• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.162-163
• /
• 2018

This study introduces the R&D project of development of the 1st LNG bunkering barge in Korea. The Design and pilot test of Barge-To-Ship 500cbm LNG bunkering barge system for coastal trading LNG-fueled ship is proposed. The following technologies will be developed from the project ; Basic/Detail design and pilot test of LNG Bunkering barge system, Basic/Detail design and pilot test of LNG bunkering process system considering LNG loading/unloading, Basic/Detail design and pilot test of 500cbm LNG tank in type-C, Evaluation of bunkering performance according to conditions (environment, SIMOPs) by numerical simulation, Performance evaluation of bunkering barge, towed barge and Barge-To-Ship motion considering ocean environment load, and scenario in Barge-To-Ship LNG bunkering. This project will contribute expansion to LNG-fueled ship industry and pave the way to establish LNG bunkering hub port.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.562-566
• /
• 2012

A novel design of tubular segmented-in-series(SIS) solid oxide fuel cell (SOFC) sub module was presented in this paper. The tubular ceramic support was fabricated by the extrusion technique. The NiO-YSZ anode and the yttria-stabilized zirconia (YSZ) electrolyte were deposited onto the ceramic support by dip coating method. After sintering at $1350^{\circ}C$ for 5 h, a dense and crack-free YSZ film was successfully fabricated. Also, the multi-layered cathode composed of LSM-YSZ composite, LSM and LSCF were coated onto the sintered ceramic support by dip coating method and sintered at $1150^{\circ}C$. The performance of the tubular SIS SOFC cell and sub module electrically connected by the Ag-glass interconnect was measured and analysed with different fuel flow and operating temperature.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.2
• /
• pp.65-72
• /
• 2015

Performance tests of a turbopump for the developing 7-tonf liquid rocket engine were conducted. The performance of turbopump components and their power matching were measured and examined firstly under the LN2 and water environment. In the real propellant(LOX and kerosene) environment tests, design and off-design performances of turbopump were fully verified. During the off-design tests, turbopump running time was set the same as engine operating time and pump inlet pressure were set lower than nominal operating value in order to investigate pump suction capability. It have been verified that subject turbopump satisfies required performance - flow rate, head, suction performance and operational time - in the operating regime of developing liquid rocket engine.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.177-181
• /
• 2012

This study presents the preparation of double emulsions in a poly(dimethylsiloxane) (PDMS)-based microfluidic device. To improve the wettability of hydrophilic continuous phase onto a hydrophobic PDMS microchannel, the surface was modified with 3-(trimethoxysilyl) propyl methacrylate (TPM) and then sequentially reacted with acrylic acid monomer solution, which produced selective covalent bonding between acrylic acids and methacrylate groups. For the proof of selective surface modification, tolonium chloride solution was used to identify the modified region and we confirmed that the approach was successfully performed. When water containing 0.5% w/w sodium dodecyl sulfate and 1% w/w Span80 with hexadecane were loaded into the selectively modified microfluidic channels, we can produce stable double emulsion. Based on the spreading coefficients, we predict the morphology of double emulsions. Our proposed method efficiently produces monodisperse double emulsions having 48.5 ${\mu}m$(CV:1.6%) core and 65.1 ${\mu}m$ (CV:1.6%) shell. Furthermore, the multiple emulsions having different numbers of core were easily prepared by simple control of flow rates.

• Journal of Korea Water Resources Association
• /
• v.36 no.2
• /
• pp.273-284
• /
• 2003

In this paper, the reasons of damages and the case study are review in which bridge pier with debris accumulation, and safety Influence factors by debris around the bridge piers are review. Also experiment Is conducted for the characteristic of flow around piers by different area and angle of debris and the basic characteristics was review for safe design of bridge and embankments. As result of review of several standards of design, hydraulic structure's freeboard is simply decided by discharge, so it needs more detail standards. And as result of experiment, in the case of that water depth is deep and velocity is slow, variation of water depth Is more increase as increasing of debris. Therefore the variation regime of flow characteristics like velocity and water depth by debris is more large in the stream of small or medium size, which streams have large water depth and slow velocity so Froude Number Is expressed as small in the flood. Also when Froude Number is about 0.5, the water elevation is over freeboard in the standard if the debris over 20%. Therefore when hydraulic structure is constructed in the stream of small or medium size, it need to conduct more detail experiments about influence of debris, distribution of velocity and variation of elevation, and than the more safe freeboard will be presented using the experimental results.

• Journal of Korea Water Resources Association
• /
• v.39 no.11 s.172
• /
• pp.935-946
• /
• 2006

This study proposed a new procedure of sustainable water resources planning to prevent the urban streamflow depletion, based on the Heathcote's study in 1998: (1) to understand the watershed component and processes, (2) to identify and quantify problems within the watershed, (3) to set clear and specific goals, (4) to develop a list of management options, (5) to eliminate infeasible options, (6) to test the effectiveness of remaining feasible options, and (7) to develop the final options. PSR(Presure-State-Response) concept was used for the determination of indicators of PSD(Potential Streamflow Depletion; step 2) and effect equation (step 7) and composite programming for the calculation of PSD. The instreamflow requirement was proposed as clear and specific goal (step 3) and was determined by the larger of the PHABSIM's environmental flow and the drought flow. A continuous rainfall-runoff model is necessary to test the effectiveness of alternatives. It should estimate not only the exact runoff but also the effect of landuse change, reservoir, infiltration facility and so on like SWAT(Soil and Water Assessment Tool). The proposed procedure will be applied on the corresponding paper.

• Resources Recycling
• /
• v.25 no.1
• /
• pp.24-30
• /
• 2016

The study to obtain tantalum concentration from electronic components (ECs) on Printed circuit board assembly (PCBA) of laptop was conducted. Electronic components on laptop PCBA were detached from boards by using self-developed experimental apparatus. The detached electronic components were sieved and 93.2 wt.% of tantalum capacitors were concentrated from the size interval from 2.80 mm to 6.35 mm. The tantalum capacitors were pulverized by hammer mill and electrodes (anode and cathode) were removed from the grinding products by using magnetic separators under the magnetic force of 300 Gauss. Finally, tantalum concentrate was concentrated from the magnetic separator products by using Knelson concentrator, and the maximum efficiency of 76.9% was achieved under the operating condition of bowl rotating speed of 200 rpm, and fluidizing water flowrate of 7 L/min. The grade and recovery of Ta concentrate under the condition were 81.1% and 78.8%, respectively.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.881-881
• /
• 2012

낙동강유역에는 4대강 사업으로 8개의 보가 낙동강 본류에 새롭게 설치되었으며, 따라서 상류로부터 유입되는 유사가 보상류에 퇴적되어 하천제방이나 하천구조물의 안전을 위협할 수 있다. 또한 홍수시에는 농경지의 매몰과 저수지의 퇴적현상이 발생하는 등 유역유사에 의한 다양한 문제가 발생할 수 있으며, 강우로부터 유출되는 유사는 강우사상에 따라 빠르게 변할 수 있으나 수체에 즉각적인 영향을 유발하지 않을 경우 만성적인 특성으로 인해 침전물을 계속 이동시키며 축적되는 문제가 발생한다. 따라서 이러한 문제를 사전에 예측하고 낙동강유역에 대한 유역유사관리 대책마련을 마련하기 위해 유역유출과 유사의 이송 및 퇴적양상을 분석하여 유역관리를 위한 자료를 구축할 필요가 있다. 이러한 기초자료 분석을 위해 활용되는 유역모형 중 SWAT(Soil and Water Assessment Tool) 모형은 장기간 유역 유출로 인한 유사 모의를 수행하는데 가장 많이 활용되는 모형이며, 미국 농무성 농업연구소(USDA Agricultural Research Service, ARS)의 Jeff Amold 등에 의해 개발된 모형이다. SWAT 모형은 장기유출 및 유사 발생에 대한 시 공간적 변화를 모의하는 모형으로 넓은 범위의 유역에 대해 일단위 모의 간격으로 최대 100년까지 모의가 가능한 장기유역 모의에 최적화된 모형이다. 본 논문에서는 SWAT 모형을 이용하여 낙동강유역의 장기 유역 유출 및 유사 모의를 수행하기위해 2004년에서 2009년까지의 유출량 자료와 유량-유사량관계곡선 등을 이용하여 본류 및 지류 유출구 주요지점에 대해 검보정을 수행하고자 한다. 모의의 정확도 향상을 위해 안동댐, 임하댐, 영천댐, 합천댐, 남강댐, 밀양댐 및 낙동강 본류 등 총 7개 유역으로 구분하여 SWAT 모형을 구축하였으며, 각 유역별로 유출량과 유사량에 대하여 각각 보정 및 검증을 수행하였다. 낙동강 본류유역 총 7개의 댐 방류량자료와 20개의 대형하수종말처리장 방류량자료를 이용한 낙동강유역의 유출량 보정 및 검증 결과, 모의치가 실측치를 잘 반영하고 있는 것으로 나타났다. 또한 총 11개 지점의 수위관측소에 대해 유사량 측정 성과를 이용한 유사량 보정 및 검증 결과, 강우시 유사량 모의값은 유출량-유사량관계곡선 식을 잘 반영하였으나, 비강우시에는 모의값이 관계곡선 식의 결과값보다 대체적으로 높게 나타났다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.273-273
• /
• 2010

고열부하 환경에 노출되는 핵융합로의 플라즈마 대향부품은 주로 낮은 원자번호 물질-열전도가 좋은 물질-구조체의 순으로 다층 구조를 이루고 있으며, 이들 간의 우수한 접합성은 부품의 성능을 좌우하는 핵심 요소이다. 이러한 플라즈마 대향부품의 건전성을 평가하기 위해서는 고열속의 열부하를 반복적으로 인가하는 시험이 요구되며, 이를 위해 본 연구원에서는 KoHLT-1, 2의 시험시설을 운용하고 있다. 본 시설에서는 열부하원으로서 그라파이터 히터를 사용하며, 히터는 두 개의 시험 대상부품 사이에 설치되고, 히터에 고전류를 인가하여 복사열에 의해 시험 부품에 열부하를 가하게 된다. 고열부하 환경에서 열피로 시험을 위해 히터에 인가되는 전류를 시간에 따라 일정한 패턴으로 반복적으로 ON-OFF 하게 된다. 본 논문에서는 이러한 고열부하시험을 수행함에 있어 고려해야 할 여러 가지 요소에 대해 논의하였다. 우선 인가하는 열유속(heat flux) 값은 일차적으로 시험시설의 최대 출력에 의해 좌우되며, 시험대상물의 운전조건 및 열부하 반복횟수에 의해 결정된다. 열부하 반복횟수는 주어진 열유속 값에 대해 total strain이 파단에 이르는 수준에 의해 결정된다. 열부하를 인가하는 시간은 히터에 전류를 인가했을 때 요구되는 온도로 상승하는 데 걸리는 시간과 시험대상물의 온도가 더 이상 증가하지 않는데 걸리는 시간에 의해 좌우된다. 냉각시간은 길수록 시험대상물의 온도가 냉각수의 온도에 접근하게 되나 너무 길어지면 시험시간이 급격히 증가하게 되므로, 온도 감소 곡선을 검토하여 적절한 시간을 정하게 된다. 열유속 측정은 냉각수의 온도 상승값과 유량으로부터 계산하게 되며, 정확한 측정을 위해서는 열부하를 인가하는 시간이 충분히 길어야 한다. 또한 시험대상 부품에서 열부하가 인가되는 면적을 정확히 정의해야 하며, 냉각관로에 열부하가 인가되어서는 않된다. 또한 시험대상부품을 지지하는 지지구조체를 통한 열손실을 최소화해야 정확한 열유속을 측정할 수 있다. 시험대상부품을 설치할 때 히터와의 간격 또한 결정해야 할 중요한 요소이며, 간격이 좁을수록 최대 열유속 값을 증가시킬 수 있으나, 너무 가까운 경우 히터의 열변형에 의한 접촉 및 아크 방전의 가능성이 있으며, 이 경우 히터와 시험대상부품의 손상을 가져오게 된다. 시험대상물이 국제열핵융합로(ITER)의 일차벽과 같이 베릴륨이 포함되어 있는 경우 방전에 의한 손상은 인체에 유해한 오염의 원인이 될 수 있다. 또한 순간적인 방전은 고가의 고전류전원의 고장을 유발할 수도 있다. 열부하 시험 중 시험대상물의 온도를 정확히 측정하는 것은 필수적이며, 온도 변화 곡선으로부터 시험대상물의 건전성 여부를 판단할 수 있다. 이를 위해 변화를 가장 잘 탐지 할 수 있는 위치에 온도 센서를 설치하는 것이 관건이며, 이는 사전 분석을 통해 알 수 있다.

• Water for future
• /
• v.29 no.4
• /
• pp.209-221
• /
• 1996

It may be difficult to make exact estimates of peak discharge or runoff depth of a flood and to establish the proper measurement for the flood protection since water stages or discharges have been rarely measured at small river basins in Korea. Three small catchments in the Su-Young river basin in Pusan were selected for the study areas. Various runoff parameters for the study areas were determined, and runoff analyses were performed using three different runoff models available in literatures; the storage function method, the discrete, linear, input-output model, and the linear reservoir model. The hydrographs calculated by three different methods showed good agreement with the observed flood hydrographs, indicating that the models selected are all capable of sucessfully modeling the flood events for small watersheds. The storage function method gave the best results in spite of its weakness that it could not be applicable to small floods, while the linear reservoir model was found to provide relatively good results with less parameters. The capabilities of simulating flood hydrographs were also evaluated based on the effective rainfall from the storage function parameters, the $\Phi$-index method, and the constant percentage method. For the On-Cheon stream watershed, the storage function parameters provided better estimates of effective rainfall for regenerating flood hydrographs than any others considered in the study. The $\Phi$-index method, however, resulted in better estimates of effective rainfall for the other two study areas.