• 제목/요약/키워드: 미드솔

검색결과 8건 처리시간 0.022초

비선형 유한요소법을 이용한 신발 해석 및 설계 (Analysis and Design of Shoes Using Non-Linear Finite Element Method)

  • 김병수;문병영
    • Elastomers and Composites
    • /
    • 제38권3호
    • /
    • pp.195-205
    • /
    • 2003
  • 본 논문에서는 미드솔에 에어싸이클 펌프를 장착한 골프화에 대한 해석적 방법과 설계기술을 보여준다. 골프화는 유한요소법으로 모델링 하였으며, 더 나은 설계를 위해서 신발을 구성하는 미드솔과 아웃솔의 형상을 고려하였다. 또한 미드솔에 있는 에어싸이클 펌프의 최적의 크기와 형상을 조사하였다. 표준 인체 압력 값을 유한요소해석의 경계 값으로 채택하였다. 오그덴 타입의 변형률에너지 함수의 미지 상수는 인장시험에 따라서 조사하였다. 비선형해석을 위해서 상용 유한요소해석 프로그램 MARC V7.3을 이용하여 미드솔과 아웃솔의 변형률과 부피 변화 값을 각각 구하였다. 미드솔과 아웃솔 유한요소법에 의해 구해진 값은 탄성체의 특성에 따라서 달리 나타난다. 여기에 보인 결과는 보다 나은 골프화 해석에 사용될 것이다. 더욱이, 결과 간들은 보다 효과적인 방법을 개발하기 위한 방법으로 신발산업체에 사용되어 질 수 있다.

미드솔의 경도 및 두께가 스포츠화의 굽힘 특선에 미치는 영향 (The Effects of Hardness and Thickness of Midsole on the Bending Properties of Footwear)

  • 박차철
    • Elastomers and Composites
    • /
    • 제41권2호
    • /
    • pp.125-130
    • /
    • 2006
  • 폴리우레탄(PU)과 폴리에틸렌비닐아세터이트(EVA) 미드솔이 스포츠화의 굽힘 강성에 미치는 영향을 이해하기 위하여 두께와 경도가 다른 중창으로 스포츠화를 제조하여 중창이 스포츠화의 굽힘특성에 미치는 영향을 고찰하였다. 스포츠화의 굽힘 모멘트는 굽힘 각도 $19^{\circ}$에서 나타나기 시작했으며, 이 초기 굽힘각도는 중창의 경도나 두께에 무관한 것으로 나타났다. 중창의 경도 및 두께가 증가함에 따라 스포츠화의 굽힘 모멘트의 값은 현저하게 증가하는 경향을 나타내었다. 발포체 시트나 미드솔 자체만으로 비교하였을 때보다 스포츠화의 굽힘 강성이 미드솔의 두께나 경도 등 신발의 설계에 따라 더욱 크게 영향을 받는 것으로 나타났다.

유한요소법을 이용한 공기 순환 방식의 골프화 설계에 관한 연구 (1Analysis of Outsole in Golf shoes by using Finite Element Method)

  • 송우진;김용욱;문병영;강범수
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집C
    • /
    • pp.224-228
    • /
    • 2001
  • This paper presents the analyzing method of golf shoes and shows design technique including air-cycled pump in the midsole. The golf shoes are analyzed by using the finite element method for the optimization in design by considering the configuration of midsole and outsole, which compose the golf shoes. Also the optimum size of air-cycled pump in the midsole is examined. Standard human pressure values for boundary conditions are adoped for the finite element analysis. The unknown constants of the strain energy function of Ogden type are observed in accordance with the axial tension test. By using the commercial FEM software for nonlinear analysis, MARC V7.3, the strains and the values of volume change for midsole and outsole are obtained, respectively. As a result, it can be concluded that these values in the midsole and the outsole are different depending on the characteristic of elastomer. More precise investigation about the assembly of two parts, which represent midsole and outsole, is under studying.

  • PDF

유한요소법을 이용한 신발의 열전달 해석 및 설계 (Heat Transfer Analysis and Design of Shoes Using Finite Element Method)

  • 김병수;문병영
    • Elastomers and Composites
    • /
    • 제38권3호
    • /
    • pp.206-212
    • /
    • 2003
  • 본 논문에서는 인솔에 coolant가 있는 골프화에 대해서 이론적인 해석방법과 설계기술을 연구하였다. 골프화를 구성하고 있는 인솔의 형상과 미드솔, 아웃솔을 고려하여 유한요소법으로 모델링하였다. 열전달을 위한 유한요소의 경계조건으로는 인간발의 표준적인 온도가 사용되었다. 열전달해석을 위해 상용프로그램으로는 MARC V7.3를 사용하였고 온도 및 인솔의 열전도량을 구했다. 본 연구에서 열전달의 특성에 따라서 유한요소법의 결과가 다르게 나온다는 결론을 얻었다. 본 연구 결과는 골프화 해석에 보다 나은 이해를 제공해준다. 더욱이, 본 연구결과는 골프화 관련 업체에서 활용할 경우 보다 효과적으로 설계하도록 도울 것이라고 믿는다.

비젼 시스템을 이용한 가스벤트 자동 교환 장치 (A study on the development of Gas-Vent Automatic Exchange Machine with Vision System)

  • 홍준의;윤동업;길경석;추영열;권장우
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2005년도 춘계종합학술대회
    • /
    • pp.304-308
    • /
    • 2005
  • 본 연구는 발포수지 공정에 사용되는 가스벤트를 신발중창 금형에 자동으로 교환하는 장치에 관한 것이다. 가스벤트는 폴리우레탄과 같은 소재를 이용한 신발 미드솔 발포시 발생되는 가스를 제거하기 위한 다공질 소자로서 신발금형 상부에 삽입된다. 가스벤트는 소모성 부품으로 일정주기마다 교환이 필요하나 작업공정상 수작업에 어려움이 많아 자동화된 교환시스템이 요구된다. 하지만 삽입되는 신발중창 금형과 가스벤트간은 유격이 거의 없으므로 본 연구에서는 신발 중창 금형의 손상을 방지하고 보다 신속한 교환을 위해 가스벤트 삽입 및 추출 홈의 위치정보를 영상을 통해서 구하고, 얻어진 영상에 대한 위치 데이터를 기계적 위치 추적 시스템의 데이터로 피드백 하여 홀의 중심 위치에서 가스벤트를 삽입 및 추출하여 자동으로 교환하는 장치를 구현하였다. 영상 처리는 패턴 매칭 기법을 이용하여 홀의 중심점을 구하였고, 이를 PLC로 전송하여 기계 작동 제어 및 XY플로터를 정밀 제어하여 공정이 진행되게 하였다.

  • PDF

런닝화의 미드솔 경도가 하지 근육의 피로와 충격력에 미치는 영향 (The Effect of Midsole Hardness of Running Shoe on Fatigue of Lower Extremity Muscles and Impact Force)

  • Kim, Eonho;Lim, Kyuchan;Cho, Seunghyun;Lee, Kikwang
    • 한국운동역학회지
    • /
    • 제29권3호
    • /
    • pp.167-172
    • /
    • 2019
  • Objective: The aim of this study was to investigate the effect of midsole hardness of running shoe on muscle fatigue and impact force during distance running. Method: Ten healthy college recreational runners who were performing distance running at least three times a week participated in this experiment. They were asked to run for 15 minutes in the treadmill at 10 km/h with running shoes having three different types of midsole hardness (Soft, Medium, Hard). EMG signal and insole pressure were collected during the first and last one minute for each running trials. Data were analyzed using a one-way analysis of variance (ANOVA) with repeated measures. Results: Midsole hardness did not affect the consistency of stride length. For the median frequency of the EMG signal, only VL was affected by midsole hardness; that of medium was greater than other midsoles (p<.05). The loading rate of impact forces increased by midsole hardness (p<.01). Conclusion: Although soft midsole could attenuate impact forces at heel contact, it might have a negative effect on the fatigue of muscle which could decelerate the body after heel contact. Therefore, it is necessary to select the optimum hardness of midsole carefully for both reduction impact forces and muscle fatigue.

미드솔의 반발탄성이 러닝화의 생체역학적 특성에 미치는 영향 (Effects for Running Shoes with Resilience of Midsole on Biomechanical Properties)

  • 유찬일;원용관;김정자
    • 한국운동역학회지
    • /
    • 제25권1호
    • /
    • pp.103-111
    • /
    • 2015
  • Objective : The purpose of this study was to evaluate the effect for running shoes with resilience of midsole on biomechanical properties. Methods : 10 healthy males who had no history of injury in the lower extremity with an average age of 26.5 year(SD=1.84), height of 172.22 cm(SD=4.44) and weight of 67.51 kg(SD=6.17) participated in this study. All subjects ran on the treadmill wearing three different running shoes. Foot pressure data was collected using Pedar-X system(Novel Gmbh, Germany) operating at 100 Hz. Surface EMG signals for biceps femoris, rectus femoris, vastus lateralis, medial lateralis, tibialis anterior, medial gastrocnemius, soleus and peroneus longus were acquired at 1000 Hz using Bignoli 8 System(Delsys Inc., USA). To normalize the difference of the magnitude of muscle contractions, it was expressed as a percentage relative to the maximum voluntary contraction (MVC). The impact resilience of the midsole data was collected using Fastcam SA5 system(Photron Inc., USA). Collected data was analyzed using One-way ANOVA in order to investigate the effects of each running shoes. Results : TPU midsole was significantly wider in contact area than EVA, TPE midsole in midfoot and higher in EMG activity than EVA midsole at biceps femoris. TPE midsole was significantly wider in contact area than EVA midsole in rearfoot and higher in peak pressure than EVA midsole in forefoot. EVA midsole was significantly higher in EMG activity than TPU midsole at tibia anterior. In medial resilience of midsoles, TPE midsole was significantly higher than EVA, TPU midsole. Conclusion : TPU midsole can reduce the load on the midfoot effectively and activate tibialis anterior, biceps femoris to give help to running.