• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.4
• /
• pp.611-619
• /
• 2005

The aim of this study was to apply the quantitative light-induced fluorescence(QLF) and use of fluorescein-enhanced QLF method for quantitative assessment of early enamel demineralization in vitro, comparing effectiveness of light sources : argon laser, halogen lamp, light emitting diode (LED) and plasma arc lamp. Sixty extracted teeth were used, prepared by gentle pumicing and coating in an acid-resistant nail-varnish, except for an exposure to a demineralizing solution. Teeth were removed at regular intervals (24, 48 and 72hrs), air-dried and QLF image were taken. Mineral loss, as measured by difference of optical density, was recorded. For dyeenhanced QLF a 0.075% sodium fluorescein dye was applied after QLF examination and mineral loss was recorded. The following result were obtained : 1. Comparing with mean difference of optical density, plasma arc lamp was higher than other light sources in all group (p<0.05). 2. Comparing each group with mean difference of optical density, there was significant different using plasma are lamp and halogen lamp. 3. For use of dye-enhanced QLF, comparing with mean difference of optical density, plasma arc lamp were higher than other light sources in all group(p<0.05). 4. With this model dye-enhanced QLF compared with QLF in optical density, dye-enhanced QLF was higher than QLF in optical density. From the results presented in this paper, it was concluded that plasma light source was more effective compared with other light source for the detection and the quantification of early enamel caries.

• Korean journal of applied entomology
• /
• v.43 no.1
• /
• pp.71-79
• /
• 2004

Toxicities of 42 pesticides (13 acaricides, 13 insecticides, 13 fungicides and 3 adjuvants) commonly used to control rose insect, mite, and disease pests were evaluated to the two-spotted spider mite, Tetranychus urticae egg and adult, and its predator Phytoseiulus persimilis egg, nymph and adult at the recommended concentration. The effect of density suppression of T urticae by predatory mite and pesticide mixture on the rose in the greenhouses was also investigated. Among 13 acaricides tested, acequinocyl, bifenazate, fenbutatin oxide and spirodiclofen showed much less toxicity to P. persimilis than to T urticae. Among insecticides, acetamiprid, imidacloprid, spinosad, thiamethoxam and acetamiprid＋etofenprox showed low toxicity to P. persimilis. and T ruticae. Among 13 fungicides, azoxystrobin, kresoxim-methyl, myclobutanil, nuarimol, triadimefon, triflumizole and oxadixyl＋mancozeb had a negligible effect on P. persimilis and T. urticae. Among three adjuvants, cover and siloxane expressed high toxicity, while spreader showed very low toxicity to P. Persimilis. In the greenhouses experiments, the density of T urticae before treatment was 65.3 mites per leaf. However, their density after release about 30 predatory mites per rose abruptly decreased from 3.8 mites at 11th day to zero mite at 20th day. During survey periods, four treatments of fungicides (kresoxim-methyl, myclobutanil, nuarimol, triflumizole) for the control of Sphaerotheca pannosa and one treatment of insecticide (spinosad) the control of Frankliniella occidentalis were applied, and these treatments had no the pesticides had no effect on the predatory mite density. It may be suggested from these results that four acaricides, five insecticides, seven fungicides, and one adjuvant could be incorporated into the integrated T. urticae management system with P. persimilis on rose cultivation.

• Korean journal of applied entomology
• /
• v.31 no.4
• /
• pp.536-542
• /
• 1992

Control effects of carbofuran soil incorporation just before transplanting on the early occur-ring rice insect pests were studied in the rice field. Also, its residual effects on the brown planthopper (BPH) were studied by pot experiments. Carbofurn soil incorporation in late May was much more effective in controlling the early occurring rice insect pests such as small brown planthopper, green leafhopper and rice stem borer than carbofuran broadcasting or diazinon (3G) + BPMC (50% EC) treatment in mid June. Residual effects of carbofuran soil incorportaion on the female adult BPH decreased ca. a half one month after treatment. However, its residual effects on the next generation of the BPH lasted much longer; control effects on the next generation were above 90 and 70% on 37 and 46 days after treatment, respectively. From these results, it is thought that carbofuran soil incorporation just before rice transplanting can be a good control method to the early occurring rice insect pests and the brown planthopper immigrating during June. Also, it can suppress immigrating BPH popula¬tion moderately in early July.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.63.1-63.1
• /
• 2010

실리콘 박막 태양전지의 효율을 향상시키기 위해 밴드갭이 다른 흡수층을 적용한 tandem형 적층 태양전지를 이용하고 있다. 일반적으로 1.7eV이상의 밴드갭이 큰 비정질 실리콘을 이용하여 단파장의 빛을 흡수하고, 상대적으로 낮은 1.1eV 정도의 밴드갭을 갖는 미세결정 실리콘 층으로 장파장을 흡수하게 된다. 이렇게 연결된 tandem형 태양전지의 효율을 극대화하기 위해서는 각 태양전지에서 발생하는 전류 밀도를 일치시키는 것이 필요하다. 이를 위해 비정질 실리콘의 두께가 증가되는 경우가 있는데 이러한 경우 비정질 실리콘의 광열화 특성(Lihgt-induced degradation)으로 안정화 효율이 감소하게 된다. 따라서 비정질 실리콘 태양전지의 전류 밀도를 향상 시켜 두께를 최소화하는 것이 매우 중요하다. Tandem형 태양전지에서 비정질 실리콘 태양전지의 전류 밀도를 향상시키기 위해 두 개의 전지사이에 광 반사층을 적용하여 태양전지를 제조하게 된다. 이러한 경우 비정질 실리콘의 전류 밀도는 증가하지만, 광 반사 층의 장파장 흡수로 인하여 하부 태양전지의 전류 밀도 감소가 더 커지게 되어 전체 발생 전류 밀도는 오히려 감소하게 된다. 본 논문에서는 비정질 실리콘의 밴드갭을 제어하여 광 흡수 파장 영역 확대로 전류 밀도를 향상시키는 연구를 진행하였다. PECVD의 RF power 조건을 제어하여 1.75eV에서 1.67eV까지 밴드갭을 변화시켰다. 이와 같은 조건의 박막을 광 흡수층으로 갖는 p-i-n 구조의 비정질 실리콘 태양전지를 제작하였다. i층의 밴드갭이 감소됨에 따라 장파장 영역의 흡수가 확대되어 전류 밀도가 증가 하였지만, Voc의 감소가 컸다. 이는 i층의 밴드갭이 좁아짐에 따라 p층과의 불연속성이 커졌기 때문이다. 이러한 악영향을 줄이기 위해 p층과 i층 사이에 buffer층을 삽입하여 태양전지를 제작하였다. 이와 같은 최적의 buffer층 삽입을 통하여 불연속성을 줄임으로써 Voc의 상승효과를 확인하였다. 본 연구의 결과로 좁은 밴드갭을 갖는 광 흡수 층을 적용하여 전류 밀도를 향상시키고, 최적화된 buffer층 삽입으로 Voc를 향상시킴으로써 고효율의 비정질 실리콘 태양전지를 제작하였다. 이를 tandem형 태양전지에 적용할 경우 초기 효율뿐만 아니라 얇은 두께에서 제조할 수 있기 때문에 광열화 특성이 향상되어 안정화 효율의 증가를 가져올 수 있다.

• Analytical Science and Technology
• /
• v.18 no.1
• /
• pp.59-65
• /
• 2005

When the low level radioactivity sample is measured, it is required to have many samples. For increase of the sample volume, a scattering and absorbing probability of the emitted gamma-ray in the sample are to be increased. In order to correct the self-absorption effect, the counting efficiency must be calibrated according to a geometrical condition and sample density. But, it is impossible to determine efficiency for counting sample using standard source with the same geometrical condition and density. In this study, the measuring efficiencies were determined with various counting containers and densities. In order to compare the self-absorption effect with the sample density in the various sample container, the variation of the counting efficiency with the densities was investigated by adding NaI, which has high solubility and density. Also, they were compared with Monte Carlo simulation. The self-absorption effect was found to be significant in the low energy region below 0.5 MeV.

• The Korean Journal of Pesticide Science
• /
• v.4 no.2
• /
• pp.50-55
• /
• 2000

Occurrence, Injury aspects and control effect of some chemicals were investigated on tomato in plastic house from 1997 to 1998. Adults trapped by yellow sticky trap and sweeping net were increased from late May abruptly. Survey of population densities by yellow sticky trap was more clear than sweeping net. Damaged leaves were found out all the year round in continuous cropping fields and rate of damaged leaves was below 20% in early April and increased gradually up to 80% level after late May. Otherwise, damaged leaves were appeared from 6 weeks after transplanting in first growing field and then damaged leaves was 80% level in spring culture. In autumn culture, rate of damaged leaves was maintained 80% level from transplanting to harvesting date regardless of cultivation years. Number of adults was trapped from late May and peak was late June but mature larva was $6{\sim}8$ individuals in spring culture. In autumn culture, adult and larval densities was maintained high for 3 weeks after transplanting but begun to decrease from 4 weeks(early September). Chlorfenapyr EC, cyromazine WP and abamectin EC could suppress larval populations of Liriomyza trifolii effectively.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.1
• /
• pp.142-155
• /
• 1992

Numerical analysis is performed for the unsteady axisymmetric two dimensional phase change problem of freezing of water around a vertical tube. Heat conduction in the tube wall and solid phase, natural convection in liquid phase and volume expansion caused by density difference between solid and liquid phases are included in the numerical analysis. Existing correlation is used for estimating density-temperature relation of water, and the effect of volume expansion is reflected as fluid velocity at the interface and the free surface. As pure water has maximum density at 4.deg. C, it is found that there exists an initial temperature at which the flow direction reverses near the interface and by this effect the slope of interface becomes reversed depending on the initial temperature of water. By considering natural convection and solid-liquid density difference in the calculation, their effects on phase change process are studied and the effects of various parameters are also studied quantitatively.

• Journal of the Korean Geophysical Society
• /
• v.4 no.2
• /
• pp.95-102
• /
• 2001

As a basic study of characterizing fracture condition in bore hole, conventional geophysical well log data consisting of sonic, gamma-gamma and resistivity logs were compared with geological core log and acousic televiewer log in limestone geology. Discontinuities shown on the acoustic televiewer log and the core log show fairly good correlation. The conventional Geophysical log is also shown to bi effective in locating discontinities in limestone geology; sonic log shows the best result and resistivity shows the worst. Particularly, the combination method of density and sonic logs is shown to be the most effective in delineating discontinuities.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.1
• /
• pp.20-25
• /
• 1985

Studying of labor-saving feasibilities in transplanting work of paddy seedling, firstly the five transplanting densities were comparatively examined. The labor-savings were reached as 10, 20, 28% of the whole paddy works, and 28, 39, 61% of the transplanting works by reducing the density as 15, 11 and 8 hills per sq. meter, respectively. However the study on the crop yield and labor-productivity variations as affected by transplanting density of paddy rice was interpreted as the marginal feasibility of density reduction for labor-saving would be more or less than 11-12 hills per sq. meter.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.3 no.3
• /
• pp.152-162
• /
• 1991

A three-dimensional numerical model with free water surface was established to investigate flow characteristics of surface buoyant jets and river plumes. Turbulent shear stresses and turbulent buoyancy fluxes were expressed in terms of the eddy viscosities and diffusivities. Stable stratification effects due to density difference between discharged water and receiving ambient water were taken into with empirical formulae. Through a comparison of numerical results with published experimental data the validity of the model was shown and the optimal stratification functions was determined The three-dimensional spreading characteristics were examined and the effects of inlet densimetric Froude number, inlet aspect ratio and water surface elevation on the flow development were discussed.