• Weed & Turfgrass Science
• /
• v.3 no.4
• /
• pp.342-346
• /
• 2014

The purpose of this experiment is for investigating how much the amino acid liquid fertilizer and composted liquid manure, culture microorganism effect on the breeding of grasses and knowing the extent of the thatch content through an analysis of the soil. For testing about soil chemical, the quality of grasses, and the extent of the thatch content in the soil, we cultivated 6 kinds of microorganisms having the effect of thatch dissolution and sprayed these 6 microorganisms with composted liquid manure and the amino acid liquid fertilizer on the place Creeping bentgrass have planted. This conduction started from June to October, 2012 and 2013 (The interval: 2 weeks). In the result of the turf growth, there is no big difference between soil chemical and trace element. And we can know Leaf Color Index, Chlorophyll Index and Root Length are almost same as among treatment. In conclusion, the mixing fertilization of culture microorganism and composted liquid manure is better effective than the traditional fertilization. And it can be expected the effect of the quality of grass and Thatch decomposition in soil.

• Journal of Conservation Science
• /
• v.36 no.3
• /
• pp.152-161
• /
• 2020

The purpose of this study was to compare the chemical properties of white soil and refined clay sediment, which are produced early in the refining process. The characteristics of the white wares made at the kiln site in Goseong-ri, Chuncheon were also examined. Three groups of materials were examined: white wares excavated from the white wares kiln, raw material from white soil collected from the surface, and a refined clay sediment group. There were also three analysis methods, which were a main components analysis, a trace components analysis, and a mineral analysis. The main components analysis found that the white wares clay was in the RO₂4.04~4.28 and the RO + R₂O 0.30~0.31 mole areas, which were similar to the results for the refined clay sediment. However, the refining process used to produce better quality white wares meant that the large differences in the early white soil raw material appeared in the refined sediment. The mineral phase analysis showed that the crystals detected in the early white soil raw materials and refined clay sediment were almost identical. However, quartz and mullite mineral phases, which can occur above a certain temperature, were detected in the excavated white wares clay. Rare earth elements that were not affected by the pottery making process and the weathering of clay materials were found to have the same origin in all three groups.

• Ecology and Resilient Infrastructure
• /
• v.4 no.3
• /
• pp.180-185
• /
• 2017

Restoration of min-impacted arable land is often performed through stabilization of trace elements by amendment treatment combined with (clean) soil covering on the surface. Recently, soil loss problem from sloping remediated agricultural lands has risen as an emerging concern. In this study, efficacy of aggregation formation was assessed by single and binary treatments of four potential amendments (bentonite, lime, organic matter, and steel slag) applied on three cover soils having different clay contents (9.4, 14.7, and 21.2% for A, B, and C soils respectively). In results of single treatments, 5% organic matter for A soil and 5% lime for B and C soils were found most effective for the aggregation formation compared to the respective controls (without amendments). Among nine binary treatments, 3% organic matter + 1% lime for A soil and 1% organic matter + 3% lime for both B and C soils led to the highest formation of aggregation (30.4, 25.0, and 36.5% for A, B, and C soils). For a site-application, the soil erodibility difference between the cover soils (0.045, 0.051, and 0.054 for A, B, and C soils, respectively) and the national average of arable land (0.032) was assumed to be compensated by amendment addition, which is equivalent to 29.1% aggregation formation. To achieve the aggregation goal, 5% lime for A and B soils and 3% lime for C soil were best in the consideration of benefit/cost, thereby effectively and economically reducing soil loss from sloping remediation site. Soil alkalinity induced by lime treatment was not considered in this work.

• Microbiology and Biotechnology Letters
• /
• v.29 no.4
• /
• pp.227-233
• /
• 2001

To maximize astaxanthin (3,3'-dihydroxy-$\beta\beta$'carotene-44'-dione) production by high density Haematococcus pluvialis cultures, various, media were examined Among tested media, \`Hong Kong Medium and Modified Bolds Basal Medium showed the best result for cell growth ( $2.0$\times$10^{ 6}$cells /mL) and for astaxanthin content per cell (9.7 mg astaxanthin mg/g cell), respectively, Maximum astasanthin concentration of 6.1mL was obtained at pH 7.5, $20^{\circ}C$~$25^{\circ}C$ Deficiencies of nitrogen source($NaNO_3$ and proteose-peptone) found to simulate astaxanthin formation Relatively low light inten- sity of $60\mu$E ($\m^2$s) was sutiable for vegetative cell growth while higher light intensity was required for higher astaxanthin accumulation.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.3 no.4
• /
• pp.56-64
• /
• 2000

Behavior of trace metals in Masan Bay, Korea was studied in August 1998 when the oxygen deficient condition occurred. Dissolved Cd and Zn concentration in the surface waters decreased with increasing distance from Masan Harbor. Dissolved concentrations of Cd, Cu Pb and Zn in the surface waters were higher than bottom waters. Particulate(acid-teachable fraction) concentrations of Cu, Cd and Pb in the surface waters of Masan Bay decreased with increasing distance from Masan Harbor. Bottom waters contained higher concentrations of particulate Cd, Cu, Pb and Zn than surface waters. Distribution coefficients between dissolved and particulate phase (K/sub d/) of Cu and Cd decreased with the increasing distance from the Harbor, possibly due to reaction of these elements with sewage-derived particulate matter Al, Zn, Cu, Cd, and Pb in the surface sediment showed relatively high concentration in the inner Masan Bay.

• Korean Journal of Community Nutrition
• /
• v.2 no.4
• /
• pp.477-485
• /
• 1997

This study was conducted to determine the effect of large amounts of whole cow's milk intake on serum levels of minerals and lipids. Subjects were normal infants who were brought to the pediatric hospital for vaccination at the age of 7-26 months after birth, living in Eumsung-Choongbuk area. The serum concentrations of the imnerals(calcium, phosphorus, magnesium, iron, zinc and copper), lipids and fatty acids composition were analyzed in 38 infants which consumed large amount of whole cow's milk(over 700ml/day). The results obtained are summarized as follows : 1) The mean levels of calcium, phosphorus and magnesium in the serum of the total subjects were 7.56$\pm$0.51mg/dl, 11.12$\pm$0.72mg/dl and 1.62$\pm$0.13mg/dl respectively. The serum concentrations of iron, zinc and copper in total subjects averaged 72.42$\pm$1.62$\mu\textrm{g}$/dl, 76.29$\pm$3. 62$\mu\textrm{g}$/dl and 86.44$\pm$2.98$\mu\textrm{g}$/dl respectively. 2) The mean serum concentrations of triglyceride, total cholesterol, HDL and LDL in the total number of subjects were 96.84$\pm$9.22mg/dl, 133.45$\pm$6.30mg/dl, 32.79$\pm$1.77mg/dl and 81.29$\pm$4.81mg/dl respectively. 3) The average percentages of SFA, MUFA and PUFA inth total serum fatty acids were 38.98$\pm$2.42$\%$, 25.82$\pm$0.98$\%$ and 37.30$\pm$1.09$\%$ respectively and the mean$w6/w3$fatty acids ratio was 13.48. In general, the levels of serum minerals and $\omega$3 fatty acid composition in the subjects of this study, who were whole cow's milk fed infants were lower than those reported in breast milk or formula fed infants. Therefore, the intake of large amount of whole cow's milk in the weani ng period should be controlled and adequate for the infant's nutritional status. (Korean J Community 2(4) : 477-485, 1997)

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.3
• /
• pp.199-206
• /
• 2009

The aim of this study is to investigate the relations among each white stone and their characteristics through the chemical and mineralogical analysis of them excavated from around some kilns in archaeological sites. Moreover it was intended to infer the function of kilns. Nine white stones were chosen from three different archaeological sites, the each name of which is Sanyang-ri, Youngdu-ri and Gwangdae-ri in Chungcheongnam-do. In the mineralogical characteristics of thin section, eight stones containing calcite are altered and recrystallized by metasomatism and hydrothermal process, and Calcites, major component minerals of limestone, were identified by the analysis of XRD. On the basis of this result, we can infer the stones to be classified into limestone groups. One the other hand, research revealed that one of the white stones was a white pelitic stone composed of quartz, microcline and muscovite. In the analysis of chemical composition, except for the white pelitic stone eight stones are mainly composed of CaO which is major component of Calcite. Besides, as a results of correlation analysis by using a chemical compositions of major and minor elements in white stones, little did each archaeological site have the relativity. In conclusion, each archaeological site was estimated that they would use a limestone ores extracted from different deposits, and there is a high possibility that the function of these kilns is to produce quicklime.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.4
• /
• pp.224-233
• /
• 2018

Thirty-three Early Iron Age bronzes at the sites of Hoam-dong in Chungju and Cheongsong-ri in Buyeo were investigated in order to study the manufacturing technique and the provenance of lead. Chemical analysis using X-ray fluorescence showed that 33 bronzes consist of copper(Cu), tin(Sn) and lead(Pb) served as major elements. Major and minor elemental analyses by EPMA were performed on two mirrors and 2 weapons of the bronzes investigated. The results shows that bronze mirrors from Chungju and Buyeo were high-tin bronzes(> 30 wt%). And 20% of tin and 5% of lead were founded in bronze weapons. Iron, zinc, arsenic, silver, nickel, sulfur and cobalt detected in four bronzes as minor and trace elements. The four bronzes were alloyed considering their function and were not heat treated after casting due to their high tin content. Lead isotope analysis using TIMS indicates that thirty-three bronzes were distributed southern Korea peninsula except Zone 1. As a result, lead raw materials came from various regions in Korean Peninsula not from Gyeongsang-do regions. The manufacturing techniques of bronze ware generalized at this age, and bronze was produced in various sites using raw materials from various sources.

• Korean Journal of Poultry Science
• /
• v.37 no.1
• /
• pp.35-41
• /
• 2010

The effect of combination of chitosan coating and gamma irradiation on Escherichia coli inactivation and nutritional properties of shell egg was investigated. The E. coli inoculated on shell egg was not detected by 2 kGy of gamma irradiation at day 0 and/or chitosan coating (1%, pH 5.0) after 3 days of storage. There was no E. coli detected thereafter. In the contents of moisture, crude fat, crude protein, ash, retinol, phospholipid, and minerals, no difference was found by treatment combination. However, the contents of cholesterol and carotenoids were reduced by irradiation of 2 kGy (P<0.05). Results suggest that the combination of gamma irradiation (2 kGy) and chitosan coating (1%) can be a good method to improve the safety and prolonged shelf-life of egg because of effective pathogen inactivation without significant adverse changes in nutritional quality.

• Journal of Nutrition and Health
• /
• v.12 no.3
• /
• pp.25-32
• /
• 1979

In order to investigate harmful trace elements in ford additives used in food processing the contents of Copper, Lead, Cadmium, Chromium, Manganese, Nickel and Iron are determined by Atomic Absorption Spectrophotometer. These Elements are Extracted with APDC-MIBK extract method. Samples are collected from the food Industrial companies in Korea. Samples studied as shown in Table 1 are food colors(3-samples, Flavoring Agents(7-samples), Acidifiers(4-samples) Baking Powders(4-samples), Emulsifiers(2-samples), Thickeners(2-samples), Antioxidants(2-samples), Intensifiers(2-samples), Seasonings(3-samples), modifiers (10-samples) Most of the food additives contained comparatively a little small amount of harmful trace elements. However, the contents of harmful trace elements of Sodium Carbonate, Food Yellow No.5, Food Blue No.1, Food Red No.2 and Alkalies added in noodles are significantly higher than the other food additives. The obtained results are as follows ; 1) Sodium Carbonate contained Cadmium; 16.73 ug/g and Lead ; 61.55 ug/g. 2) Food Yellow No. 5 contained Cadmium: 1.67ug/g and Lead; 23.46 ug/g. 3) Food Blue No. 1 contained Cadmium; 1. 16 ug/g and Lead; 23.46 ug/g. 4) Food Red Ho. 1 contained Cadmium; 1.91 ug/g and Lead 23.08 ug./g. 5) Alkalies added in noodles contained Cadmium; 6. 11 ug/g and Lead; 53.85 ug/g.