• Korean Journal of Construction Engineering and Management
• /
• v.23 no.4
• /
• pp.47-56
• /
• 2022

In a construction project, process planning is an important factor in determining the success or failure of a project. In particular, it is necessary to systematically establish a process plan in the early stage because the finishing work of an apartment house involves more interference than the foundation work or the frame work. First, in this study the problems of Tact process management were identified, Based on the data from the case project, conventional Tact process management and compositive Tact process management were compared and analyzed. Second, cost analysis was performed on applicable plastering work to suggest the necessity and direction of compositive Tact process management. Third, the appropriateness of manpower according to the number of construction households is analyzed through cost analysis. Through this, the validity and effectiveness of compositive Tact process management were verified based on the results derived from this study.

• Journal of architectural history
• /
• v.23 no.4
• /
• pp.47-56
• /
• 2014

Traditional wall is ground coat, twice plater, last plaster by such a process has made a wide variety of used materials and techniques are accordingly diverse. These traditional techniques handed down the traditional walls of the techniques, rather than coming to the lowered cut off at any moment from now when the technique is used, not knowing whether to be used. Repair and restore cultural property maintenance work, it is not only the outward form hiding inside it is a technique to keep the preservation of cultural assets can be called true. When viewed from the side walls of these conventional techniques to reveal changes in the traditional process by looking at the changes in technology with traditional techniques for cause shall be made in stock. This paper is from the late Joseon Japanese occupation of techniques ranging from traditional wall to reveal the change process to its current significance of cultural property repair method to be helped.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.1
• /
• pp.1187-1195
• /
• 2001

This paper presents a sweeping path planning algorithm for an autonomous smearing robot. An automatic planner generates a sweeping path pattern by proposed five basic procedures. This algorithm rocog-nizes obstacle on the architectural CAD draft and generates subgoals as tracking points which executes the area filling task based on heuristic approach. A sweeping path is planned by sequentially connecting the track-ing points in such a way that(1) the connected line segments should not be crossed, (2) the total tracking points should be as short as possible, and (3) the tracking line should not pass through the obstacle, Feasibility of the developed techniques has been demonstrated on a real architectural CAD draft.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.3
• /
• pp.8-17
• /
• 2002

In this study, it was tried to analyze not only total hydrocarbon but individual hydrocarbon components from C$_1$to C$\sub$6/ in exhaust gas using gas chromatography to seek the reason fur remarkable differences of smoke emission of diesel fuel, esterfied rice bran oil and blended fuel(esterfied rice bran oil 20vo1-% + diesel fuel 80vo1-%). Individual hydrocarbons(C$_1$ ∼C$\sub$6/) as well as total hydrocarbon of esterfied rice bran oil is reduced remarkably compared with diesel fuel. Although smoke emission of esterfied rice bran oil reduced remarkably compared with commercial diesel fuel, NOx emission of esterfied rice bran oil and blended fuel was increased slightly at high loads and speeds. And, it was tried to reduced NOx emission of them by exhaust gas recirculation(EGR) method. Simultaneous reduction of smoke and NOx emission was achieved with the combination of esterfied rice bran oil and EGR method in consequence.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.10a
• /
• pp.387-392
• /
• 1994

Recently, as the problems according to lack of skilled labour and superior construction materials were gathering strength, there were required the advent of a special materials in building construction division. As a view of the point, the cement-based Self leveling mortar was developed for improvements of the former problems. The Self leveling mortar has the all kinds of the properties as followed the premixed products in plant, self-smoofhing, non shrinkgae etc, accordingly the finishing of concrete floor don't need skilled labour. The purpose of this study is to establish the introduction of a finishing construction method for concrete floor and slab using the cement-based self leveling mortar. Presented is a study on the basic properties of fresh and hardened self leveling mortar. To this end, an actual floor's finishing construction using the cement-based self leveling mortar was conducted in approximately 1,800㎡ floor as to compare the flatness and levelness after finighing.

• Korean journal of applied entomology
• /
• v.49 no.2
• /
• pp.93-95
• /
• 2010

Rotylenchus arsenjevi are reported for the first time in Korea. The Korean species differs slightly by having a hemispherical lip region and a slightly shorter tail than the original description (c=38.2-68.7 vs 36-41). Male was founded firstly from Korea and described. Geocenamus adakensis were collected a second time from Korea at a different locality and habitat. The measurements were compared with original description and the firstly collected specimen in Korea.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.1
• /
• pp.71-78
• /
• 2008

In this paper, The voltage waveshapes and the lightning parameters such as peak voltage, rise time, decay time and steepness of the front wave were statistically anal zed from the lightning-induced voltages measured on subscriber telecommunication line by lightning. Induced voltage measurement system to measure and collect the lightning-induced voltages in several regions of Korea was developed and installed in several sites. The distributions of lightning-induced voltages for Tears, regions and seasons were analyzed.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.8
• /
• pp.38-45
• /
• 1999

The 2-trowel type concrete floor finishing robot can move in any direction by adjusting the posture or trowels without any wheels. Since the quality of the smoothed and polished concrete floor is determined by plastering speed, we need to control the velocity of the robot. However, we cannot use the typical motion control method because it is very difficult to measure the velocity of the robot, in contrast to the mobile robots with wheels. To overcome this difficulty, the following are studied in this paper: we found that the robot dynamics has the disturbance depending on its translational speed, and showed that there exists the saturated velocity of the robot which is set by the posture of the trowels, and obtained the relationship between the saturated velocity and the posture in the translation. The result enables us to control the motion of the robot only by adjusting the posture of trowels without measuring the velocity of the robot. Currently, we built the troweling robot and are experimenting its performance with the proposed motion control method.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.2
• /
• pp.15-22
• /
• 2002

Lately, our world is faced with very serious problems related to the increased air pollution of the exhaust emissions from automobiles. In particular, the exhaust emissions of diesel engines are recognized as a main cause which strongly influence environment. Lots of researchers have attempted to develop various alternative fuels to reduce these harmful emissions in diesel engine. The purpose of this investigation is to evaluate the possibility of esterfied rice bran oil for diesel fuel substitution in a naturally aspirated D. 1. diesel engine, and also find means to reduce smoke emissions in esterfied rice bran oil combustion. The smoke emission of esterfied rice bran oil is reduced remarkably in comparison with commercial gas oil, that is, it was reduced approximately 58.2% at 2500rpm. But, power, torque and brake specific energy consumption didn't have no large differences. It was concluded that esterfied rice bran oil can utilize effectively as an alternative and renew- able fuel fur diesel engine.

• The Science & Technology
• /
• v.6 no.9 s.52
• /
• pp.16-17
• /
• 1973

오늘날 전세계가 직면하고 있는 에너지 위기를 해결할 수 있는 열쇠로서 원자력발전은 크게 각광을 받고 있다. 뿐만아니라 불치의 병으로 알려져 있는 암의 조기발견 및 치료, 농작물의 품종개량, 미장합판의 표면처리, 플라스틱 및 섬유류의 품질개선등 각 분야에 걸쳐 원자력의 이용범위는 확대되어 가고 있다. 심지어는 최근 사학계의 지대한 관심을 모으고 있는 경주 155호 고분의 연대측정시에도 원자력방사성 탄소에 의한 연대측정법이 활용되었음은 특기할 만한 사실이 아닐 수 없다. 그렇다면 과연 우리나라에 있어서 원자력의 산업적 이용은 어느 단계에까지 와있는 것일까? 이에 본지에서는 공학, 농학, 의학등에 활용되고 있는 방사선의 산업적 이용을 살펴봄과 동시에 원자력 발전의 국내실정과 전망을 전문지식인들에게 알아보았다.