• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.346-351
• /
• 2018

Metal three-dimensional (3D) printing technologies are mainly classified as powder bed fusion (PBF) and direct energy deposition (DED) methods according to the method of application of a laser beam to metallic powder. The DED method can be used to fabricate fine and hard 3D metallic structures by applying a strong laser beam to a thin layer of metallic powder. The PBF method involves slicing 3D graphics to be a certain height, laminating metal powders, and making a 3D structure using a laser. While the DED method has advantages such as laser cladding and metallic welding, it causes problems with low density when 3D shapes are created. The PBF method was introduced to address the structural density issues in the DED method and makes it easier to produce relatively dense 3D structures. In this paper, thin lines were produced by using PBF 3D printers with stainless-steel powder of roughly $30{\mu}m$ in diameter with a galvano scanner and fiber-transferred Nd:YAG laser beam. Experiments were carried out to find the optimal conditions for the width of a line depending on the processing times, laser power, spot size, and scan speed. The optimal conditions were two scanning processes in one line structure with a laser power of 30 W, spot size of $28.7{\mu}m$, and scan speed of 200 mm/s. With these conditions, a minimum width of about $85.3{\mu}m$ was obtained.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.7
• /
• pp.754-759
• /
• 2015

Nowadays, short distance communication systems with low power energy (LPE) are developed for identification and monitoring of site identification of vessel crews and passengers (SIVCP). LPE communication modules, such as Bluetooth low energy (BLE) and Zigbee, are used for short distance communications with LPE. These modules enable 1:N communications and their popularity is growing since the modules can be mounted on movable objects, such as mobile devices and human body. When these modules are used, the important factor that affects their operation time and design are the capacity and size of battery. Therefore, they must be made as small as possible, and the battery should be selected to be slightly smaller than the module. In this study, we calculate the theoretical life of batteries used in SIVCP BLE modules using data sheet and discharge characteristic graph under the condition of a 1/250 transmission-ratio (TR). We thus calculate experimental life by measuring transmission current for the same TR, and low speed mode current for a 1/5000 TR and measure long-term experimental life using 1/25 TR for days. Through these experiments, we verify experimental methods for the prediction and extension of battery life that would enable us to select appropriate sizes of batteries based on vessel usage and passenger types. The selections of the module TR and battery size are important factors affecting the cost reduction of module design, the battery maintenance, and passenger convenience.

• Journal of Korea Multimedia Society
• /
• v.13 no.5
• /
• pp.663-673
• /
• 2010

As a tool used for video maintenance, Video segmentation divides videos in hierarchical and structural manner. This technique can be considered as a core technique that can be applied commonly for various applications such as indexing, abstraction or retrieval. Conventional video segmentation used adaptive threshold to split video by calculating difference between consecutive frames and threshold value in window with fixed size. In this case, if the time difference between occurrences of cuts is less than the size of a window or there is much difference in neighbor feature, accurate detection is impossible. In this paper, Improved Adaptive threshold algorithm which enables determination of window size according to video format and reacts sensitively on change in neighbor feature is proposed to solve the problems above. Post-Processing method for decrement in error caused by camera flash and fast movement of large objects is applied. Evaluation result showed that there is 3.7% improvement in performance of detection compared to conventional method. In case of application of this method on modified video, the result showed 95.5% of reproducibility. Therefore, the proposed method is more accurated compared to conventional method and having reproducibility even in case of various modification of videos, it is applicable in various area as a video maintenance tool.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.6
• /
• pp.1-8
• /
• 2005

In this paper, we propose a two-stage head tracking algorithm adequate for real-time active camera system having pan-tilt-zoom functions. In the color convergence stage, we first assume that the shape of a head is an ellipse and its model color histogram is acquired in advance. Then, the min-shift method is applied to roughly estimate a target position by examining the histogram similarity of the model and a candidate ellipse. To reflect the temporal change of object color and enhance the reliability of mean-shift based tracking, the target histogram obtained in the previous frame is considered to update the model histogram. In the updating process, to alleviate error-accumulation due to outliers in the target ellipse of the previous frame, the target histogram in the previous frame is obtained within an ellipse adaptively shrunken on the basis of the model histogram. In addition, to enhance tracking reliability further, we set the initial position closer to the true position by compensating the global motion, which is rapidly estimated on the basis of two 1-D projection datasets. In the subsequent stage, we refine the position and size of the ellipse obtained in the first stage by using shape information. Here, we define a robust shape-similarity function based on the gradient direction. Extensive experimental results proved that the proposed algorithm performs head hacking well, even when a person moves fast, the head size changes drastically, or the background has many clusters and distracting colors. Also, the propose algorithm can perform tracking with the processing speed of about 30 fps on a standard PC.

• Journal of Plant Biotechnology
• /
• v.29 no.2
• /
• pp.129-134
• /
• 2002

194 plantlets regenerated from leaf explants of boxthorn 'Cheonyang' were cultivated to investigate their morphological characteristics in the field for 2 years. Based on the morphology of leaves, 66.1% of them had elliptical type leaf, the same as that of mother plants, while 22.2% in oval type, 7.2% in obovate type, 2.6% in long-obvate type and 2.1% in lanceolate type. They were classified to 4 groups; group A was selected with both high fruit size and fruit yield, group B with only high fruit size, group C with larger or thicken leaf, and group D with multiple brenches. In comparision of production efficiency between the selected groups and mother plants, group A (99741, 99781, 99854, 99870 and 99886) were longer (2.1 to 2.7 mm) in length of fruits and higher in fruit production (15 to 30%) as compared to mother plants. Croup D (99797 and 99892) was higher in leaf production (7.2%) as compared to boxthorn 'CL1-48', which is the highest in leaf production among boxthorn veriaties.

• Research in Plant Disease
• /
• v.8 no.2
• /
• pp.92-100
• /
• 2002

For the survey of viruses infected in peanut cultivated in Korea, peanut seeds and leaves showing viral symptoms were collected from their growing areas. Typical symptoms on virus infected peanut leaves including mosaic, mottle with necrosis, yellowing, stripe or vein banding and stunts were observed. Two viruses isolated from the naturally infected peanuts were identified as Bean common mosaic virus(BCMV-PSt) and Peanut mottle virus(PeMoV) by their host range, immunosorbent elcetron microscopy(ISEM), direct immuno staining assay(DISA), RT-PCR, and intracellural symptoms. Direct negative staining method by electron microscope showed filamentous particles of about 780 m in length as well as inclusion bodies. In ultrathin sections of BCMV-PSt and PeMoV infected tissues, cytoplasmic cylindrical inclusions as well as filamentous virus particles were observed in the cytoplasm of parenchyma cells. ISEM revealed filamentous particles strongly decorated with antiserums of BCMV-PSt and PeMoV Peanut seeds were stained with BCMV-PSt and PeMoV antisera indicating the possibility of seed transmission far these viruses. Seedlings germinated from peanut seeds which reacted with antiserums of BCMV-PSt by DISA showed mild mottle or stripe symptoms while mosaic and necrotic mottle symptoms were observed for PeMoV-positive seedlings. Filamentous particles were strongly decorated with each antiserum under ISEM observation. BCMV-PSt coat protein gene of about 1.2 Kbp was amplified by RT-PCR. Altogether these results indicate that BCMV-PSt is the most prevalent virus infecting peanut in Korea.

• Journal of The Korean Association For Science Education
• /
• v.19 no.1
• /
• pp.8-18
• /
• 1999

The purpose of this study is to investigate middle school student's conceptual change about Force and Motion by the courseware based on constructivism. It is well known to science educators that misconcrptions about physics concepts are hardly changed into scientific ones. So as to change student's misconceptions about force and motion, the courseware was developed through the analysis of students' conceptions. 20 students were tested before and after learning through the courseware. One of the questions was about the direction of force acting on the ball thrown in the air when it is rising, at the top, and falling. The other was about the magnitudes and directions of forces acting on a car when it is accelerating, in uniform velocity, and decelerating. The results are as follows: In case of vertical motion, all students had misconceptions before learning, but after learning 5 students(25%) have changed their ideas into scientific ones. In case of horizontal motion, 9(45%) out of 20 students who had misconceptions about force and motion have changed their ideas into scientific ones.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.1
• /
• pp.111-121
• /
• 2011

Intelligent video analysis systems require techniques which can predict accidents and provide alarms to the monitoring personnel. In this paper, we present an abnormal behavior analysis technique based on adaptive background generation. More specifically, abnormal behaviors include fence climbing, abandoned objects, fainting persons, and loitering persons. The proposed video analysis system consists of (i) background generation and (ii) abnormal behavior analysis modules. For robust background generation, the proposed system updates static regions by detecting motion changes at each frame. In addition, noise and shadow removal steps are also were added to improve the accuracy of the object detection. The abnormal behavior analysis module extracts object information, such as centroid, silhouette, size, and trajectory. As the result of the behavior analysis function objects' behavior is configured and analyzed based on the a priori specified scenarios, such as fence climbing, abandoning objects, fainting, and loitering. In the experimental results, the proposed system was able to detect the moving object and analyze the abnormal behavior in complex environments.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.5
• /
• pp.39-46
• /
• 2007

Research on human identification in ubiquitous environment has recently attracted a lot of attention. As one of those research, gait recognition is an efficient method of human identification using physical features of a walking person at a distance. In this paper, we present a human shape extraction and tracking for gait recognition using geodesic active contour models(GACMs) combined with mean shift algorithm The active contour models (ACMs) are very effective to deal with the non-rigid object because of its elastic property. However, they have the limitation that their performance is mainly dependent on the initial curve. To overcome this problem, we combine the mean shift algorithm with the traditional GACMs. The main idea is very simple. Before evolving using level set method, the initial curve in each frame is re-localized near the human region and is resized enough to include the targe region. This mechanism allows for reducing the number of iterations and for handling the large object motion. The proposed system is composed of human region detection and human shape tracking modules. In the human region detection module, the silhouette of a walking person is extracted by background subtraction and morphologic operation. Then human shape are correctly obtained by the GACMs with mean shift algorithm. In experimental results, the proposed method show that it is extracted and tracked efficiently accurate shape for gait recognition.

• Korean Journal of Plant Tissue Culture
• /
• v.27 no.3
• /
• pp.213-217
• /
• 2000

To investigate the cucumber regeneration from embryogenic calli, shoot tips of aseptically-grown cucumber seedlings were used as explants for establishing tissue cultures. Growth and differentiation of callus were studied by using Murashige and Skoog's (MS) medium containing 0.5 to 2 mg/L 2,4-D. Plantlets were induced from shoot tip culture on the plant growth regulators-free MS medium. Non-embryogenic calli and viscous calli were induced on the medium supplemented with 0.5 to 2 mg/L 2,4-D, but embryogenic callus was not induced on the same medium. Segments (ca. 5∼10 mm) of aseptically-grown hypocotyl from five to seven days old seedlings after germination were placed on MS medium supplemented with 1 mg/L 2,4-D for 50 days. Embryogenic calli and embryoids were induced only from the seedlings grown in dark condition, and hypocotyl was placed on the media explanted in light condition. Foully-five point one percent of white fragile calli and 0.6% yellowish compact calli formed roots. Yellowish callus lines were investigated to have a considerably higher concentration of crude proteins than white callus lines. Plantlets derived from embryogenic calli or embryoids have been transferred to pots containing sterile vermiculite and perlite. Normal fruits were harvested from nutrient culture on aggregated hydroponics in the F-clean house.