• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.91.1-91.1
• /
• 2011

고체산화물 연료전지(Solid Oxide Fuel Cell이하 SOFC)는 연료가 갖는 화학에너지를 연소과정 없이, 공기와 H2, CO, CH4와 같은 환원성 가스를 공급받아 $600{\sim}1000^{\circ}C$에서 전기화학적 반응을 통하여 직접 전기를 얻는 방식이다. SOFC는 $700^{\circ}C$ 이상의 고온에서 고체산화물이 연료와 공기가 반응하여 전기와 열을 동시에 생산하기 때문에 carnot cycle의 제한을 받지 않아 발전효율이 40% 이상으로 고효율이고, NOx 및 SOx를 배출하지 않아 무공해이며, moving parts가 없어 소음이 나지 않고, 건설과 증설이 지역이나 기후 조건에 제약 없이 용이하고, 다양한 용량이 가능하며, 고가의 백금 촉매를 사용하지 않으며, 수소, 석탄가스, 천연가스 등의 연료를 사용할 수 있는 장점이 있음, 또한 다향한 형태로 제작할 수 있으며 전해질이 고체에서 전해질 손실 및 보충에 문제가 없고 타 연료전지에 비해 개질기가 필요 없어 발전시스템이 간단하고 경량화가 가능하다. 전사법은 paste를 제작하여 전사용지에 Screen printing하여 건조 후 coating하는 방법으로 기존의 여러 coating 방법보다 제작이 용이하고 소재의 크기, 두께조절이 간편하며, 구성층의 표면조도나 굴곡에 대응이 용이한 방법이다. 본 실험에서는 paste 제조, 전사법을 이용하여 Anode, AFL, Electrolyte, CFL, Cathode전사지를 제작하고 이를 세라믹 평관형 지지체에 변수로 두께 조건별 Coating 한 후 $1400^{\circ}C$ 소결을 진행하여 SEM 분석으로 미세구조 관찰, 출력특성 및 Impedance을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1B
• /
• pp.15-20
• /
• 2012

In this paper, an algorithm that enhances the conventional directional CSMA/CA protocol in IEEE 802.15.3c is proposed under saturation environments. For the algorithm, a Markov chain model is presented and analyzed in no-ACK mode. The effects of directional antennas and the features of IEEE 802.15.3c MAC are considered in the model. The optimal sizes of contention window are derived from the numerical results. The numerical results show that the proposed directional CSMA/CA algorithm outperforms conventional one. The overall analysis is verified by simulation. The obtained results provide the criterion for selecting the optimal parameters and developing a MAC protocol that enhances the performance of mmWave WPANs.

• Food Science and Preservation
• /
• v.9 no.4
• /
• pp.425-428
• /
• 2002

Growth and pigment formation in Genus Monascus(M. pilosus and M purpureus) related 15 kinds of culture media(Lin medium, SP medium, YM medium, YE medium, GMIN medium, SMO medium, MY medium, GY medium, Nishikawa medium, sucrose medium, stock culture, Mizutani medium, modified Lin medium, Toya medium and rice medium) were investigated. Mizutani medium and Lin medium among 15 kinds of the culture media showed good growth for M. pilosus, M purpureus, fresh mycelium weight cultivated for 10 days at 30$^{\circ}C$ was each 24.5∼26.9 or 15.9∼17.2 g/100 mL. The culture media which showed higher content of pigment production in two fungi were Lin medium(OD: 1.2 ∼ 1.6 and Mizutani medium(OD: 0.8 ∼ 1.0) that showed higher in M. pilosus.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.4
• /
• pp.357-365
• /
• 2009

On the purpose to improve the milling efficiency as well as head-rice percentage after milling, an experiment to improve the removal ability of immature kernels in the immature brown rice separator (IBRS) was performed focused on varietal characteristics. The removal ability of immature grains by the IBRS was absolutely depending on kernel thickness of brown rice. The kernel thickness of the tested rice varieties distributed from 1.79 mm in Nonganbyeo to 2.16 mm in Daeribbyeo 1. Although there were some variation among rice varieties, it was roughly suggested that the suitable sieve-slit widths for good separation of the immature kernels were 1.9 mm for the varieties thicker than 2.08 mm in thickness, 1.8 mm for the varieties with 2.00-2.08 mm thickness, 1.7 mm for the varieties with 1.90-2.00 mm thickness, and 1.60-1.65 mm for the varieties thinner than 1.7 mm. It was found out that the higher the proportions of immature kernels in brown rice, the more conspicuous the improvement of milling efficiency as well as head rice rates by their removals. With increasing the sieve slit-widths beyond an optimum range, the losses of mature grains increased sharply. For effective separation of immature kernels, it was suggested that the optimum sieve-slit width should be set up depending on both of the kernel thickness and the critical loss limit of mature kernel.

• The Korean Journal of Pharmacology
• /
• v.26 no.2
• /
• pp.167-176
• /
• 1990

In the present study, we examined the effects of tamoxifen and LY117018 on various parameters for the estrogenic actions in order to understand the mechanism by which tamoxifen and LY117018 act on the uterine cells in 21-23 day old immature rats. Tamoxifen and LY117018 stimulated uterine weight and uterine contents of DNA, protein, and peroxidase activity in the absence of estradiol while inhibited above parameters in the presence of estradiol. Both cytosolic and nuclear progesterone receptors were increased by the treatment of tamoxifen and LY117018 as well as estradiol, but estradiol-induced increase in the progesterone receptors were reduced by the treatment of antiestrogens. These effects were enhanced by the multiple injections of antiestrogens. It seemed that tamoxifen was more agonistic than LY117018 but less antagonistic than LY117018, judged by their effects on various parameters for the estrogenic action. The affinities of estradiol, tamoxifen, and LY117018 for the estrogen receptor were $0.17{\pm}0.01nM(100%)$, $1.10{\pm}0.01nM(6.3%)$, and $0.23{\pm}0.01nM(77%)$, respectively. Furthermore, LY117018 was the competitive ligand for the estrogen receptor in dose-related manner but tamoxifen was not. Following estradiol treatment, nuclear estrogen receptor was sharply increased by 1 h, reaching the maximum by 16 h, while tamoxifen and LY117018 slightly increased nuclear estrogen receptor by 1 h and then decreased thereafter. It is therefore concluded that LY117018 is a competitive antagonist for the estrogen receptor with less estrogenic activity, compared to tamoxifen with low affinity to the estrogen receptor, and tamoxifen may act through other binding site than the estrogen receptor.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.29-38
• /
• 2009

Statement of problem: A casting connection technique is widely used for repair, correction and addition to base metal framework. However, a casting connection technique may increase the risk of failure in clinical situations when high stresses exist. Purpose: The purpose of this study was to investigate the mechanical retentive groove design comparatively to increase the joint strength by using the three-dimensional finite element analysis model of a 3-unit fixed partial denture. Material and methods: Ten finite element models were constructed. (Model A: One retentive groove, Model B: Two retentive grooves, Model C: Three retentive grooves, Model D: Four retentive grooves, Model E: One horizontal groove and two vertical grooves, Model F: Two horizontal grooves and one vertical groove, Model G: One groove with the enlarged dimension, Model H: Two grooves with the enlarged dimension, Model I: One groove with the increased height, Model J: One groove with the increased width of base). The vertical force was applied to the mesial and the distal fossa to the casting connection of mandibular first molar. Results: The main factors, affecting joint strength of casting connection were both the retention between the primary cast and the secondary cast and the thickness of the primary cast remaining after preparing retentive groove. The increase of retentive force, according to the numbers and the dimension of retentive groove had an effect on distributing stress. However, in some cases, the increase of retentive force resulted in the increase of stress by reducing thickness of the primary cast in the connection area. Conclusion: The design of retentive groove that limits number of retentive groove for metal thickness and increases the depth of retentive groove for retention is highly recommended.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.07a
• /
• pp.309-316
• /
• 2003

Generally, sesame are dried on the field after being harvested in Korea. Since harvesting season is rainy autumn and sesame drying is mainly affected sun and natural wind, it is difficult to dry sesame in time. Moreover, sesame threshing by hand is very laborious work. Therefore, tractor mounted sesame thresher which threshes sesame bundles fed in upside down and conveyed along threshing bar was developed to mechanize sesame threshing and to reduce labor cost in this research. the thresher was equipped with a threshing bar which beats sesame bundles and a three layer sieve which screens sesame. The results are summarized as follows ; 1 The sesame thresher was consisted of a hitting-stick, a feeding chain conveyor, a threshing bar, conveyor belt, and the three-layer shaking sieve. 2. In threshing test, prototype thresher showed maximum threshing ratio 98.5%, 98.7% at 14, 17 cpm beating rate respectively. 3. In screening test, prototype sieve showed maximum threshing ratio 97.2% at 12$^{\circ}$ of inclined angle and 220 cpm of sieve vibrating rate. 4. Prototype showed 98.7% of threshing ratio, 1.3% of threshing loss, 97.0% of screening ratio, 0.7% of screening loss on the rest condition of 15 sesame bundles/min of feeding rate, 14 cpm of beating rate, 220 cpm of sieve vibrating rate. 5. The working performance of prototype was 0.5hr/10a. It was 9.6 times more efficient than manual work. And, operation cost of prototype was saved by 45.9% compared to manual work.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.1
• /
• pp.131-135
• /
• 2007

Various Phellinus species (Hymenochaetaceae) including P. linteus, P. baumii, P. pini, and P. igniarius of domestic and foreign products, were examined by gas chromatography to validate their composition of crude polysaccharides. The crude polysaccharide fraction, which is known to be one of the physiologically active fractions, were prepared by a cold ethanol precipitation method and the yield of the crude polysaccharide fractions of P. linteus, P. baumii, P. pini, and P. igniarius were 15.0%, 5.1%, 6.3% and 5.7%, respectively. The total monosaccharide amount of the crude polysaccharide fraction of P. linteus was 148.713 mg/g (dry weight of mushroom) while those of P. baumii, P. pini and P. igniarius were 29.022 mg/g, 29.222 mg/g and 1.546 mg/g, respectively. Although the major monosaccharide of all Phellinus mushrooms was glucose, there were remarkable differences in the absolute quantity of each monosaccharide. P. linteus included plenty of monosaccharides except mannose and ribose in comparison with P. baumii and P. pini. The absolute quantities of monosaccharides of P. baumii and P. pini were nearly similar except arabinose. The total monosaccharides of P. igniarius were minimal, but the portions of galactose and mannose in P. igniarius were greater than in the other species.

• Journal of Applied Biological Chemistry
• /
• v.54 no.1
• /
• pp.26-32
• /
• 2011

To improve genetic transformation of Brassica napus winter cultivar 'Youngsan', factors influencing shoot regeneration and transformation from cotyledonary petioles were investigated. Shoot induction was enhanced in the combination of 0.5 mg/L NAA and 2~4 mg/L kinetin. Silver nitrate was essential for successful shoot regeneration, ranging from 5 to 9 mg/L. The addition of $GA_3$ promoted plant regeneration. Among the tested Agrobacterium strains, co-cultivation times, and antibiotic selection regimes, choice of appropriate Agrobacterium strain was the most critical factor for efficient transformation of B. napus cv. 'Youngsan'. The EHA105 succinamopine strain was the most efficient and the maximum transformation efficiency was 26.8%. Transgenic shoots were selected on 10 mg/L phosphinothricin (PPT) containing media. The transgenic plants expressing bar and gus genes were resistant for commercial herbicide "Basta" and stained with X-Gluc. Southern blot hybridization indicated that the presence of one to three gus gene copies per genome and inheritance of the gus gene into the $T_1$ generation.

• Analytical Science and Technology
• /
• v.30 no.6
• /
• pp.348-354
• /
• 2017

In this study, patterns of proteome expression were monitored and specifically expressed proteins in human milk were detected in collected human milk after 1 week, 3 weeks, and 6 weeks from delivery. A quantitative shotgun proteomic approach was used to identify human milk proteins and reveal their relative expression amounts. For each sample, two independent human milk samples from two mothers were pooled, and then three replicated shotgun proteomic analyses were carried out. Casein, which is a highly abundant protein in human milk, was removed, and then trypsin was treated to produce a digested peptide mixture. The peptides were loaded in the home-made reversed-phase C18 fused-silica capillary column, and then the eluted peptides were analyzed by using a linear ion-trap mass spectrometer. The relative quantitation of proteins was performed by the normalized spectral count method. For each sample, 81-109 non-redundant proteins were identified. The identified proteins consisted of glycoproteins, metabolic enzyme, and chaperon enzymes such as lactoferrin, carboxylic ester hydrolase, and clusterin. The comparative analysis for the 63 proteins, which were reproducibly identified in all three replications, revealed that 25 proteins were statically significant differentially expressed. Among the differentially expressed proteins, Ig lambda-7 chain C region and tenascin drastically decreased with the delivery time.