• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.2
• /
• pp.125-138
• /
• 2001

고유진동수와 감쇠비는 지진이나 바람과 같은 동적 횡하중에 대해 구조물의 응답을 결정하는 주요한 특성이다. 본 연구는 지진하중에 대하여 목표응답 수준을 만족하는 구조물의 고유진동수와 감쇠비를 지정하고, 이 값을 실현하는 점탄성 감쇠기 파라미터의 처적분포를 구하는 설계방법을 제안한다. 여기서 지정할 고유진동수와 감쇠비는 목표응답 수준을 만족하는 여러 조합 중 설계조건과 원래 건물의 특성에 따라 결정될 수 있다. 제안한 설계방법은 점탄성 감쇠기의 감성 파라미터를 고유값의 기울기 정보를 바탕으로 분포시키므로 최적 위치와 크기에 대한 정보를 동시에 제공한다. 예제로서 평면 10층 전단 건물을 대상으로 최적설계를 수행하여 지정된 고유값을 실현하는 파라미터의 최적분포를 구하고 이를 통해 제안한 최적 설계의 특성을 확인하였다. 또한 더 나아가 3차원 일방향 비대칭 전단전물에 제안된 최적설계를 수행하여 그에 대한 적용가능성을 확인하였다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2006.11a
• /
• pp.279-282
• /
• 2006

본 논문은 시간지연을 갖는 이산 비선형 시스템에 대한 점근적 안정화 및 $H_{\infty}$ 성능을 갖는 퍼지 제어기 설계 방법을 제안한다. 시간지연을 갖는 이산 Takagi-Sugeno 퍼지 모델에 대한 점근적 안정화 및 $H_{\infty}$ 성능을 만족하는 제어기 존재조건을 선형행렬부등식으로 나타낸다. 리아프노프 함수에 조정파라미터를 도입함으로써 제어기 존재조건을 조정파라미터를 포함하는 선형행렬 부등식으로 나타낸다. 선형행렬부등식에 있는 조정 파라미터를 조정함으로써 시스템의 응답속도 및 오버슈트 등의 동적 성능을 개선시킬 수 있다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.2
• /
• pp.82-88
• /
• 2005

A compensation scheme for a class of linearly parameterized systems is presented. The compensator consists of a typical linearizing control and an adaptive observer with integration type update law, which is based on Speed Gradient (SG) algorithm.. Instead of the intermediate functions of the compensation schemes suggested by other researchers, the proposed compensator is designed with some design functions which guarantee the growth, convexity, attainability, and pseudo gradient conditions in the update law. The scheme achieves the asymptotic stability of the tracking error and the boundedness of the estimation errors. A numerical example is given to demonstrate the validity of the proposed design.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.10
• /
• pp.872-880
• /
• 2017

Usually, on/off control method is a way to control the thruster. Bang-Bang Control, PWM(Pulse Width Modulator) and PWPF(Pulse Width Pulse Frequency) are widely used as a typical way. When we are designing PWPF, the incorrectly designed parameters($K_m$, ${\tau}$, $U_{on}$, $U_{off}$, $U_m$) make trouble, such as the phase lag, the wasted fuel, the reduced system life. Therefore, the effect of parameters on the system performance should be analyzed before the proper parameters are selected. In this paper, we suggest the PWPF parameters design method by performing a static analysis, and analyze the interactive effects on design parameters by performing a dynamic analysis and simulation.

• Journal of Advanced Navigation Technology
• /
• v.20 no.4
• /
• pp.361-366
• /
• 2016

This paper presents an arbitrary impedance transformer with unequal split, based on S- to admittance parameter conversion. When compared even/ odd- mode analysis, the parameter conversion design method constitutes a simple design method to include phase delay information and arbitrary port impedances and asymmetrical configurations. To validate this design method, we designed a 50 to $12.5{\Omega}$ impedance transformer with a 3:1 unequal power split, at an operating frequency of 1 GHz. To implement the proposed impedance transformer, the low impedance transmission lines of calculated result are fabricated by the transmission line connected shunt open stub. Good experimental performances were obtained, in full agreement with simulated results.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.6 s.44
• /
• pp.1-8
• /
• 2006

Many researchers have been studied for the automatic chromosome karyotype classification and analysis. For the automatic classify the each chromosome which is the image in microscope, it is necessary to process the sub-procedure, ie. image pre-processing, implementing karyotype classifier. The image pre-processing proceeded the each chromosome separation, the noise exception and the feature parameter extraction. The extracted morphological feature parameter were the centromeric index(C.I.), the relative length ratio(R.L.), and the relative area ratio(R.A.). In this paper, the fuzzy classifier was implemented for the human chromosome karyotype classification. The extracted morphological feature parameter were used in the input parameter of fuzzy classifier. We studied about the selection of the membership function for the optimal fuzzy classifier in each chromosome groups.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.7
• /
• pp.807-815
• /
• 2004

This paper describes the design principle of a fuzzy PID controller with fixed parameters, proposes the simulified form of a fuzzy PID controller to increase the computational efficiency and analyzes stability of a proposed fuzzy PID controller. After a detailed stability analysis using ‘small gain theorem’, a simple and practical sufficient condition for the BIBO stability of the overall feedback control system is derived. The derived stability condition offers a calculation method to obtain parameters of a fuzzy PID controller from parameters of a stable PID controller. Finally several computer simulations are executed to confirm the effectiveness of the fuzzy PID controller with fixed parameters.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.61-64
• /
• 1999

기존의 CELP 보코더에서, 무성음에 대한 별도의 처리 없이 유성음과 동일하게 처리하였다. 유성음과 무성음은 발성모델측면에서 임펄스열과 랜덤 잡음으로 각각 다름에 도 불구하고 동일하게 처리함으로써 합성음에서 음질의 저하 및 계산량과 전송률 측면에서 손실을 가져왔다. 또, U/V(Unvoiced /voiced) 분류기를 사용하는 경우에는 U/V 분류기의 성능에 따라 합성음의 음질저하의 정도의 차이가 심하다. 본 논문에서는 에러율과 전처리 계산량을 쳐소로 할 수 있는 U/V 분류기를 사용하여 CELP 보코더에서 전송률을 감소시키는 방법을 제안한다. CELP 보코더에서는 스펙트럼 정보를 LPC 파라미터로 추출한 후 다시 전송형 파라미터인 LSP(Line Spectrum Frequency)로 변환한다 새로운 린/V 분류기는 이 LSP 파라미터를 이용한다. LSP 파라미터의 주파수영역 분포도와 간격정보를 이용하여 U/V를 결정하게 된다 제안한 방법을 5.3kbps ACELP에 적용하여 성능 평가를 실시하였다 실험결과 음질의 저하 없이 $5.6\%$ (280bps)의 전송률을 감소할 수 있었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.9
• /
• pp.1065-1072
• /
• 2012

In this paper, the method of design of the waveguide band-pass filter and limiter in radar system is proposed. First, we design a self-resonant iris, which can behave as a band-pass filter by mounting the PIN diode on the iris. When low power microwave is incident on the proposed element, the element behaves as a band-pass filter. Under a high power microwave condition, however, the element behaves as a limiter having wide band stop characteristics. The fabricated element has a pass band with -0.7 dB insertion loss at 10 GHz under the low power condition and isolation about 25 dB under the high power condition.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.2
• /
• pp.220-228
• /
• 2012

In this paper, we explained the design technique about Ka-band active limiter for protecting the receiver of a millimeter wave seeker. To implement low flat leakage power, we proposed the control circuit of active limiter to control limiter voltage with PRF(Pulse Repetition Frequency) signal and input power. This active limiter consisted of the conventional 2 stage passive limiter, a feedback circuit with a directional coupler, detector, non-inverting amplifier and over-current protection resistance. As the test result of the fabricated Ka-band limiter, it had 1 GHz bandwidth, 3.5 dB insertion loss at the small input power and -7.5 dBm flat leakage at the 4 W RF input power, respectively.