• Title/Summary/Keyword: 밀도지수

Search Result 588, Processing Time 0.039 seconds

2속도 모형을 이용한 Draft 공정의 가시적 모의실험

  • 김지수;강태진
    • Proceedings of the Korean Fiber Society Conference
    • /
    • 1998.04a
    • /
    • pp.209-213
    • /
    • 1998
  • 방적공정중에서 섬유속의 선밀도 감소와 평행화도 증가를 위해서 행해지는 드래프트 공정은 섬유속의 선밀도를 감소시킴과 동시에 불균제도를 증가시키게 된다. 실제의 생산설비는 드래프트로 인해 발생되는 불균제를 최소화하기 위해 여러 가지 다양한 기구를 사용한다. 드래프트 공정에서의 불균제도 증가는 드래프트 공정의 조건에 따라 그 정도를 달리하게 되는데, 최적의 공정조건은 공급되는 섬유속의 특성에 따라 변화시켜주어야 한다.(중략)

  • PDF

Analysis of the Variability of Leaf Area Index Derived From NOAA-AVHRR Satellite Image Data for South Korea (NOAA-AVHRR 자료로부터 유도된 남한지역 LAI 변화 분석)

  • Kim, Gwang-Seob;Yim, Tae-Kyung
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2005.05b
    • /
    • pp.908-911
    • /
    • 2005
  • 지표와 대기사이에서 식물의 광합성 및 증발산 능력과 밀접하게 관련되어 있는 엽면적지수는 식생밀도를 나타낼때 사용되는 식생지수이다. 본 연구에서는 NOAA-AVHRR 자료를 사용한 엽면적지수를 사용하여 남한지역 엽면적지수의 시공간변화도와 주기성분석을 실시하였고 소양강댐유역, 안동댐유역과 주요 도시의 엽면적지수의 월별, 년별, 계절별 추세를 분석하였다. 추세분석결과 월추세 분석에서는 장기간의 뚜렷한 변동성을 나타내지는 않았지만 겨울과 봄 보다는 여름과 가을에 식생의 밀도가 더 높은 계절적인 요인에 많은 영향을 받는 것을 볼 수 있었다. 시간변화 분석결과 계절변화를 제외한 특별한 장기변동을 확인할 수 없었으며 엽면적지수의 공간 변화는 정규식생지수가 보여주는 지형이나 위도의 변화와 밀접한 관계를 가지는 변화양상을 보여주지 않았다. 이는 농지 및 삼림 등의 인위적 조성으로 인한 엽면적지수의 공간변화도 양상과 관계있다 하겠다.

  • PDF

Studies on Planning Method of Optimum Forest Road (최적임도배치계획(最適林道配置計劃)에 관(關)한 연구(硏究))

  • Cha, Du Song;Lee, Joon Woo
    • Journal of Korean Society of Forest Science
    • /
    • v.81 no.2
    • /
    • pp.139-145
    • /
    • 1992
  • A planning method of optimum forest road was tested in the compartment II of Kangweon National University Forests by using a digital terrain model under four evaluation factors, i. e., minimum road length, average skidding distance, exploitative index, and ratio of inaccessible points. The results of the study were as follows : 1. Optimum forest road design based on the minimum road length was shown as 6035.6m, 12.73m/ha, 279.9m, 1.43, and 15.7% for total road length, forest road density, average skidding distance, exploitative index, and ratio of inaccessible points, respectively. 2. Optimum forest road design based on the average skidding distance was shown as 7828.5m, 16.52m/ha, 198.4m, 1.31, and 4.0% for total road length, forest road density, average skidding distance, exploitative index, and ratio of inaccessible points, respectively. 3. Optimum forest road design based on the exploitative index was shown as 7410.6m, 15.64m/ha, 210.9m, 1.26, and 5.0% for total road length, forest road density, average skidding distance, exploitative index, and ratio of inaccessible points, respectively. 4. Optimum forest road design based on the ratio of inaccessible points was shown as 8307.1m, 17.53 m/ha, 184.9m, 1.29, and 2.5% for total road length, forest road density, average skidding distance, exploitative index, and ratio of inaccessible points, respectively.

  • PDF

Effects of Feed Moisture and Barrel Temperature on Physical and Pasting Properties of Cassava Starch Extrudate (수분주입량과 배럴온도에 따른 카사바 전분 압출성형물의 물리적 특성)

  • Serge, Edou Ondo;Gu, Bon-Jae;Kim, Yeon-Soo;Ryu, Gi-Hyung
    • Food Science and Preservation
    • /
    • v.18 no.3
    • /
    • pp.271-278
    • /
    • 2011
  • Considering the importance of cassava as food crops in humid tropics, the effect of feed moisture (20, 25%) and barrel temperature (110, $130^{\circ}C$) on physical properties (piece density, expansion, mechanical properties, color, water solubility index, water absorption index) and pasting properties of extruded cassava starch was investigated. The feed moisture used during extrusion processing had a significant effect on extrudates SME input, specific length and piece density at (p<0.05) while effect on cross-sectional expansion index, apparent elastic modulus and breaking strength in bending shown significantly at p<0.1. Furthermore, the interaction effect of feed moisture and barrel temperature gave a significantly affected the SME input and piece density (p<0.1), specific length (p<0.05) and on redness (p<0.01). The increase in water injection rate led to increase in piece density, apparent elastic modulus, breaking strength in bending, cold peak viscosity, breakdown and final viscosity and decrease in cross-sectional expansion index and specific length. It was found that the extrusion cooking process did not affect the value of color L, color b, water solubility index and water absorption index. Thus, the results of this study can be useful to some extent in developing extruded cassava starch as human and animal feeds.

Relationship of Body Fat Percent with Serum Lipid Level and Blood Pressure in Adults (Impedance Fat Meter로 측정한 체지방 비율과 혈청 지질치 및 혈압과의 관련성)

  • Lee, Seock-Whan;Hwang, Tae-Yoon;Kim, Chang-Yoon
    • Journal of Preventive Medicine and Public Health
    • /
    • v.28 no.4 s.51
    • /
    • pp.783-794
    • /
    • 1995
  • This study was conducted to clarify the relationship of body fat percent with serum lipid level and blood pressure in adults. The study subjects were 472 men and 189 women who visited Multiphasic Health Screening Center of Yeungnam University Hospital in Taegu from May 20 to September 30, 1994. The relationship of serum lipid and blood pressure with BMI, Katsura index, atherogenic index, which calculated from the health screening data and body fat percent measured by impedance fat meter(model SIF-819) were analyzed. Three groups were classified as Group I (men : body fat Percent $\geq$ 20, women : body fat percent $\geq$ 25), Group II (men : 15 $\leq$ body fat percent< 20, women : 20 $\leq$ body fat percent< 25), Group III(men : body fat percent < 15, women body fat percent <20). In this study, Group I accounted for 3.2% in men, 3.7% in women. Weight was significantly different among three groups in both sexes(p<0.01) and height was not significantly different among three groups. In men, serum total cholesterol, triglyceride, high density lipoprotein, low density lipoprotein, atherogenic index were significantly different(p<0.01). In women, serum total cholesterol and low density lipoprotein were significantly different(p<0.05) but there was no differences in triglyceride and high density lipoprotein among three groups. BMI and Katsura index were significantly different among three groups in both sexes(p<0.01). In men, body fat percent was positively correlated with weight, BMI, Katsura index, total cholesterol, triglyceride, low density lipoprotein, atherogenic index and systolic and diastolic blood pressures, and negatively correlated with high density lipoprotein. In women, body fat percent was positively correlated with age, height, weight, BMI, Katsura index, total cholesterol, triglyceride, low density lipoprotein and atherogenic index, and negatively correlated with high density lipoprotein. But there was no significant correlation between body fat percent and blood pressure in women. In multiple regression analysis for total cholesterol, fat percent, age and BMI were significant independent variables in men$(p<0.05,\;R^2=0.1286)$, and body fat percent and age in women$(p<0.05,\;R^2=0.3399)$. In case of LDL/HDL ratio, only BMI was a significant independent variable in menu$(p<0.01,\;R^2=0.0954)$, and body fat percent, age and BMI in women$(p<0.05,\;R^2=0.3164)$. In multiple regression analysis, age, low density lipoprotein and total cholesterol were significant independent variables on systolic blood pressure in men$(p<0.05,\;R^2=0.1297)$, age and total cholesterol in women$(p<0.05,\;R^2=0.1705)$. On diastolic blood pressure, only age was a significantly independent variable in men$(p<0.01,\;R^2=0.0972)$ and women$(p<0.01,\;R^2=0.1218)$. From the result of this study, it could concluded that body fat percent was significantly associated with other obesity indices and serum lipid, but had no significant association with blood pressure. To establish the relationship of body fat percent with blood pressure, further study which consider other variables that may have an effect on blood pressure should be performed.

  • PDF

The effect of dynamic stabilization exercise on unstable surface on thickness, density of back muscle (불안정 지지면에서의 동적 안정화 운동이 허리근육의 두께 및 밀도에 미치는 효과)

  • Han, Jong-Man;Park, Jea-Cheol;Kim, Keum-Sook;Kim, Hyun-Ae
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.16 no.3
    • /
    • pp.1957-1963
    • /
    • 2015
  • The purpose of this study is to examine the effect of dynamic stabilization exercise on unstable surface on thickness, muscle density and white area index (WAI) of transverse abdominis muscle and multifidus muscle. The subjects were 20s healthy adults and 27 people were measured for muscle thickness and muscle density, white area index after the experiment conducted during a six-week dynamic stabilization exercises divided into three groups, each in a different plane. The results showed a significant difference between the three groups (p <.05). Repeated measures analysis of variance (repeated ANOVA) results, transverse abdominis muscle and multifidus muscle thickness showed a significant difference between the groups in the time difference (p <.05), and between multifidus muscle density and white area index in the comparison between groups showed a significant difference (p <.05). In conclusion, showed significant difference in lumbar stabilization exercise part. These results seems to be utilized as a basis for future research on the lumbar stabilization exercise.

Analysis of the Applicability of Flood Risk Indices According to Flood Damage Types (홍수피해유형별 홍수 위험 지수 적용성 분석)

  • Kim, Myojeong;Kim, Gwangseob
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.38 no.1
    • /
    • pp.29-39
    • /
    • 2018
  • In this study, the applicabilities of flood risk indices using FVI from IPCC, PSR method from OECD, and DPSIR method from EEA, were analyzed. Normalized values of daily maximum rainfall, hourly maximum rainfall, ten minute maximum rainfall, annual precipitation, total days of heavy rainfall (more than 80mm/day), density of population, density of asset, DEM, road statistics, river maintenance ratio, reservoir capacity, supply ratio of water supply and sewerage, and pumping capacity were constructed from 2000 to 2015 for nationwide 113 watersheds, to estimate flood risk indices. The estimated indices were compared to 4 different types of flood damage such as the number of casualties, damage area, the amount of flood damage, and flood frequency. The relationships between flood indices and different flood damage types demonstrated that the flood index using the PSR method shows better results for the amount of flood damage, the number of casualties and damage area, and the flood index using the DPSIR method shows better results for flood frequency.