• 토지주택연구
• /
• 제1권1호
• /
• pp.35-42
• /
• 2010

하수도관 정비사업 및 정부의 4대강 사업에서 발생되는 준설모래는 대부분 투기 및 매립에 의존하여 처리되고 있다. 이는 준설모래를 적절히 이용하는 관련 재활용 기술의 부족과 기존의 준설모래 생산시스템에서 생산된 준설모래의 높은 흡수율과 미립분 함유량에서 비롯된다. 따라서 본 연구에서는 기존의 준설모래 생산시스템의 문제점을 보완한 최적의 세척선별시스템을 통해, 준설모래 품질개선 성능과 세척선별시스템의 미립분과 유기이물질 제거 성능을 알아보기 위한 연구의 일환으로서, 처리된 준설모래의 기초물성을 평가한 결과, 세척선별시스템을 통해 생산된 준설모래가 흡수율, 0.08 mm체 통과량, 점토덩어리량, 유기이물질 함유량에서 큰 폭의 품질개선효과를 나타냈으며, 본 연구에서 목표로 하는 품질기준인 KS F 2573(콘크리트용 순환골재)과 KS F 2526(콘크리트용 골재) 기준에 모두 만족하는 것으로 나타나 향후 콘크리트용 골재로서의 활용가능성을 확인할 수 있었다.

• 한국세라믹학회지
• /
• 제40권1호
• /
• pp.62-68
• /
• 2003

졸-겔법으로 보자력 제어에 뛰어난 첨가제인 Co와 Ti을 첨가한 Ba-ferrite 미립자를 합성하였다. 졸-겔 반응시, 반응 시간이 90분에서 120분 이내에서 온도, pH 및 점도의 변화가 없고, aging 시간에 따라 점도가 안정한 상태치 졸을 얻을 수 있었다. 이 졸을 건조 및 열처리 후, Differential Thermal Analysis(DTA)와 X-Ray Diffractometer(XRD)를 통해 Ba-ferrite 상이 약 $700^{\circ}C$부터 생성됨을 확인하였으며, 열처리 온도 증가에 의해 결정성이 좋아짐을 볼 수 있었다. Scanning Election Microscopy(SEM)로 표면형상을 관찰한 결과 열처리 온도가 증가함에 따라 입자크기가 증가하였으며, 비교적 균질한 입도 분포의 미립자를 얻을 수 있었다. 또한, Vibrating Sample Magnetometer(VSM)로 Co와 Ti의 첨가량에 따른 자기적 특성을 관찰하였으며, 포화자화(M$_{s}$ )값은 첨가량에 관계없이 변화가 없었으나, 보자력(H$_{c}$)값은 첨가량에 따라 크게 변화하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술.기술논문발표회
• /
• pp.71-74
• /
• 2004

Recently, with the wide shortage of natural sand resources, it has been increasingly used the crushed sand. rushed sand is made by the process of crushing the rocks artificially, which has different particle properties compared with that of natural sand. Because such different panicle properties of crushed sand results in an undesirable effects of concrete. improvement technology for crushed sand particle properties like grain shape and fine particle needed during the manufacturing process. In this paper, improvement technology of grain shape and fine particle is reported. According to test results, adequate investment for manufacturing facilities like impact crusher and abrasion test machine is required to meet the advanced grain shape and grading of crushed sand. Based on the investigation of test result, mixing of natural land and crushed sand with given proportion can achieve the improvement of grain shape. For improving excessive fine panicle contents. current manufacturing system also can enhance the existing technology for fine particle without additional investment. It can be concluded that adequate investment and research can improve the quality of crushed sand.

• 폴리머
• /
• 제37권6호
• /
• pp.702-710
• /
• 2013

서방성방출을 위해 잘토프로펜을 함유한 미립구를 oil-in-water(O/W) 에멀젼용매 증발법을 이용하여 제조하였다. 제조온도, 교반속도, 초음파분쇄기의 강도, 약물농도, POX의 분자량과 농도, 유화제 농도 등의 제조조건에 따른 잘토프로펜의 방출거동을 평가하였다. 잘토프로펜을 함유한 POX 미립구의 물리화학적 성질 및 형태를 X선 회절분석법(XRD)과 시차주사열량계(DSC), 적외선 분광분석기(FTIR), 주사현미경(SEM)을 통해 연구하였다. 이러한 연구 결과로부터 제조조건들에 따른 미립구의 특성을 확인할 수 있었다. 또한 POX 미립구의 분해성을 10일 동안 in vitro 실험을 통해 조사하였다. 본 연구를 통해 잘토프로펜을 함유한 POX 미립구를 최적화된 용매증발방법으로 제조하였고, 이 미립구로부터 약물의 방출제어를 확인할 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.120-121
• /
• 2017

Generally, slump of plain concrete slab is about 120~150mm and slump loss is easy to occur. So, water is added to concrete because this method is convenient for Placing. In order to solve this problem, performance evaluation of concrete using improvement type PC admixture was carried out. Target slump is 210mm and compressive strength is 18MPa. As a result, slump reference value was satisfied 60 minutes after placing and 7-day compressive strength was 21~25MPa.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.283-286
• /
• 2012

According to increase of the waste concrete occurrence, recycling has being important more and more. This study is to recycle the waste concrete powder, which is occurred in dry-process during recycling of construction waste. We have tried the waste concrete powder to apply as the replacement of the silica powder in cement extruding product. As a result, it is satisfied that the autoclave cured pannel of 50% replacement ratio of waste concrete powder staisty the level of the flexural strength of 14MPa stipulated by "KS F 4735 Extruding concrete panel" was the same thermal properties as base specimen.

• 한국정밀공학회지
• /
• 제18권10호
• /
• pp.178-183
• /
• 2001

Abrasive jet machining(AJM) process is similar to the sand blasting and effectively removes hard and brittle materials. AJM has applied to rough working such as debarring and rough finishing. As the need for machining of ceramics, semiconductor, electronic devices and LCD are increasing, micro AJM is developed, and has become the inevitable technique to micromachining. This paper describes the performance of the micro AJM in micro grooving of glass. Diameter of hole and width of line in grooving is 80${\mu}{\textrm}{m}$. Experimental results showed good performance in micro grooving of glass, but the size of machined groove increased about 2~4${\mu}{\textrm}{m}$. With the fine tuning of masking process and compensation of film wear. this micro AJM could be effectively applied to the micro machining of semiconductor, electronic devices and LCD.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.17-23
• /
• 1996

The objective of this study is to present the reference data about the influence of concrete properties using crushed sand, according to the change of powder content and grain shape. From the test results. We obtained that as powder content is increased, sand aggregate ratio, water content and S.P/C are increased in mixing design of concrete. The more powder content is the less slump and air content loss are decreased in fresh state, but the higher compressive strength and drying shrinkage are increased in hardened concrete state. As grain shape become round, water content is decreased in mixing design of concrete. And also, loss of slump and air content in fresh state, compressive strength in hardened state are increased.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.381-384
• /
• 2005

The purpose of this study reutilization of waste fine tailing (FT) as admixture for cement and concrete. Various admixtures were made of Fine tailings and 2 Types of OPC, fly-ash and blast furnace slag. Cement mortars and concrete with FT are tested for fluidity and compressive strength. Also, the hydration reactivity of cement mortar with FT was examined by XRD and SEM morphology analysis. This work showed that the waste fine tailing could be effectively utilized as replacement materials of cement without any decrease in the strength if we can control the blaine of materials like cement, blast furnace slag and fly ash.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.297-300
• /
• 2004

The purpose of this study reutilization of waste fine tailing as admixture for cement. We observe tailing's basic properties such as shape, physical and chemical basic features. Also, various admixtures were made of 2 Types of tailings, OPC, fly-ash and blast furnace slag. The basic properties of the cement mortars incorporation with these admixtures were examined and analyzed under a verity of experimental conditions. This work showed that the tailing separated coarse materials could be effectively utilized as replacement materials of cement without any decrease in the strength if we can control the blaine of materials like OPC, slag and fly ash.