• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.685-693
• /
• 2017

This study aims to effectively respond to urban local rainstorms by classifying the risk against flood damage for each use district. The risk classification is based on sensitivity analysis of the socio-economic damage caused by local rainstorms in Changwon city, Korea by a Fuzzy model using data, such as the districts that provide institutional bases for land use, land prices, which estimate the property values, and floor area ratios, which measures the density and areas of flood damage. The analysis result indicated that flood damage in five districts of Changwon (Masan happo-gu, Masan Hoewon-gu, Sungsan-gu, Euichang-gu, and Jinhae-gu) is highest in the order of commercial areas, residential areas, industrial areas, and forests, which was attributed to high land price and floor area ratio of commercial areas. On the other hand, specific analysis in Masan Hoewon-gu and Sungsan-gu was different from the previous result, indicating that the risk against flood damage may vary according to the districts depending on their local conditions. The analysis from this study can be applied to future urban planning and be used as a guideline to estimate the potential flood damage. Overall, this study is meaningful in that it proposes an effective management of land use as a new resolution to mitigate of urban flood damage within a broader perspective of climate change and urbanization.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.413-413
• /
• 2019

하천과 호수에서 남조류의 이상 과잉증식 문제(이하 녹조문제)는 담수생태계의 생물다양성을 감소시키며, 음용수의 이취미 원인물질을 발생시켜 물 이용에 장해가 된다. 또한 독소를 생산하는 유해남조류가 대량 증식할 경우에는 가축이나 인간의 건강에 치명적 해를 끼치기도 한다. 그 동안 국내에서 녹조문제는 댐 저수지와 하구호와 같은 정체수역에서 간헐적으로 문제를 일으켰으나, 4대강사업(2010-2011)으로 16개의 보가 설치된 이후 낙동강, 금강, 영산강 등 대하천에서도 광범위하게 발생되고 있어 중요한 사회적 환경적 이슈로 대두되었다. 한편, 대하천에 설치된 보 구간에서 빈번히 발생하는 녹조현상의 원인에 대해서는 전 지구적 기온상승에 따른 기후변화의 영향이라는 주장과 유역으로부터 영양염류의 과도한 유입, 가뭄에 따른 유량감소, 보 설치에 따른 체류시간 증가 등 다양한 의견이 제시되고 있으나, 대상 유역과 수체의 특성에 따라 녹조 발생의 원인이 상이하거나 또는 다양한 요인이 복합적으로 작용하기 때문에 보편적 해석(universal interpretation)이 어려운 것이 현실이다. 따라서 각 수계별, 보별 녹조현상에 대한 정확한 원인분석과 효과적인 대책 마련을 위해서는 집중된 실험자료와 데이터마이닝 기법에 근거로 한 보다 과학적이고 객관적인 접근이 이루어져야 한다. 본 연구에서는 2012년 보 설치 이후 남조류에 의한 녹조현상이 빈번히 발생하고 있는 낙동강 4개보(강정고령보, 달성보, 합천창녕보, 창녕함안보)를 대상으로 집중적인 현장조사와 실험분석을 수행하고, 수집된 기상, 수문, 수질, 조류 자료에 대해 통계분석과 다양한 데이터모델링 기법을 적용하여 보별 남조류 우점 환경조건과 이를 제어하기 위한 주요 조절변수를 규명하는데 있다. 연구대상 보 별 수질과 식물플랑크톤의 정성 및 정량 실험은 2017년 5월부터 2018년 11월까지 2년에 걸쳐 실시하였으며, 남조류 세포수 밀도와 환경요인과의 상관성 분석을 실시하고, 단계적 다중회귀모델(Step-wise Multiple Linear Regressions, SMLR), 랜덤포레스트(Random Forests, RF) 모델과 재귀적 변수 제거 기법(Recursive Feature Elimination using Random Forest, RFE-RF)을 이용한 변수중요도 평가, 의사결정나무(Decision Tree, DT), 주성분분석(Principal Component Analysis, PCA) 기법 등 다양한 모수적 및 비모수적 데이터마이닝 결과를 바탕으로 각 보별 남 조류 우점 환경요인을 종합적으로 해석하였다.

• The Korean Journal of Malacology
• /
• v.9 no.1
• /
• pp.1-16
• /
• 1993

한국의 담수에 광범위하게 서식하고 있으면서 역학적으로 중요한 역할을 하고 있는 두 종의 복족류 즉 쇠우렁이(Parafossarulus manchouricus)와 물달팽이(Radix auricularia coreana)의 소화기관 중에서 식도, 소화선 및 장에 대한 미세구조 관찰을 시도하였다. 이 부위들은 간흡충(간디스토마)과간질(소간디스토마)의 유생들이 그들의 생활사 중 거쳐가는 곳으로 알려진 소화관들이어서 이후 흡충류의 유충들이 위의 소화관에 주는 영향을 연구하는데 필요한 기초자료를 얻고자 수행된 것이었다. 관찰해 본 결과 다음과 같은 결론을 얻을 수 있었다. 식도의 상피조직은 두 종류에서 공히 원주세포와 원주섬모세포 및 점액분비 세포로 이루어져 있었다. 식도강상피 내에서도 어느 정도의 흡수와 소화가 이루어 지고 있음은 특이한 현상이라 하겠다. 소화선은 두 종에서 공히 복분지 관상선으로서 그 상피는 micovilli를 선강 또는 도관에 연한 유리표면에 가지고 있어 brush boredr을 이루고 있는 원주세포과 원주섬모세포로 구성되어 있었다. 이들 세포들의 내부 구조로 보아 소화세포와 배석세포로 구분할 수 있었다. 장의 상피는 원주세포와 원주섬모세포로 구성되어 있었으며 이들도 장강에 연한 유리표면에는 brush border를 이루고 있었다. 흡수와 분비기능이 활발한 것으로 사료된다. 전반적으로 보아 본 연구에서 관찰한 두 복족류의 소화관은 모든 부위에서 세포의 유리표면에 microvilli를 가지고 있어 물질의 흡수기능을 가지고 있음을 시사해주고 있었고, 이들 세포 중에는 때로 밀집한 cilia를 가지고 있어 소화관 내의 액체물질이나 이에 내포된 미세입자들의 유동을 도와주고 있음을 추측할 수 있었다.)은 결합조직으로 이루어진 근육질의 두꺼운 벽을 가지고 있었으며 내강은 돌출부위에 의해 4부분으로 갈라져 있었다. 내강에 연한 상피는 원주세포로 되어 있었다. 상음경(epiphallus)의 벽은 근섬유 다발은 벽의 외곽으로 갈수록 밀도가 높아졌다. 상부에 내강과 연결되는 함입구조(groove)를 가지며, 내강에 연한 상피는 섬모가 없는 원주세포로 이루어져 있었다. 음경(penis)은 근섬유가 산재된 두꺼운 벽을 가졌으며 상음경보다 굵은 원통형이었다. 내강은 많은 돌출부에 의해 복잡하게 나뉘어 있으며 상피세포는 원주 세포로 이루어져 있었고 섬모는 관찰되지 않았다. 내강 내의 분비물과 세포의 형태로 보아 내강상피세포는 분비기능을 가진 것으로 사료된다.술적 문제가 적절히 해결되는 경우 비활성 가스 제너레이터는 민수용으로는 대형 빌딩, 산림, 유조선 등의 화재에 매우 적절히 사용되어 질 수 있을 뿐 아니라 군사적으로도 군사작전 중 및 공군 기지의 화재 그리고 지하벙커에 설치되어 있는 고급 첨단 군사 장비 등의 화재 뿐 아니라 대간첩작전 등에 효과적으로 활용될 수 있을 것으로 판단된다.가 작으며, 본 연소관에 충전된 RDX/AP계 추진제의 경우 추진제의 습기투과에 의한 추진제 물성 변화는 미미한 것으로 나타났다.의 향상으로, 음성개선에 효과적이라고 사료되었으며, 이 방법이 편측 성대마비 환자의 효과적인 음성개선의 치료방법의 하나로 응용될 수 있으리라 생각된다..7%), 혈액투석, 식도부분절제술 및 위루술·위회장문합술을 시행한 경우가 각 1례(2.9%)씩이었다. 13) 심각한 합병증은 9례(26.5%)에서 보였는데 그중 식도협착증이 6례(17.6%), 급성신부전증 1례(2.9%), 종격동기흉과 폐염이 병발한 경우와 폐염이 각

• Elastomers and Composites
• /
• v.38 no.3
• /
• pp.213-226
• /
• 2003

The cure and rheological behavior of diglycidyl ether of bisphenol F/nadic methyl anhydride resin system with the kinds of imidazole were studied using a differential scanning calorimeter (DSC) and a rotational rheometer. The isothermal traces were employed to analyze cure reaction. The DGEBF/ anhydride conversion profiles showed autocatalyzed reaction characterized by maximum conversion rate at $20{\sim}40 %$ of the reaction. The rate constants ($k_1,\;k_2$) showed temperature dependance, but reaction order did not. The reaction order (m+n) was calculated to be close to 3. There are two reaction mechanisms with the kinds oi catalyst. The gel time was determined by using G'-G" crossover method, and the activation energy was obtained from this results. From measurement of rheological properties it was found that the logarithmic 1:elation time of fused silica filled DBEBF epoxy compounds linearly increased with the content of filler and decreased with temperature. The highly filled epoxy compounds showed typical pseudoplastic behavior, and the viscosity of those decreased with increasing maximum packing ratio.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.343-348
• /
• 2003

Indium tin oxide (ITO) thin films (170 nm) were grown by DC magnetron sputtering deposition on Coming glass substrates without a post annealing. The electrical transport and optical properties of the films have been investigated as a function of deposition temperature $T_{s}$ (10$0^{\circ}C$$\leq$ $T_{s}$$\leq$35$0^{\circ}C$) and oxygen partial pressure $P_{o_{2}}$, (0 $P_{o_{2}}$ $\leq$ 10$^{-5}$ torr). Films were deposited from a high density (99% of theoretical density) ITO target (I $n_2$ $O_3$: Sn $O_2$= 90 wt% : 10 wt%) made of ITO nano powders. With an increase of $T_{s}$ the electrical resistivity p of ITO thin films was found to decrease, but the mobility $\mu$$_{H}$ was found to increase. The carrier density nu shows the maximum value of 6.6$\times$10$^{20}$ /㎤ at $T_{s}$ = 30$0^{\circ}C$. At fixed Is, with an increase of the oxygen partial pressure, $n_{H}$ and $\mu$$_{H}$ were found to decrease, but p was found to increase. The minimum resistivity and maximum mobility values of the ITO films were found to be 0.3 mΩ.cm and 39.3 $\textrm{cm}^2$/V.s, respectively. The visible transmittance of the ITO films was above 80%.. 80%..

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.4
• /
• pp.405-411
• /
• 1999

Growth responses and yields of cucumber, the populations of soil microorganisms, and the control value of nematodes were examined with six different treatments of chemical fertilizer, compost, microbial fertilizer(MF), and the combined applications of NPK + MF and compost. Cucumber, Eunseong Bakdadaki cultivar, was cultivated in the greenhouse. Higher plant height was appeared with treatments of the combined application of NPK + compost and NPK + MF compared to other treatments, especially at the early growth until 20th day after transplanting. Also, higher number of opened flowers showed with the combined treatments of NPK + compost and NPK + MF than those with others. The control value of nematodes at 60th day after transplanting with treatments of MF and NPK + MF was about 39.0% and 61.6%, respectively. The density of soil microorganisms was higher in order of actinomycetes, bacteria, and fungus. Their densities were not clearly different with treatments. Fruit yields of cucumber with treatments of NPK, compost, microbial fertilizer, and additions of compost and microbial fertilizer to NPk were higher, about 40 to 60%, than that with the control. The highest fruit yield was with NPK + MF and next highest fruit yield was with NPK + compost. It is assumed that the combined application of chemical fertilizers, compost, and microbial fertilizers would be increased the plant productivity.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.5
• /
• pp.405-411
• /
• 2007

This study was carried out to measure insoluble phosphorus fractions content fixed in different soil type and isolate a superior phosphate solublizing bacteria(PSB) producing free phosphate in citrus orchard soil. Distribution of insoluble phosphate fraction ordered Al-P>Ca-P>Fe-P in the investigated citrus orchards. Insoluble phosphate fraction such as Al-P, Ca-P, Fe-P were higher in volcanic ash than in non-volcanic ash soil. A PSB with high holo zone in PDA-P medium isolated from citrus orchard soil. This strain identificated by MIDI system as Bacillus sphaericus. The optimum growth of pH and temperature were at 4~5, $30^{\circ}C$, respectively. When Bacillus sphaericus cultured at $25^{\circ}C$, 150 rpm condition in LB broth medium included different phosphate. Bacillus sphaericus produced free phosphate in the culture broth medium from tricalcium-phosphate(207.0 ppm), aluminium phosphate(324.5 ppm) and hydroxyapatite(334.8 ppm) and Phosphatase activity of Bacillus sphaericus was higher at $35^{\circ}C$ culture condition than that of $25^{\circ}C$. Two type preparation inoculated Bacillus sphaericus made with carrier materials such as Bentonite, $CaCO_3$, Sodium alginate. Density of PSB in this preparation conserved at $10^5c.f.u.\;g^{-1}$ level during storage in different temperature condition for 7 month. It also showed that free phosphate produced at PDA-P medium.

• Journal of the Korean Regional Science Association
• /
• v.37 no.3
• /
• pp.3-18
• /
• 2021

The fourth Industrial Revolution is transforming the industrial structure of the region, and it is necessary to develop new industries and technologies that reflect regional characteristics. The purpose of this study is to measure the knowledge relatedness and technological complexity in Busan, Ulsan, and Gyeongnam, and to identify technologies with potential for regional industrial differentiation strategies. Using patent data from 2015 to 2019, co-occurrence matrices were derived from 652 IPC codes, and the knowledge relatedness density and technology complexity index were calculated. Network analysis was performed using the knowledge relatedness density. As a result of analysis, it was found that mechanical engineering occupied a large proportion, followed by chemistry and electrical engineering. As a result of applying the risk-benefit framework to derive technologies with the potential to differentiate local industries, the technological capabilities of low-risk-high-benefit were different. Among mechanical engineering, technologies such as engine, machine operation, and transportation were included in Busan. In Ulsan, environmental technology in chemical and materials, and heat treatment technology in mechanical engineering were technologies with low-risk and high-benefit capabilities. Gyeongnam showed competence in mechanical engineering, chemistry, and electrical engineering in some areas such as Gimhae, Yangsan, and Changwon. The results of this study are meaningful in that they identified technologies with potential for selecting and deriving strategic industries for regional growth based on latent knowledge in the region.

• Journal of Digital Convergence
• /
• v.19 no.9
• /
• pp.283-288
• /
• 2021

Due to the 4th Industrial Revolution and the Digital Revolution, many changes are being made in the manufacturing method and structure in the field of plastic arts and crafts. Therefore, in this study, we tried to present a new work method suitable for this era by effectively utilizing the digital technology called 3D printer. For this study, first of all, the theoretical background of 3D printing technology was understood, and prior studies on the use cases of 3D printing technology were summarized. Based on this, three types of craft molds were produced using a 3D printer. As a result of the study, there were characteristics that appear respectively depending on the thickness or overlapping of the craft molds using 3D printing technology. First, in the case of the thickness of the craft molds, the thinner the strength, the weaker the strength, but there was an advantage in that it was easier to take out the contents of the molds. However, it was determined that the thick craft molds was stable to contain the dense and heavy material. Second, in the case of overlapping of craft molds, the advantages of both thin and thick molds were obtained as a result of using a double-layered molds. However, there was a disadvantage that the surface of the contents taken out was not smooth, so that post-processing was necessary. In future research, I hope to deal with the material of the filament used in 3D printers.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.3
• /
• pp.268-275
• /
• 2021

The three factors that determine the strength of concrete are the strength of cement paste, aggregate and ITZ(Interfacial Transition Zone) between aggregate and cement paste. Out of these, the strength of ITZ is the most vulnerable. ITZ is formed in 10~50㎛, the ratio of calcium hydroxide is high, and CSH appears low ratio. A high calcium hydroxide ratio causes a decrease in the bond strength of ITZ. ITZ is due to further weak area. The problem of ITZ appears as a more disadvantageous factor when it used lightweight aggregate. The previous study of ITZ properties have measured interfacial toughness, identified influencing factors ITZ, and it progressed SEM and XRD analysis on cement matrix without using coarse aggregates. also it was identified microstructure using EMPA-BSE equipment. However, in previous studies, it is difficult to understand the microstructure and mechanical properties. Therefore, in this study, a method of measuring electrical resistance using EIS(Electrochemical Impedance Spectroscopy) measuring equipment was adopted to identify the ITZ between natural aggregate and lightweight aggregate, and it was tested the change of ITZ by surface coating of lightweight aggregate with ground granulated blast furnace slag. As a result, the compressive strength of natural aggregate and lightweight aggregate appear high strength of natural aggregate with high density, surface coating lightweight aggregate appear strength higher than natural aggregate. The electrical resistivity of ITZ according to the aggregate appeared difference.