• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.3
• /
• pp.127-143
• /
• 2016

This study explored the variability in the accuracy of dasymetric population estimation with different grid cell sizes. Dasymetric population maps for Fulton County, Georgia in the US were generated from 30m to 420m at intervals of 30m using an automated intelligent dasymetric mapping technique, population data, and original and simulated land use and cover data. The accuracies of dasymetric population maps were evaluated using RMSE and adjusted RMSE statistics. Lumped fractal dimension values were calculated for the dasymetric population maps generated from resolutions of 30m to 420m using the triangular prism surface area (TPSA) method. The results show that a grid cell size of 210m or smaller is required to estimate population more accurately in terms of thematic accuracy, but a grid cell size of 30m is required to meet an acceptable spatial accuracy of dasymetric population estimation in the study area. The fractal analysis also indicates that a grid cell size of 120m is the optimal resolution for dasymetric population estimation in the study area.

• Journal of the Korean association of regional geographers
• /
• v.12 no.5
• /
• pp.614-630
• /
• 2006

Improved estimates of populations at risk for quick and effective response to natural and man-made disasters require spatial disaggregation of zonal population data because of the spatial mismatch problem in areal units between census and impact zones. This paper implements a dasymetric surface model to facilitate spatial disaggregation of the population of a census block group into populations associated with each constituent pixel and evaluates the performance of the surface-based spatial disaggregation model visually and statistically. The surface-based spatial disaggregation model employed geographic information systems (GIS) to enable dasymetric interpolation to be guided by satellite-derived land use and land cover data as additional information about the geographic distributor of population. In the spatial disaggregation, percent cover based empirical sampling and areal weighting techniques were used to objectively determine dasymetric weights for each grid cell. The dasymetric population surface for the Atlanta metropolitan area was generated by the surface-based spatial disaggregation model. The accuracy of the dasymetric population surface was tested on census counts using the root mean square error (RMSE) and an adjusted RMSE. The errors related to each census track and block group were also visualized by percent error maps. Results indicate that the dasymetric population surface provides high-precision estimates of populations as well as the detailed spatial distribution of population within census block groups. The results also demonstrate that the population surface largely tends to overestimate or underestimate population for both the rural and forested and the urban core areas.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.1
• /
• pp.83-91
• /
• 2012

Crown density, which is defined as the proportion of the forest floor concealed by tree crown, is important and useful information in various fields. Previous methods of measuring crown density have estimated crown density by interpreting aerial photographs or through a ground survey. These are time-consuming, labor-intensive, expensive and inconsistent approaches, as they involve a great deal of subjectivity and rely on the experience of the interpreter. In this study, the crown density of a forest in Korea was estimated using KOMPSAT-2 high-resolution satellite images. Using the image segmentation technique and stand information of the digital forest map, the forest area was divided into zones. The crown density for each segment was determined using the discriminant analysis method and the forest ratio method. The results showed that the accuracy of the discriminant analysis method was about 60%, while the accuracy of the forest ratio method was about 85%. The probability of extraction of candidate to update was verified by comparing the result with the digital forest map.

• Spatial Information Research
• /
• v.16 no.3
• /
• pp.373-383
• /
• 2008

LiDAR, unlike satellite imagery and aerial photographs, which provides irregularly distributed three-dimensional coordinates of ground surface, enables three-dimensional modeling. In this study, urban area was classified based on 3D information collected by LiDAR. Morphological and spatial properties are determined by the ratio of ground and non-ground point that are estimated with the number of ground reflected point data of LiDAR raw data. With this information, the residential and forest area could be classified in terms of height and density of trees. The intensity of the signal is distinguished by a statistical method, Jenk's Natural Break. Vegetative area (high or low density) and non-vegetative area (high or low density) are classified with reflective ratio of ground surface.

• Spatial Information Research
• /
• v.23 no.3
• /
• pp.23-33
• /
• 2015

Most data used for urban planning is aggregated by administrative district. Thus, a fundamental limit to analysing the changes of micro-geographical units exists. The object of this study is to estimate spatial development patterns based on characteristic city indicators. Gangnam, an area that was analysed, was divided into hexagon polygons. The development density and characteristic city indicators were input into each polygon. Moreover, this study analysed the influence of characteristic city indicators on development density using multinomial regression analysis. According to the results, distance between a polygon and both a road and a bus stop led to a decrease of development density in the polygon. However, distance between a polygon and a river led to an increase of development intensity. The method of this analysis and the results can be used to disaggregate the zonal data in the urban planing area.

• Journal of Korean Society of Forest Science
• /
• v.99 no.3
• /
• pp.391-396
• /
• 2010

To analyze the characteristics of canopy fuel in Pinus densiflora stand, which is essential to assess the crown fire hazard, allometric equations for estimation of crown fuel biomass were developed by subjectively categorized crown fuel component and crown bulk density was analyzed by available fuel component categories. Ten trees were destructively sampled at Pinus densiflora stand in Mt. Palgong in Daegu and their crown fuels were weighed separately for each fuel category by size classes and by living and dead. Regression equations that estimate crown fuel load by diameter at breast height(D) or additional total height(H) were derived. The adjusted coefficient of determination values were the highest (${R^2}_{adj}$=0.835-0.996) and standard error of estimate were the lowest (SEE=0.074-0.638) in the allometric equation lnWt=${\alpha}+{\beta}lnD+{\gamma}lnH$ in average. However, in needles and small branches categories, the differences in ${R^2}_{adj}$ and SEE between equations were not significant. Crown bulk density (CBD), which was calculated by crown fuel load divided by crown volume, was 0.067 kg/$m^3$ in average when only needles were considered as available crown fuel and 0.097 kg/$m^3$ when needles and branches (0-0.5 cm diameter) were considered. The increments of CBD of needles and small branches were little even when diameter at breast height increased.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.2B
• /
• pp.225-236
• /
• 2008

The techniques to calculate the probability precipitation for the design of hydrological projects can be determined by the point frequency analysis and the regional frequency analysis. Probability precipitation usually calculated by point frequency analysis using rainfall data that is observed in rainfall observatory which is situated in the basin. Therefore, Probability precipitation through point frequency analysis need observed rainfall data for enough periods. But, lacking precipitation data can be calculated to wrong parameters. Consequently, the regional frequency analysis can supplement the lacking precipitation data. Therefore, the regional frequency analysis has weaknesses compared to point frequency analysis because of suppositions about probability distributions. In this paper, rainfall observatory in Korea did grouping by cluster analysis using position of timely precipitation observatory and characteristic time rainfall. Discordancy and heterogeneity measures verified the grouping precipitation observatory by the cluster analysis. So, there divided rainfall observatory in Korea to 6 areas, and the regional frequency analysis applies index-flood techniques and L-moment techniques. Also, the probability precipitation was calculated by the regional frequency analysis using variable kernel density function. At the results, the regional frequency analysis of the variable kernel function can utilize for decision difficulty of suitable probability distribution in other methods.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.632-636
• /
• 2006

본 연구에서는 레이더 강수를 산정하는 기법을 비교.분석하고자 하였다. 레이더 강수산정기법의 비교는 레이더 반사도를 강우강도로 변환시키는 두가지 Z-R 관계식 산정방법을 기준으로 구분하여 수행하였다. Z-R 관계식 산정방법 중 첫번째는 지상강우계와 대응되는 레이더 격자 사이의 관계를 통해서 Z-R 관계식을 산출하여 레이더 강수를 산정하는 Least-Square Fitting 방법이고, 두번째 방법은 강우량계에서 관측된 강우량과 이에 근접한 영역에서 얻은 레이더 반사도 자료 각각의 확률밀도함수를 대응시켜 Z-R 관계식을 산출하는 WPMM(Window Probability Matching Method)을 적용하는 방법이다. 이 두 방법의 비교를 위해 2003년 6월에서 8월사이의 두 강우사상을 선택하여 Z-R 관계식을 산정하였으며, 산정된 Z-R 관계식으로 추정된 레이더 강수의 기상학적 검증을 통해 정성적.정량적으로 검토하였다. 한반도 전역에 대하여 산정된 레이더 추정강수를 검토한 결과 대체적으로 정확도 및 상관성 측면에서 WPMM 방법이 Least-Square Fitting 방법보다 정확한 것으로 나타났다. 또한, 도시 유역의 홍수예경보에 적합한 레이더 강수산정기법을 파악하고자 중랑천 유역의 레이더 강수를 수문학적으로 분석한 결과 WPMM 방법이 보다 유효한 것으로 검토되었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1406-1409
• /
• 2016

In this paper, we propose the heuristic signal grouping algorithm to estimate channel state value over full blind communication situation which means that there is no information about the modulation scheme and the channel state information between the transmitter and the receiver. Hereafter, using the constellation rotation method and the probability density function(pdf) the modulation scheme is determined to perform automatic modulation classification(AMC). Furthermore, the modulation type and a channel state value estimation capability is evaluated by comparing the proposed scheme with other conventional techniques from the simulation results in terms of the symbol error rate(SER) and the root mean square error (RMSE).

• Korean Journal of Environment and Ecology
• /
• v.25 no.1
• /
• pp.37-46
• /
• 2011

This study was written about the actual vegetation map by researchig current vegetation and on-site vegetation in the Deogyusan National Park. Current vegetation patterns were classified into 42 types according to correlation. And Quercus mongolica forest was 39.08% out of the total forest vegetation, and was dispersed the most widely. Next were Q. variabilis, Pinus densiflora, and Fraxinus mandshurica forests in order, so that the forests of Deogyusan are different from those of another national parks in that F. mandshurica forest is more widely dispersed. Forest vegetation of Deogyusan national park is broadly classified into three types: deciduous broad-leaved forest (Quercus forest and valley forest), coniferous forest(P. densiflora forest), and sub-alpine forest(Taxus cuspidata forest, Abies koreana, Rhododendron schlippenbachii shrub-forest, and prairie). Distribution of DBH of Q. mongolica and Q. variabillis had a higher frequency of young individuals and middle individuals, Q. serrata and Carpinus laxiflora had a higher frequency of young individuals, suggesting a continuous domination of these species over the other species for the time being. In contrast, F. mandshurica appeared limited to the valley of the sheet and a higher frequency of young individuals, suggesting a continuous domination of these species the development of a climax forest terrain. P. densiflora, Betula davurica, Cornus controversa, B. costata, A. koreana and T. cuspidata had a formality distribution, suggesting a continuous domination of these species over the other species for the time being.