• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1710-1714
• /
• 2005

Micro Cellular Plastics create a sensation at polymer industrial for lowering product cost & overcoming a lowering of mechanical intensity. This research is surface quality research of MCPs product Through surface rough measurement. This experiment is carried out according to injection speed control with the surface rough & Product surface quality are searched

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.3
• /
• pp.168-171
• /
• 2003

Nano pattern structure is produced using the conventional injection molding and the MmSH method. Plastic parts using PC make used of the MmSH method is much better than the other about manufacture showed transcription of nano pattern. The conventional injection molding, transcription of plastic parts with nano pattern using HIPS showed better than PC. In the result, transcription of nano pattern improve when well liquidity and high temperature of mold surface.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.3
• /
• pp.223-226
• /
• 2004

Injection molding using plastic materials was expected to mass production of structure with nano pattern for low cost phase. The PDMS mold was produced easily and uniformly by using thermal embossing. Quartz master for embossing method was made using electron beam lithography it had 100-500 nm size of line and dot type. The PDMS mold was produced after a brief hardening process and the master removal. The results show that various patterns are successfully fabricated the nano scale.. The replicated mold would be useful a stamper fabrication for injection molding.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.10a
• /
• pp.247-248
• /
• 2001

부착성 규조류는 전복의 인공종묘생산시 초기유생의 먹이로 널리 사용되고 있다. 현재 전복 종묘생산은 각장이 7∼8 mm가 될 때까지 투명 플라스틱 파판에 부착하는 미세조류를 자연발생시켜 먹이로 사용하는 방법에 의존하고 있다 (Hahn, 1989). 전복유생은 파판에 부착하여 먹이를 먹기 시작하는 시기부터 각장이 약 3 mm가 되는 시기까지 부착성 규조류를 먹이로 성장하는데 자연발생적 부착규조는 성장함에 따라 체인을 형성하면서 고밀도로 부착시 탈락과 동시에 치패가 탈락되고, 전복치패의 성장속도에 비해 파판에 부착된 규조류의 성장속도가 느려 먹이부족 현상으로 인한 생존율이 감소되는 문제점을 가지고 있다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.48-49
• /
• 2000

최근 몇 년 동안 레이저는 품질과 신뢰성의 계속적인 향상으로 인하여 여러 산업 응용분야에서 폭넓게 사용되어 지고 있다. 재료가공에 있어서 레이저의 적용분야는 금속의 절단, 용접 및 드릴링, 세라믹의 스크라이빙, 플라스틱과 복합재료의 절단 및 여러 가지 재료의 마킹, 등을 포함한다. 이러한 가공 메카니즘은 레이저의 조사에 의하여 재료를 용융, 증발시키는 열적 메카니즘이다. 특히 요즘에는 자외선 영역의 조사와 높은 빔의 세기에 의해 다른 종류의 에너지 전달 메카니즘이 가능한 UV 영역의 엑사이머 레이저의 사용이 증가하고 있다.$^{(1)}$ 이러한 엑사이머 레이저가 기존의 다른 레이저에 비해서 갖는 이점은 다음과 같다. 첫째, 모든 금속이 엑사이머 레이저에 대해서는 높은 흡수율을 가지므로 레이저 에너지가 가공 에너지로 효율적으로 변환되기 때문에 얇은 표면층에서 완전히 흡수하게 된다. (중략)

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.55-59
• /
• 2005

Micro injection molding analysis for microneedle fabrication was performed in the present study. The dimensions of width and thickness for microneedle are 600um, 500um, respectively. A delivery system based on guidelines for traditional injection molding was designed for four-cavities molding system. To investigate the effects of processing conditions in the mirconeedle fabrication, injection molding analysis using commercial code was performed. It was shown that the total injection time has a significant effect on the fabrication of microneedles.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.436-441
• /
• 2005

In this study, precision injection molding analysis for BGA connector fabrication was performed. A BGA connector model with rectangular micro-holes were introduced to investigate the effect of mirco patterns on the injection molding process. Dual domain(2.5D) mesh and full 3D mesh for BGA connector model were prepared to perform precision injection molding analysis. To verify the Present analysis, experiments of injection molding were performed based on the results of the analysis. It was shown that the type of mesh has a significant effect on the flow pattern of BGA connector

• Journal of Soil and Groundwater Environment
• /
• v.24 no.3
• /
• pp.1-12
• /
• 2019

Plastics have become essential materials in human life for several decades. Meanwhile, the inadvertent spread of plastic debris from the use of many plastic products has raised global environmental concerns. The risk of microplastics in subsurface environment has received little attention because soil is considered to confine microplastics within the matrix. However, the concentration of microplastics in soil unavoidably increased as a result of an increase in plastic production and use. Based on lab experiments, several researches claimed that microplastics possibly penentrate soil layers. Recently, a few researches reported the occurrence of microplastics in groundwater. This study reviewed the recent reports of microplastic occurrences in soil and groundwater, and the modeling studies for simulating transport of microplastics. Additionally, the difficulties and limits in microplastics researches in soil and groundwater are discussed. Finally, several perspectives on microplastic studies in subsurface environment are suggested.

• Korean Journal of Ecology and Environment
• /
• v.52 no.1
• /
• pp.28-39
• /
• 2019

This study was conducted to elucidate microplastics detection of freshwater ecosystems in Geum river. Samples are collected at 6 points in freshwater, 5 points in fishes. Freshwater was sampled 100 L per each points and fish species were Opsariichthys uncirostris amurensis, Hemibarbus labeo, Pseudogobio esocinus, Zacco platypus, Micropterus salmoides and Cyprinus carpio. FTIR analyis was adopted to identify microplastic types. Extracted microplastics were PES (polyester), PE (polyethylene), PP (polypropylene), PET (polyethylene terephthalate), PVC(Polyvinyl chloride) in freshwater, and PES, PE, PP, PET, PVC in fishes. Our results were expected to be used basic research information for further study in microplastics of freshwater ecosystems.

• Food Science and Industry
• /
• v.54 no.1
• /
• pp.2-10
• /
• 2021

Microplastics with a size of less than 5 mm have emerged as an important environmental and food safety issue, as they have been detected not only in marine but also in terrestrial ecosystem and drinking water. Although many studies have been conducted on the exposure of microplastics and the effects on human health, the lack of standardized experimental methods for microplastics has been reviewed as a major problem. In order to overcome this, European countries such as the Netherlands and Germany are conducting a project to develop detection methods for microplastics as well as to establish the risk assessment methodologies for microplastics. Being the microplastics suggested to have a substantially potential risk on human health, reliable risk assessments should be conducted considering the various sources of microplastics, chemical pollutants and biological factors. In addition, international standards and regulations should be applied.