• Progress in Medical Physics
• /
• v.5 no.1
• /
• pp.75-85
• /
• 1994

As we enter the 2000s, there are four nuclear power units of the pressurized heavy water reactor-type in the commercial operation at the Wolsung Nuclear Power Plant(NPP) site where a larger amount of tritium ($\^$3/H) is released inevitably to the site environment. This radioctive nuclide is easily distributed throghout our environment because of its ubiquitous form as tritiated water (HTO) and its persistence in the environment. Tritum has certain characterisitics that present unique challenges for beta radiation dosimety and health risk assesment. In this paper, therefore, a variety of matters on tritium are considered and reviewed in terms of its characteristics and sources, metabolism and dosimetry, microdosimetry, radiobiology, risk assessment, and transport and cycling in the environment, etc.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2005.05a
• /
• pp.218-222
• /
• 2005

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2019.10a
• /
• pp.168-168
• /
• 2019

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.743-748
• /
• 2012

This study presents the effects of micro-geometries on the swimming behavior of Pseudomonas aeruginosa. First, we have measured parameters of single-cell motility including cell speed, run duration time, and tumble angle under two dimensional space. The results are used to calculate motility coefficients in the width of microchannels ranging from 10 to $100{\mu}m$. Since the single-cell motility parameters measured depend on the interaction of flagella with the microchannel wall, the duration time of the running cell in restricted geometries is distinctively different. Therefore, the motility of bacteria is decreased by restricted geometries. This study suggests that microfluidic approach is useful tool for the analysis of bacterial motility under the restricted space and rapid analytical tool.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.422-422
• /
• 2021

현대사회에서 플라스틱의 요구량은 꾸준히 증가하고 있으며 이에따라 생산량 역시 맞춰 증가하고 있다. 이에 따라 전세계적으로 플라스틱으로 인해 발생하는 폐기물의 양 역시 증가하고 있으며 이로 인해 플라스틱 재질의 폐기물이 많아지고 있다. 이 중 가장 문제가 되는 폐기물이 바로 미세플라스틱이다. 미세플라스틱은 1㎛ ~ 5mm 미만의 플라스틱으로 그 물리 화학적인 특성으로 인해 회수가 어려우며 외부 환경에 잔류시 독성을 유발할 수 있다. 플라스틱의 약한강도와 열악한 내열성 그리고 유기용매에 취약하다는 단점을 보완하기 위해 첨가하는 화학물질로 인해 내분비계교란물질을 발생시켜 생명체의 내분비계를 교란시켜 최종적으로 성기능장애를 유발한다. 또한 미세플라스틱의 표면은 유기염류성 살충제와 같은 잔류성오염물질(POPs persistent organic pollutants)사이의 흡착성이 크기 때문에 미세플라스틱은 POPs 농도를 주변보다 최대 백만배 높게 만들 수 있다. 미세플라스틱의 분석은 표준화된 방식이 없어서 제각각이지만 대체로 미세플라스틱 표면에 응집된 유기물을 처리하는 전처리, 미세플라스틱의 농도를 분석하는 정량분석, 그리고 미세플라스틱의 성분을 분석하는 정성분석의 과정을 거쳐서 진행된다. 이러한 미세플라스틱의 분석법을 기반으로 하수처리장에 유입되는 하수의 미세플라스틱 분석방법을 제안하면 다음과 같다. 우선 유입수로부터 미세플라스틱을 따로 분리하기 위해 체거름을 진행했다. 이후 유입하수의 성상에 맞는 적정 전처리 방법을 알아내기 위해 유기물을 제거하기 위한 산화방식으롷서 과산화수소수, 80℃의 과산화수소수, 그리고 펜톤산화의 서로 다른 3가지 방식을 사용했다. 이후 이어지는 정량분석과 정성분석결과를 비교하여 유입하수에 가장 최적인 미세플라스틱 측정방법을 알아보고자 한다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.04a
• /
• pp.35-36
• /
• 2002

대기중에 존재하는 가스상ㆍ입자상 오염물질은 그 형태와 발생원, 함유물질 등이 매우 다양하며, 특히 산성가스와 에어로졸은 스모그 현상의 원인물질로서 수명단축과 가시도(Visibility) 감소의 원인으로 작용하여 건강에 직ㆍ간접적인 피해를 주고있어 대기질 관리의 주요 대상이 되고 있다. 미세입자(PM$_{2.5}$)는 시정장애에 영향을 미치고(Chow et al., 1993; Conner et al., 1991), PM$_{10}$보다도 호흡기 계통의 사망률에 더 큰 영향을 미친다고 보고되고 있다(Reichhardt, 1995). (중략)략)

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.6
• /
• pp.103-114
• /
• 2019

Despite recent projects to create urban forests to reduce the levels of particulate matter, objective evaluation criteria for selecting suitable sites for the projects have not been provided. The purposes of this study are to identify assessment items for the evaluation of available spaces for urban forests for the reduction of particulate matter and to analyze the relative importance of the items using the Analytic Hierarchy Process (AHP). We identified a total of 19 items in five categories through a literature review and a panel discussion. A total of 29 responses were collected from surveys given to experts, and an AHP analysis was conducted on the results. As a result, 'locational characteristics' (0.355) received the highest weighted value among the five categories, followed by 'planting type of existing green space' (0.184), 'weather conditions' (0.183), 'physical characteristics' (0.15), and 'human social environment' (0.128). In addition, among all the assessment items, 'proximity of source apportionment of particulate matter' (0.143) had higher weighted value while 'plantation of existing green space' (0.024) had the lowest weighted value. This study will present objective criteria and directions in the selecting of available spaces to create urban forests for the reduction of particulate matter.

• Economic and Environmental Geology
• /
• v.42 no.3
• /
• pp.261-272
• /
• 2009

An experimental study of the accelerated weathering was performed to investigate the variations of physicomechanical properties of deteriorated rocks due to freeze-thaw weathering for the Jurassic granite specimens from Wonju, Gangwon-do. Each complete cycle of freeze and thaw was lasted 24 hours, comprising 2 hours saturating in vacuum chamber, 8 hours freezing at -20$\pm1^{\circ}C$ and 14 hours thawing at room temperature. Freeze-thaw cycles were implemented with measuring the index physical properties as well as geometries of microfractures. The seismic velocity was found to decrease with increasing freeze-thaw cycles. On the other hand, absorption tends to increase with freeze-thaw cycles. In the end, it was concluded that variations of the index properties of deteriorated specimen depend on its initial properties and flaws in rock. The size and density of the traces of the microfracture on slab specimen were changed continuously with increasing freeze-thaw weathering. The results obtained in this study show that the box fractal dimension($D_B$) has the strong capability of quantifying the combined effect of size and density of the microfractures.

• Economic and Environmental Geology
• /
• v.31 no.4
• /
• pp.291-296
• /
• 1998

Pedogenic hematite is a well known agent for sink of pollutants and nutrients and for aggregation of particles in soils. Changes in physical and chemical properties of two sandy loam soils (Anahuac and Crowley soils) from the Southern Coastal Plain, the United States of America, were tested after adding finely ground crystalline hematite prepared for drilling fluid weighting material. There was an increase in hydraulic conductivity (HC) of the soils with addition of up to 3% by weight of hematite but a decrease in HC with addition of more hematite. The aggregate stability (AS) of the soils was not affected by adding hematite. Anahuac soil with higher content of organic matter and lower sodium adsorption ratio (SAR) had higher values of HC and AS than Crowley soil. Adding hematite also resulted in a slight increase in zinc (Zn) adsorption by the soils, but had no influence on the adsorption of phosphate.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.2
• /
• pp.83-88
• /
• 2019

BACKGROUND: In recent years, studies on microplastics have focused on their decomposition in the ocean. However, no studies have been reported on the interaction between microplastics and metal ions in aqueous solutions. Therefore, this study was conducted to evaluate the adsorption capacity of cadmium(Cd) by polypropylene (PP) in aqueous solution. METHODS AND RESULTS: Cadmium adsorption characteristics of PP in aqueous solution were evaluated through various conditions including initial Cd concentration(1.25-25 mg/L), contact time(0.5-24 h), initial pH(2-6) and temperature($20-50^{\circ}C$). Cadmium adsorption fit on PP was well described by Freundlich isotherm model with adsorption capacity(K) of 0.028. The adsorption amount of Cd by PP increased with increasing contact time, indicating that adsorption of PP by Cd was dominantly influenced by contact time. Especially, the removal efficiency of Cd by PP was highest at high temperature. However, the surface functional groups of PP before and after adsorption of Cd were similar, suggesting that adsorption of Cd by PP is not related to surface functional groups. CONCLUSION: Our study suggests that PP affects the behavior of Cd in aqueous solution. However, in order to clarify the specific relationship between microplastics and metal ions, mechanism research should be carried out.