• Composites Research
• /
• v.26 no.2
• /
• pp.129-134
• /
• 2013

The strength of adhesive joints employed in composite structures under cryogenic environments, such as LNG tanks, is affected by thermal residual stress generated from the large temperature difference between the bonding process and the operating temperature. Aramid fibers are noted for their low coefficient of thermal expansion (CTE) and have been used to control the CTE of thermosetting resins. However, aramid composites exhibit poor adhesion between the fibers and the resin because the aramid fibers are chemically inert and contain insufficient functional groups. In this work, electrospun meta-aramid nanofiber-reinforced epoxy adhesive was fabricated to improve the interfacial bonding between the adhesive and the fibers under cryogenic temperatures. The CTE of the nanofiber-reinforced adhesives were measured, and the effect on the adhesion strength was investigated at single-lap joints under cryogenic temperatures. The fracture toughness of the adhesive joints was measured using a Double Cantilever Beam (DCB) test.

• Fashion & Textile Research Journal
• /
• v.1 no.3
• /
• pp.264-274
• /
• 1999

The thermal resistance of 60 men's suits for summer and winter was measured to determine their thermal characteristics and physical properties, including air permeability, weight, and thickness of the jackets and trousers consisted of the ensembles were measured to predict the thermal resistance of garments and ensembles. In this study, general physical properties of the men' suit ensembles were determined. In general, thickness and weight of winter ensembles were greater than those of summer ensembles. A factor which could distinguish the difference between summer and winter ensembles was the air permeability. The air permeability of summer ensembles was 3~6 times greater than those of winter ensembles. For the thermal characteristics, the thermal resistance of winter ensembles were higher than those of summer ensembles. When the wind was involved, the thermal resistance of both ensembles decreased up to 30%. In addition, the equations were developed to predict the thermal resistance of the garments and ensembles when there was no air velocity and the thermal resistance of the ensembles with air velocity of 1.2 m/sec. Looking at the equations, thickness, weight, and size of the garments were the definite factors that affect the thermal resistance of the samples.

• Elastomers and Composites
• /
• v.37 no.2
• /
• pp.99-106
• /
• 2002

In this work, the surface properties and mechanical interfacial properties of the carbon blacks treated by oxygen plasma were investigated. The surface properties of carbon black by oxidation process of oxygen plasma were studied in acid-base surface value, zeta potential, and X-ray photoelectron spectroscopy (XPS). And their mechanical interfacial properties of the carbon black/rubber composites were evaluated by the composite tearing energy ($G_{III}c$). As a result, it was found that the introduction rate of oxygen-containing polar functional groups, such as carboxyl, hydroxyl, lactone, and carbonyl groups, onto the carbon black surfaces was increased by increasing the plasma treatment time. It revealed that the polar rubber, such as acrylonitrile butadiene rubber (NBR), showed relatively a high degree of interaction with oxygen-containing functional groups of the carbon black surfaces, resulting in improving the tearing energy ($G_{III}c$) of the carbon black/acrlyonitrile butadiene rubber composites.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.7
• /
• pp.908-911
• /
• 2006

Fish paste containing Styela clava (Korean name: miduduk) was prepared for the supplementary value of the product, and it was evaluated for the color, textural properities, and sensory attributes. Increasing the amount of S. clava in the fish paste tended to increase the lightness (L), the redness (a), and the yellowness (b) in Hunter color values. All test samples with 3 mm thickness had good flexibility and did not break even after 4 times folds. Fish paste containing 20% S. clava showed the highest values in strength, hardness, and adhesiveness. In overall acceptance of sensory evaluation, fish paste containing 5% S. clava did not show any difference in comparison with non added control. These results suggest that S. clava can be applied to fish paste products to improve the quality and functionality.

• Journal of Aerospace System Engineering
• /
• v.17 no.4
• /
• pp.1-9
• /
• 2023

Recently, as Synthetic Aperture Radar (SAR), communication, and signal surveillance missions of spacecraft have become more advanced, research has been actively conducted on the deployable large mesh antenna system with excellent storage efficiency compared to the deployment area, and light weight. Deployable Mesh antennae are characterized by an increase in the number of Openings Per Inch (OPI), which is a measure of mesh weaving density as the mission frequency band increases, and this OPI change directly affects the thermal optical properties of the mesh antenna, so research on this is required. In this paper, to verify the thermal relationship between the optical properties of the mesh and antenna reflector, thermal sensitivity analysis between the mesh and the antenna reflector is performed by in-orbit thermal analysis with various optical characteristics of the mesh based on existing overseas research cases. In addition, the temperature gradient effect of the mesh reflector is analyzed.

• Elastomers and Composites
• /
• v.37 no.4
• /
• pp.258-264
• /
• 2002

In this work, the influence of thermal treatment on surface properties of silicas and mechanical interfacial properties of silicas/polyurethane composites was investigated. The surface properties of thermally treated silicas were studied in the context of Fourier Transform-IR (FT-IR), solid-state 29Si NMR spectroscopy, and contact angle. And the mechanical interfacial properties of the silica/polyurethane composites were evaluated by composite tearing energy (GIIIC). As a result, it was found that the thermally treated silica surfaces became hydrophobic in nature, due to the condensation of surface hydroxyls and the formation of siloxane bonds, resulting in increasing the London dispersive component of surface free energy. From which, the increase of the London dispersive component of the silicas led to an improvement of the dispersion of silicas in a polyurethane matrix, finally resulting in improving the tearing energy (GIIIC) of the silicas/polyurethane composites.

• Electrical & Electronic Materials
• /
• v.4 no.1
• /
• pp.53-64
• /
• 1991

절연체중에 있는 하전입자의 거동은 절연재료의 특성에 많은 영향을 준다. 본 연구에서는 호핑모델에 의한 수치해석법을 TSC특성과 쌍극자분극에 대한 TSC특성은 차이가 있었다. 실험과 대응시켜 가동이온에 관한 물성정수의 평가를 하였다. 호핑모델에 의해서 불포화 TSC와 I-V특성의 수치계산을 하였다.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.328-328
• /
• 2002

PET 絲의 특성은 중합단계나 방사, 연신 등의 원사제조공정의 공정조건뿐 아니라 사가공 공정을 거쳐 winding, 2-for-1 twisting, sizing등의 제직준비 공정과 제직 공정에 의해서 물리적인 특성이 크게 변화한다. 이러한 공정을 거치면서 품질과 성능변화에 절대적인 영향을 미치는 공정요소는 온도, 시간 그리고 장력이다(37). PET 絲는 공정을 거치면서 역학적 특성이나 열적 특성의 차이로 인해 공정관리 면에서 middle stream의 중소기업들이 시행착오에 의해 공정조건을 결정하는 현실에 처해있다. (중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.88-88
• /
• 2004

내압을 받는 압력관의 파괴는 원주방향의 응력이 주된 요인이므로, 압력관의 안전성을 평가를 위해서는 원주방향의 인장특성을 아는 것이 필요하다. 소형 압력관의 인장특성을 평가할 때, 정확한 원주방향의 인장특성을 알기 위해서는 관으로 가공된 후의 재료로 시험해야 하지만, 부피의 제약으로 인하여 원주방향으로의 표준 인장시험편을 제작하지 못하므로 가공하기 전의 재료의 물성치를 사용하고 있다. 이를 개선하고자 원주방향의 인장특성을 평가하기 위한 방법의 하나로 링 시험법(ring test)이 있다.(중략)

• Journal of the korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.14-18
• /
• 1988

액체의 미립화는 액체연료의 연소를 위한 분무, 분무 도장, 농약 살포, 의료기기, 용융 금속의 금속 분말의 제조 등의 여러분야에 널리 이용되고 있다. 특히 연소 기관은 액체 연료의 미립화와 증발 특성에 따라 기관의 연소와 성능은 크게 변화하므로 연소실 내의 연료 미립화 특성의 개선은 매우 중요하다. 미립화에 영향을 미치는 인자에는 연료의 물성과 분사 기구 및 분사 밸브 등의 구조와 분사압력 등은 연료 미립화에 주된 영향을 미치는 요인의 하나가 되고 있다. 여기서는 주로 액체연료의 미립화에 일반적인 기초 사항과 분무 특성의 표시 방법, 측정법에 대하여 기술하기로 한다.