• 한국정밀공학회지
• /
• 제22권9호
• /
• pp.20-26
• /
• 2005

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.229-230
• /
• 2006

Shape memory alloy, Nitinol is used for medical stent, artificial human joint, antenna of artificial satellite, fire door, temperature sensor...etc. It is important for some nitinol product high precision and clean surface. In this study, we experiment about deburring of edge and surface of nitinol work piece with micro electrolytic-deburring. We made an observation in case electric currents are $1A{\sim}4A$, above 5A and each machining times.

• 대한기계학회논문집A
• /
• 제37권3호
• /
• pp.313-318
• /
• 2013

전자기력을 이용한 자기연마 공정은 전통적 가공방식으로 버를 제거하기 힘든 비자성체의 소재 및 마이크로 형상의 가진 제품에 활용될 수 있는 새로운 정밀 디버링 방식이다. 그러나 이러한 자기연마법은 자기연마입자를 이용한 기계적 절삭력을 이용하고 있기 때문에 마이크로 단위의 구조물의 형상을 변형시킬 가능성이 높다. 따라서 본 연구에서는 탄소나노튜브-코발트 금속복합체를 이용한 전해-자기복합가공을 STS316 소재의 미세 그루브의 마이크로 디버링공정에 적용하고 그 특성을 분석하였다. 그 결과 자기연마공정을 적용한 공정에서는 공정 후 그루브에 생성된 버는 효율적으로 제거되었으나 그루브 끝단의 형상변화가 두드러지게 관찰되었다. 반면 전해-자기복합가공을 이용한 경우에는 재료제거율이 낮아 그루브 끝단의 형상변화 없이 디버링 공정이 진행됨을 확인하였다.

• 한국기계가공학회지
• /
• 제12권2호
• /
• pp.114-120
• /
• 2013

An EP(Electrolytic Polishing)-MAP(Magnetic Abrasive Polishing) hybrid process was applied to remove burr on the micro pattern. Micro pattern fabrication processes are combined with micro milling and EP-MAP hybrid process for deburring. Depending on the micro milling conditions which are applied, micro burrs are formed around the side and top of the pattern. The EP-MAP deburring is used to remove these burrs effectively. To optimize removal rate and form error in the EP-MAP hybrid process, a design of experiment was performed. The effect of deburring process and form error of micro pattern are evaluated via SEM images and the results of AFM.

• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.49-54
• /
• 2007

Electropolishing, the anodic dissolution process without contact with tools, is a surface treatment method to make a surface planarization using an electrochemical reaction with low current density. Nitinol is a metal alloy composed of Ni and Ti around 50% respectively which has shape memory effect. Nitinol can be put various applications which require purity and high pricision surface of products. The aim of this study is to investigate the characteristic of electropolishing effect for nitinol workpieces. In order to analyze the characteristics of electropolishing effect, surface roughness and micro-burr size were measured in terms of machining conditions such as current density, machining time and electrode gap. The tendencies about improvement of surface roughness and deburring effect by electropolishing for nitinol workpieces were determined.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.100-104
• /
• 1996

This paper describes the characteristics of micro-burr formation in the cross hatch and deburring in honed surfaces. Two types of micro-burrs formed in the cross hatch were defined as upper edge burr (type A) and side edge burr (type B). The size of micro-burrs were measured for the honed surfaces of several cross hatch angle. Deburring mechanism and system using magneto-electrolytic process including the abrasive pad for mechanic deburring effects together were introduced. Deburring experiments and analysis were carried out to confirm the effectiveness of the deburring process.