 상대 미끄럼 운동을 하고 있는 접촉명이 건조마찰에 의한 마멸이 진행되어 코닝(coning)현상이 생긴다. 시일 평면에서 코닝 현상은 시일의 축방향 분리력(axial separtating force)과 경사 모우면트(tilting moment)에 커다란 영향을 주고 있는 것으로 알여졌다. 이들의 연구는 주로 경사진 시일평판에 시일근사치이논(seal approximation bhoryl)을 이용하여 1차원 비압축성에 관한 시월 성능을 해석하였다. 본 연구에서는 비압축성 유체의 점성이 온도에 의하여 변화를 일으키는 조건하에서 경사진 회전시일에 코닝이 발생되었을때 시일링 각극에서의 압력분포를 ㅈ차원인 경우에 대하여 수치적으로 해석을 하였다.

• Journal of computational fluids engineering
• /
• v.20 no.4
• /
• pp.102-108
• /
• 2015

Recently, There are many studies in progress in order to improve the efficiency of the gas turbine. Leakage in losses of the gas turbine account for the largest proportion. Seal is a sealing device to reduce the flow from leaking by the pressure difference inside the turbine. Compressor has another value according to the shape and pressure conditions in each stage. Thus, it is necessary to seal design for boundary conditions in order to minimize leakage. At the actual operating conditions of the compressor, numerical analysis of honeycomb labyrinth seal was performed in accordance with pressure, temperature, rotor speed for CFD. As a result, when the temperature increases, the leakage is decreased. Also, when the pressure increases linearly with increased leakage, and there was no effect of the rotation speed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.5
• /
• pp.623-628
• /
• 2006

Laser material processing is a very fast advancing technology for various industrial applications. because of many advantages. Its major advantage of less and controlled heat input has been exploited successfully for the very critical application of aluminium alloy welding. This study suggested the occurrence source of weld-defects and its solution methods in a welding of lithium ion battery by pulsed Nd:YAG laser. In experiment. battery case has changed over joint geometry from welding of side position to flat one. In the case of a electrolyte injection hole in order to seal it. welding is carried out after pressing Al ball. At this time. an eccentric degree. contact length and gap are worked as a major parameters. As improving the method of Al ball pressing. it was able to reduce an eccentricity. increase the contact length and decrease gap. As a results of a experiment. a sound weld bead shape and crack-free weld bead can be obtained.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.339-343
• /
• 2005

Laser material processing is a very fast growing technology for various industrial applications, because of many advantages. Its major advantage of less and controlled heat input has been exploited successfully for the very critical application of aluminium alloy welding. This study suggested the occurrence source of weld-defects and its solution methods in a welding of lithium ion battery by pulsed Nd:YAG laser. In experiment, battery case has changed over joint geometry from welding of side position to flat one. In case of a electrolyte injection hole in order to seal it, welding is carried out after pressing Al ball. At this time, an eccentric degree, contact length and gap are worked as a major parameters. As improving the method of Al ball pressing, it was able to reduce an eccentricity, increase the contact length and decrease gap. As a results of a experiment, a sound weld bead shape and crack-free weld bead can be obtained.

• Journal of the Korean Chemical Society
• /
• v.17 no.6
• /
• pp.450-454
• /
• 1973

The afterpolymerization and depolymerization of poly-${\varepsilon}$-caproamide in solid state have been studied under two different reaction conditions, nitrogen flow and sealed state. The degree of polymerization ($\bar{P}$) of nylon 6 increased with the increase in reaction time and temperature, and then reacted finally an equilibrium. In the presence of oxygen, $\bar{P}$ decreased by increasing the reaction time due to the oxidation reaction. Under certain reaction condition, the change of $\bar{P}$ for different initial degree of polymerization ($\bar{P}_0$) tendered toward unity in equilibrium.

• Journal of the Korean Magnetics Society
• /
• v.4 no.1
• /
• pp.56-61
• /
• 1994

Magnetic fluid is ferromagnetic material in liquid state, so the surface configuration of magnetic fluid affects the magnetic field, and vice versa. To analyze the devices with magnetic fluid, the magnetic field equations and hydrodynamic equation should be solved simultaneously. This paper presents the numerical algorithm to obtain the surface configuration of fluid under the influence of gravity, pressure and magnetic field without conventional sim¬plified assumption. The algorithm consists of nonlinear finite element method and ferro-hydrodynamics, such as Poisson equations and Bernoulli equations, respectively The simulated configurations of fluid are compared with experimental results, and the influence of the amount of fluid and pole piece shape on the seal capacities are analyzed.

• Korean Journal of Plant Resources
• /
• v.22 no.2
• /
• pp.136-144
• /
• 2009

Germination tests on 3 species that have potential for use as sprout vegetables, such as Coreopsis tinctoria, Saussurea pulchella, and Matricaria recutica, were conducted for 20 days under different temperatures of $15{\sim}30^{\circ}C$, and conditions of light and dark. C. tinctoria showed germination of 83% under $15^{\circ}C$ and dark condition after 4 days, S. pulchella 51.7% under $25^{\circ}C$ and light condition after 20 days, and M. recutica 90.3% under $25^{\circ}C$ and dark condition after 4 days. To investigate optimum plantlet size before greening treatment, seeds germinated were allowed to grow under darkness. The optimum growth of C. tinctoria was obtained under $30^{\circ}C$ after 5 days, S. pulchella under $25^{\circ}C$ after 6 days, and M. recutica under $20^{\circ}C$ after 6 days. Greening treatment resulted in diminished longitudinal growth, but C. tinctoria and S. pulchella showed more vigorous latitudinal growth. Days required before marketing as sprout vegetables were different according to species - Three days of greening was good for C. tinctoria, 2 for S. pulchella, no greening for M. recutica. Generally, tightly sealed containers for minimum water loss were recommended for storage of sprout vegetables after harvest. However, storage methods for each species were different depending on various factors like temperature of storage, presence of ventilation holes of storage packages and forms of marketing. More detailed research for above 3 species is proposed.