• Title/Summary/Keyword: 미세조직채취

Search Result 51, Processing Time 0.033 seconds

Relationship Between Microstructure and Electrical Resistivity of Sb-InSb-and Sn-Bi Eutectic Alloys (Sb-InSb및 Sn-Bi공정합금의 미세조직과 전기비저항)

  • Seok, Myeong-Jin;Choe, Gil-Hyeon;Lee, Dong-Cheol;Mun, In-Hyeong
    • Korean Journal of Materials Research
    • /
    • v.4 no.1
    • /
    • pp.97-106
    • /
    • 1994
  • The dependence of the electrical resistivity on the eutectic composition and growth rates was investigated in the unidirectionally solidified Sb-InSb and Sn-Bi eutectic alloy systems, which were generally classified into the groups of f-f and nf-f eutectic system. Sb-InSb alloys containing 26-34wt.% In and Sn-Bi alloys containing 53-65wt.%Bi were prepared in vacuum sealed in a silica tube, and then these were unidirectionally solidified. Electrical resistivity of the specimens prepared by cutting the crystal section in parallel with the transverse direction and by cutting in longitudinal direction was measured. As the growth rate increased, the Sb-InSb and Sn-Bi eutectic alloys showed that the resistivity of longitudinal to the growth direction was increased but that of transverse to the growth direction was decreased. In the case of Sb-InSb eutectic alloy, increas~ng the phase boundary area and decreasing the fiber directionallity caused to increase the $p \; \parallel$ , while increasing the phase boundary area increased the $p \; \\perp$ As expected, the eutectic microstructure could be analysed well in terms of electrical resistivity.

  • PDF

Immunohistochemical Staining

  • 박창수
    • Proceedings of the Korean Society of Veterinary Pathology Conference
    • /
    • 2002.11a
    • /
    • pp.38-50
    • /
    • 2002
  • 질병의 정확한 진단과 적절한 치료 그리고 이에 대한 연구를 위해서는 병소에서 채취한 검체의 형태학적 소견을 관찰하는 것이 중요하다. 이러한 형태학적 변화를 관찰하기 위해서, 연구자들은 생검 조직으로 제작한 헤마톡실린-에오신 염색표본을 이용하고 있으며, 필요한 경우에는 세포의 미세구조를 관찰하기 위하여 전자현미경 검색을 시행하고 있다. 그러나, 각종질환은 점차 세분화되고, 새로운 진단기준이 소개되고 있으며, 종양의 진단에 도움을 주는 종양표지자, 그리고, 예후를 판정할 수 있는 예후인자들이 알려지고 있어서, 통상적인 헤마톡실린-에오신 염색표본이나 전자현미경 검색만으로는 이러한 종합적인 정보를 얻기가 어렵다. (중략)

  • PDF

Ultrastructural Changes of the Rat Brain Stem under Restraint Stress (구속스트레스에 의한 백서 뇌세포의 미세구조 변화)

  • Baek, Seung-Ho;Lee, Dong-Sik;Chun, Yang-Hyun;Lee, Jin-Yong;Hong, Jung-Pyo
    • Journal of Oral Medicine and Pain
    • /
    • v.26 no.3
    • /
    • pp.173-180
    • /
    • 2001
  • 스트레스가 질병 및 동통과 밀접하게 관련되어 있다는 것은 주지의 사실이며, 정서적으로 중요한 구강안면영역에는 측두하악관절장애증, 구강작열감증후군 등의 다양한 스트레스성 질환이 존재하는데, 이들의 병리학적 기전에 대해서는 아직도 논란의 여지가 있다. 그리고 중추신경계인 뇌는 스트레스 반응 및 동통 신호의 전달과 조절 등에서 중요한 역할을 하는 부분이다. 이에 저자는 스트레스와 신경과의 병리적관계를 조직학적으로 밝히고자 구속스트레스하의 백서 뇌조직을 채취하여 전자현미경으로 세포변화를 관찰하였다. 생후 8주된 Sprague-Dawley계 웅성 백서 (322-367 g/bw)를 대조군으로 3마리, 실험군으로 15마리를 배정하였다. 실험군은 구속스트레스를 실험 전기간에 걸쳐 부여하였다. 모든 실험동물의 뇌간을 적출하여, 전자현미경으로 조직변화를 관찰하였으며, 그 결과는 다음과 같다. 1. 정상 대조군에서는 정상적인 형태의 수상돌기 및 세포체가 관찰되었다. 2. 구속스트레스군의 5일군과 7일군에서 작은 크기의 사립체가 다수 출현하였다. 3. 구속스트레스 3일군부터 핵주위의 공포화(vacuolization)로 핵과 세포질이 이개되었으며, 7일군에서는 이러한 핵주위의 변성이 현저하였다. 구속스트레스 부여 후 뇌세포의 미세구조를 관찰한 결과, 세포내 미세구조 및 세포간극의 변화가 있었던 것은 스트레스에 의해 신경세포가 변성될 수 있다는 것을 의미하는 것으로, 이는 스트레스와 관련된 구강안면동통 등의 질병 기전을 밝히는데 도움이 되리라 사료되며, 향후 이에 대한 추가적인 조직학적, 분자생물학적인 연구가 필요하리라 생각된다.

  • PDF

Integrity Assessment of Stationary Blade Ring for Nuclear Power Plant (원자력 발전소용 블레이드링 건전성 평가)

  • Park, Jung-Yong;Chung, Yong-Keun;Park, Jong-Jin;Kang, Yong-Ho
    • Proceedings of the KSME Conference
    • /
    • 2004.11a
    • /
    • pp.85-89
    • /
    • 2004
  • The inner side between HP stationary blades in #1 turbine of Nuclear Power Plant A is damaged by the FAC(flow assisted corrosion) which is exposed to moisture. For many years the inner side is repaired by welding the damaged part, however, FAC continues to deteriorate the original material of the welded blade ring. In this study, we have two stages to verify the integrity of stationary blade ring in nuclear power plant A. In the stage I, replication of blade ring is performed to survey the microstructure of blade ring. In the stage II, the stress analysis of blade ring is performed to verify the structural safety of blade ring. Throughout the two stages analysis of blade ring, the stationary blade ring had remained undamaged.

  • PDF

Garnet Zoning from the Devonian Littleton Formation, North-Central Massachusetts, USA (미국 메사추세츠 북중부의 데본기 리틀톤층에서 산출되는 석류석의 누대구조)

  • 김형수
    • Journal of the Mineralogical Society of Korea
    • /
    • v.14 no.1
    • /
    • pp.1-11
    • /
    • 2001
  • 미국 메사추세츠 북중부에 산출되는 데본기 리틀톤층(Littleton Formation)의 남정석-십자석-석류석대에서 채취한 석류석 반상변정의 화학적 누대구조는 여러 번의 성장 단계를 경험했음을 보여준다. 석류석 반상변정들은 비대칭적이고 불규칙적인 Mn, Mg, Ca의 누대구조를 보인다. 조직대 경계부에서 석류석 성분들은 단면선에 따라 그 형태가 다르게 나타나고, $X_{Mn}$ 과 Fe/(Fe+Mg)비의 역전 누대구조는 석류석내의 내부엽리의 발달과 밀접한 관계를 보여준다. 이런 관찰 사항들은 석류석 누대구조가 석류석을 형성/소모시키는 반응뿐만 아니라, 용해작용과 침전작용과 관련된 기존의 미세구조에 의해 변화되었음을 의미한다. 화학적 그리고 조직적 잘림구조의 관계 그리고 저자가 제안한 석류석 성장모델은 석류석 누대구조가 엽리의 발달 동안 전단 응력대에서 일어나는 선택적 용해작용과 압축 운동대에서 발생하는 침전작용에 의해 조절되었음을 지시한다.

  • PDF

Studies on Conservation and Metallographic Manufacturing Technique of Iron Mirror in the Korean Christian Museum at Soongsil University Collections (숭실대학교 한국기독교박물관 소장 철제거울의 보존과 금속조직분석을 통한 제작기법 연구)

  • Kim, Haena;Lee, Hyojin;Kim, Sooki
    • Journal of Conservation Science
    • /
    • v.28 no.3
    • /
    • pp.257-264
    • /
    • 2012
  • Ancient mirrors are generally made of bronze, and it is very rare to find cases of iron mirrors excavated domestically. In this study, the unidentified ferrous artifact was treated for conservation, and was identified as a mirror. In this process, the sample was taken and analyzed for microstructure, and the manufacturing technology was studied. Analysis involved optical microscope, micro-hardness tester, and SEM-EDS. As the result of analysis, iron mirror structure exist not almost non-metallic inclusions, and partially network cementite was observed. This appears to have been caused by reduced carbon content due to decarburizing the cast iron in the solid state mirror which was created by cast iron. The ledeburite structure of the casting has difficult to cut or polish because has great hardness by high carbon content. Thus, the cast iron mirror was decarburized at a temperature under $850^{\circ}C$ with CO or $CO_2$ blocked, which reduced the hardness of the iron mirror and made it possible to polish the mirror surface. This deformation of structure according to carbon content results from such manufacturing technology.

A Study on Iron-manufacture Method through Analysis of Ironware excavated from Byeokje, Goyang (고양 벽제 제철 유구 출토 철기의 분석을 통한 제철방법 연구)

  • Lim, Ju-Yeon;Kim, Soo-Ki
    • Journal of Conservation Science
    • /
    • v.28 no.4
    • /
    • pp.367-376
    • /
    • 2012
  • The ironware production technology is a measure to fathom the society's level of development in time. To understand iron-manufacure methods in the past, various investigations on the fine structures and additions of ironware remains and Iron ingot have been conducted in a way of natural science. This study metallurgically reclassifies remains excavated in iron-manufacture remains located in Beokje, Goyang, which are thought to be in time of Goryeo Dynasty, and draws an inference from the element analysis on the iron-manufacture and smelting technology. Iron ingot samples with a cast iron structure are divided into those with a white cast iron structure and those with a grey cast iron rich in P. The P content of grey cast iron appeared to be the result of adding a flux agent like lime, iron ingot and carbon steel iron ingot with a cast iron structure excavated in the area is regarded as pig iron which was made without a refining process. In this study it seems that two methods of making ironware were used in the area; one is the method of making ironware by pouring cast iron to the casting, and the other is the method of making carbon steel through the refinement of pig iron. It appears that highly even steel structure of carbon steel and a small amount of MnS inclusion are very similar with that of the modern steel to which Mn is artificially added. Nevertheless, these data alone cannot be used to determine the source of Mn in the carbon steel of the excavated from the iron-manufacture remains, which raises the need for further studies on the source and the possibility of carbon steel via the iron-manufacture process of cast iron.

WAP-EPO 유전자 도입 형질전환돼지의 계대번식시 유전자 전이효율에 관한 연구

  • 이연근;박진기;민관식;성환후;임기순;양병철;김광식;김진회;장원경
    • Proceedings of the KSAR Conference
    • /
    • 2001.03a
    • /
    • pp.14-14
    • /
    • 2001
  • 본 연구는 생명공학 관련 기술개발에 의하여 신소재 물질을 생산하고 사람에게 안전하고 생리활성이 높은 고가의 의료용 단백질 생산기술을 체계화하며 형질전환 가축을 이용한 유용물질 생산에 따른 산업화와 부가가치의 극대화에 그 목적이 있다. 유즙으로 사람의 빈혈치료제인 EPO(Erythropoietin)를 분비할 수 있는 형질전환돼지를 생산하기 위하여 WAP(Whey Acidic Protein) Promoter(2.6kb) 하류에 사람의 조혈촉진유전자(EPO: 2.6kb)를 연결시켜 미세주입용 재조합 벡터(WAP-EPO : 약 7.8kb)를 구축하였다. 구축된 재조합 벡터를 1세포기 수정란에 약 2ng/ul 농도로 미세주입한 다음 외과적 방법으로 이식하였다. 이식 후 분만 모돈으로부터 생산된 자돈의 꼬리조직을 이용 게놈DNA를 추출하고 PCR 검정을 한 결과, 유즙으로 사람의 빈혈치료제를 생산할 수 있는 유전자가 도입된 형질전환돼지 $\boxDr$새롬이$\boxUl$ (♂)를 확인하였다. 또한 이렇게 꼬리조직으로부터 확인된 새롬이의 혈액과 정액을 채취, 게놈 DNA를 추출하여 외래 유전자 삽입여부를 PCR 방법으로 검정한 결과 꼬리조직과 마찬가지로 혈액 및 정액에서도 외래유전자가 삽입되었음을 확인할 수 있었다. 이렇게 생산된 형질전환돼지 $\boxDr$새롬이$\boxUl$를 이용 계대번식을 통한 F$_1$ 산자의 생산과 유전자 전이율을 확인하기 위하여 $\boxDr$새롬이$\boxUl$정액을 이용한 인공수정을 실시하였다. 인공수정은 1999년 7월 1일부터 2000년 9월 8일 까지 총 78두의 모돈을 이용하였으며, 그 중 21두의 모돈이 분만하여 인공수정에 의한 분만율은 26.92%로 나타났다.(Table Omitted) Table 1에서와 같이 새롬이 정액을 이용한 인공수정에 의해 형질전환된 F$_1$ 자돈의 형질전환율은 17.98%로 나타났으며, 32두의 형질전환자돈 중 8두(암:4두, 수:4두)는 분만과 동시에 폐사하였거나 사육중 폐사하여 현재 24두(암:12두, 수:12두)가 생존하여 F$_1$ 간 교배계획에 의해 사육되고 있다. 이 중 암컷 4두는 현재 F$_2$ 자돈 생산과 함께 유즙내로 사람 빈혈치료제의 분비 유무를 검정중에 있으며, FISH 법에 의한 외래 유전자 삽입 검정을 확인 중에 있다.

  • PDF