• Journal of Korea Port Economic Association
• /
• v.28 no.1
• /
• pp.123-142
• /
• 2012

The purpose of this paper is to suggest a plan on succeeding together-Busan New Port & BJFEZ(that is, port hinterland development). This study deals with the terms of three connection growth factors which are a firm's subjective factors, a industrial environment factors, and a governmental policy factors. According to analysis results of the factors, a firm's subjective factors(4.11 score) are scored the most ones of connection growth factors of Busan New Port & BJFEZ, to be compared with a governmental policy factors(4.01 score). with a industrial environment factors(3.92 score). Therefore, first of all, Busan New Port & BJFEZ have to promote connection growth through as follows, a firm's subjective factors : (1) to procure competitiveness through establishment of connection growth model, (2) to promote concentrated marketing strategy & market response ability, (3) speedy meeting to customer's needs, (4) to procure reliability of Busan New Port & BJFEZ. And, the next, Busan New Port & BJFEZ have to promote connection growth through considering a governmental policy factors, a industrial environment factors.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.987-993
• /
• 2002

최근 들어 전자상거래의 급속한 발달로 전 세계적으로 수송 물동량이 급격히 증대되고 있고, 이로 인해 택배사업이 대단히 활성화되고 있다. 출발지와 목적지가 서로 상이한 무수히 만은 수송 요구가 들어오면 수송 요구화물의 신속한 집배송을 위한 배차계획 및 수송계획을 세우는 것이 택배회사의 주요 업무이다. 이러한 배차 계획 및 수송 계획을 어떻게 수립하느냐에 따라 전체 수송비용뿐만 아니라 고객들의 서비스 수준에 상당한 영향을 미치게 된다. 그러나 이러한 운영적 차원에서의 의사결정 이전에 훨씬 중요하게 고려해야 할 내용이 택배네트워크의 설계 문제이다. 이러한 택배네트워크의 설계에는 터미널 개수 및 위치를 결정하는 전략적 문제와 영업소들을 터미널에 할당하는 전술적 문제로 구분될 수 있다. 현재 우리 국내에는 크고 작은 수많은 택배사업자들이 있으나, 그 중에서 비교적 규모가 큰 주요 택배회사들은 대부분 전국에 걸쳐 다수의 터미널을 설치하여 두고 수송화물의 집배송을 위한 물류거점으로 운영하고 있다. 이와 같은 터미널 위치 및 개수가 정해진 상태에서 전국에 걸쳐 분포되어 있는 영업소들을 어떤 터미널에 할당하여 처리되도록 하느냐의 여부는 수송비용 측면에서뿐만 아니라 고객들에 대한 서비스 측면에서 대단히 중요한 의사결정 중의 하나이다. 본 연구에서는 비용과 시간을 고려하여 전국에 걸쳐 분포되어 있는 영업소들을 어떤 터미널에 할당해야 하는지를 결정하기 위한 수리적 모형을 제시하고, 이에 대한 탐색적 해법을 제시하며, 국내의 택배회사 사례를 대상으로 모형을 적용해 보고자 한다.무가 많이 발생하는 유통 분야의 프랜차이즈 산업을 대상으로 기업정보시스템 구현 및 경쟁력 강화를 뒷받침하기 위해서, 기업간 프로세스 협업(collaboration) 부분의 데이터 및 서식, 이를 취급하는 기능과 프로세스에 대란 분석을 통해 업무 프로세스 모델링 방법론과 관련한 모델링 지침 및 메타모델을 이용한 표준 업무 프로세스 모델을 개발하여 기업간 업무 프로세스 표준화에 대한 체계적인 관리에 대한 방안을 연구하고자 한다.의Bullwhip effect를 감소시킬 수 있는 장점이 있다. 동시에 이것은 향후 e-Business 시스템 구축을 위한 기본 인프라 역할을 수행할 수 있게 된다. 많았고 년도에 따른 변화는 보이지 않았다. 스키손상의 발생빈도는 초기에 비하여 점차 감소하는 경향을 보였으며, 손상의 특성도 부위별, 연령별로 다양한 변화를 나타내었다.해가능성을 가진 균이 상당수 검출되므로 원료의 수송, 김치의 제조 및 유통과정에서 병원균에 대한 오염방지에 유의하여야 할 것이다. 확인할 수 있었다. 이상의 결과에 의하면 고농도의 유기물이 함유된 음식물쓰레기는 Hybrid Anaerobic Reactor (HAR)를 이용하여 HRT 30일 정도에서 충분히 직접 혐기성처리가 가능하며, 이때 발생된 $CH_{4}$를 회수하여 이용하면 대체에너지원으로 활용 가치가 높은 것으로 판단된다./207), $99.2\%$(238/240), $98.5\%$(133/135) 및 $100\%$ (313)였다. 각

• Journal of Korea Port Economic Association
• /
• v.27 no.4
• /
• pp.73-90
• /
• 2011

Global companies regard the conditions of a location as one of the most crucial factors to assess the competitiveness of ports and the port hinterland, as well as emphasize creation of throughput and the importance of value added logistics in the hinterland under diffusing Supply Chain Management(SCM). This study deals with the evaluation of competitiveness in 7 hinterlands and the establishment of assessment model in hinterland. This study analyzes the importance of factors for the port hinterland competitiveness using AHP method. As a result, logistics factor, accounting for 62.3%, is shown as the relative more important factor, followed by hinterland's economy factors(27.3%) and city/policy factor(10.4%). The result implicates that measures to activate logistics factors with relatively high importance are essentially needed in order to improve the competitiveness of the hinterland of Busan New Port. Especially, it is needed to establish service routes of the port and air networks and to expand infrastructure for support. This study also assesses the competitiveness of hinterlands for the seven domestic and foreign ports based on importance of assessment factors for the hinterland competitiveness using AHP analysis. Busan(3.903) is ranked fourth behind Singapore(4.570), Hong Kong(4.357) and Shanghai(4.042) in assessment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.1195-1203
• /
• 2014

Since IFC (Industry Foundation Classes) 4 is based on the representation of 3D elements for an architecture project, and does not define standardized shapes for civil projects such as roads, bridges, and tunnels etc, it has limitations in securing interoperability for exchanging a shape information model for the civil projects. Besides, since road facilities have a linear reference, which is modeled along the center alignment, it is difficult the designers to create a standardized 3D road model. The aim of this study is to configure structure elements and their attribute for a road in the perspective of 3D design for developing a shape information model for the road. To solve these issues, this study analyzes the design documents, which consist of a road design handbook, guide, specifications and standards, and then extract shape elements and their attributes of road structures. Such shape elements are defined as an entity item and we review a hierarchical structure of a road shape defined by a virtual road model. The detailed elements and their attributes can be utilized as a 3D shape information model for constructing BIM (Building Information Modeling) environment for Infrastructures. Besides, it is expected that the suggested items will be utilized as a base data for extending to IFC for a road subdividing the detailed shapes, types and attributes for road projects.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.418-427
• /
• 2017

In Korea, interest in basic research is growing, in order to ensure the sustainable competitiveness of the main industries and to support world-class technology that can create high added value in the future. However, companies are known to encounter various problems when attempting to market products based on the results of basic research, which is known to be due to their lack of experience of commercialization and related activities. Therefore, in this study, we tried to analyze the effect of the technology commercialization activity stemming from basic science and technology research on the business performance. The technology commercialization activities are divided into experience of commercialization, complete charge department, and consulting on technology commercialization and we developed an analytical model that (distinguishes between?) the technology innovation activities and technology innovation capabilities and analyzed their impact on the business performance. As a result, the importance of technology commercialization activities was confirmed by the fact that it had a positive effect on the business performance, while the technological innovation activity was found to positively affect the management performance, demonstrating that it plays a strategic role in companies. Finally, it was found that the technology innovation capacity partially influences the management performance and that it is necessary to establish a strategic research and development infrastructure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.7-17
• /
• 2019

With increasing demand for large offshore infrastructures, suction cofferdams have been large, and the lid stiffener arrangement for a suction cofferdam has become a key element in cofferdam design to constrain the flexural deformation effectively. This study analyzed the changes in the structural behavior of a lid for a suction cofferdam due to lid stiffeners to provide insights into effective stiffener arrangements. By investigating conventional suction anchors, several stiffener patterns of a lid for a polygonal suction cofferdam were determined and analyzed. The structural performance of the stiffened lids was estimated by comparing the stress and deformation, and the reaction distributions on the edge of lid were investigated to analyze the effects of the stiffener arrangement on the lid-wall interface. Finite element analysis showed that radial stiffeners contribute dominantly to decreasing the stress and vertical deflection of the lids, but the stiffeners cause an increase in shear forces between the lid and wall; the forces are concentrated on the lid near the areas reinforced with radial stiffeners, which is negative to lid-wall connection design. On the other hand, inner and outer circumferential stiffeners show little reinforcement effects in themselves, while they can help reduce the stress and deformation when arranged with partial radial stiffeners simultaneously.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.4
• /
• pp.387-397
• /
• 2021

Most of Korea's agricultural water is supplied by reservoirs, so dependence on them is very high. Accordingly, it is important to reduce this dependence and provide a stable agricultural water supply by utilizing an applicable alternative water source. Therefore, in this work, scenarios for different land uses were constructed, and an optimal water supply plan using rainwater and reused sewage water - which are alternative water sources - was created. A study was also conducted to determine the optimal capacity of a rainwater facility. From the analysis, a stable water supply was achieved in the scenario of maximum utilization of rainwater by changing an existing paddy area to a greenhouse area, and about 0.82 ton of flow capacity was required for 1 mm of rainfall on farms utilizing rainwater. As a result of analyzing the optimal scenario to derive the ratio of the storage capacity per unit water collection area, the rainwater storage capacity determined through MODSIM and the storage capacity determined through actual monitoring showed similar results, about 31 and 32 %, respectively, and the optimal capacity of rainwater facilities was calculated to be about 5,796,000-6,182,400 ton.

• Journal of Korea Water Resources Association
• /
• v.54 no.spc1
• /
• pp.1155-1166
• /
• 2021

In this study, statistical analysis was performed to suggest the optimal analysis techniques for the main measuring instruments of the fill dam, such as seepage, crest settlement, and porewater pressure gauge. In addition, correlation analysis with water level and rainfall data was performed. Based on the results of descriptive statistical analysis for each instrument, porewater pressure gauges could be classified into 3 groups or 2 groups through principal component analysis, In the case of the group having a high correlation with the water level instrument, the correlation between the gauges was also large. In the case of seepage instrument, the distribution showed an extremely asymmetric distribution, so for quantitative analysis, the average seepage during non-precipitation and precipitation could be estimated through decision tree analysis. In the case of the crest settlement instrument, the correlation analysis showed that the correlation between the gauges was large, but the relationship with the water level instrument did not show a significant linear relationship, so EMD analysis was performed to analyze it in more detail. It is judged that principal component analysis, decision tree analysis, and data filtering method can be applied to analyze the behavior of pore water pressure meters, seepage, and crest settlement instrument as major measurement items of fill dam.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.5
• /
• pp.551-557
• /
• 2021

Attached parking lots installation criteria is determined by use, total floor area, etc. according to the Parking Lot Act and local government ordinances. However, with traffic demand increase inconvenience about use of culture and assembly facilities have been raised. When planning number of parking lots for cultural and assembly facilities, legal parking lots and unit parking lots are used, but this causes inconvenience and traffic problems on the surrounding roads, because reality and convenience are not considered. Therefore, this study intend to present an realistic number of parking lots calculating equation for movie theater in Gwangju Metropolitan City. After investigating number of parking lots, number of screens, number of seats, total floor area, bus route and illegal parking for a cultural facility in Gwangju Metropolitan City, prediction model for calculating number of parking lots was presented using SPSS regression analysis. As a result of comparing prediction model and unit method, the prediction model was be closer actual cumulative parking space, so prediction model verification was completed. Based on the model verified in this study, Realistic number of parking lots will be installed. However, due to limitations of research on specific areas, research on various facilities should continue in consideration of regional, population, and urban characteristics

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.269-275
• /
• 2019

As the national industry is developing gradually due to the expansion of the economic scale, the construction of large and super high-rise structures for building social infrastructure has been increasing, and studies have been conducted actively to transmit the large loads at the upper portion to the lower bedrock. In this study, the PHC was extended to an ultra-high strength PHC, which increased the concrete compressive strength of the PHC from the conventional 80 MPa to 110 MPa, and the PHC, which extended the tip of the pile. After construction with the driving method and injected pile method, the tendency of the bearing capacity was tested through a load test. Measurements of the bearing capacity of the extended PHC using the pile driving method revealed the main surface friction force to be smaller than that of the general PHC, and the stet-up effect was also insignificant. On the other hand, the effect of the friction force on the ground surface when the injected pile method was applied is expected to increase the bearing capacity when the gap between the main surface and the ground is wide and the cement paste is filled tightly. In addition, the ultrahigh strength PHC showed higher bearing capacity than the conventional PHC, and the permissible pile stress was less than 60%. Therefore, it is possible to reduce the number of piles and reduce the construction cost and effect of shortening the length of the pile by designing the tip of the pile on the ground with the intensity of soft rock as a method for utilizing the increased strength of the ultra-high strength PHC.