• Tunnel and Underground Space
• /
• v.21 no.6
• /
• pp.480-493
• /
• 2011

Dynamic rock property is one of most important parameters in design of earthquake-resistant structures. In this study, free-free resonant column test has been conducted to obtain dynamic Young's modulus, dynamic shear modulus, and damping ratio among dynamic properties with granite specimen of Chungnam Yeongi area. The dynamic properties obtained from this test were compared with the physical properties from static rock tests, and their relationship has been analyzed. From our study, it has been concluded that the dynamic Young's modulus and the dynamic shear modulus are linearly proportional to the elastic wave velocity. And also the damping ratio has been identified to be in non-linear inverse proportion to the elastic wave velocity.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.1
• /
• pp.1-7
• /
• 2015

Purpose: For optimizing properties of final glasses frame, the aim of this study is to examine the correlation of processing conditions and properties of cellulose acetate (CA) sheets through the investigation of properties of CA sheets prepared under processing steps. Methods: The properties of CA sheets were investigated in terms of different glasses frame processing conditions, bending process, barrel process, and ultrasonic cleaning process. CA sheets prepared through the sequential processing were examined by various analysis: gloss, mechanical properties, thermal properties. Results: After barrel process, hardness and tensile strength of CA sheet were increased. However, bending strength and impact strength were decreased. It is suggested the CA sheet had became rather stiff state (brittle). Also, in degradation temperature region of plasticizer, about 3% of reduction in plasticizer weight was confirmed upon TGA analysis. Conclusions: Glasses frame process, especially in the barrel process have a profound influence on the properties of CA sheet owing to reduction of total amount of plasticizer.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.11a
• /
• pp.149-153
• /
• 2002

1968년 Phillips Petroleum사에 의해 개발된 LLDPE(linear low density polyethylene)는 저가이며 인장강도, 연신율 등의 뛰어난 기계적 물성으로 인해 각종 필름, 코팅제, Cable용으로 사용되고 있다. 일반적으로 LLDPE의 용융점은 12$0^{\circ}C$정도이나 이보다 매우 낮은 온도에서 연화되어 기계적 물성이 급격히 저하되므로 Coating재료, 단열Cable, 내열성 Film분야 등의 용도에는 사용상 제약을 받는다. 반면 Silicone은 난연성, 내열성, 내화학특성 및 전기절연성이 우수하여 공업재료로 널리 사용되지만 기계적물성, 저온취성, 고가인 단점이 있어 용도에 따라 일반재료로는 사용하기 어렵다.(중략)

• Journal of the Korean Magnetics Society
• /
• v.16 no.4
• /
• pp.211-215
• /
• 2006

Measurement methods in order to measure the mechanical properties nondestructively have been studied. The mechanical properties of the structural and turbine rotor steels are related with their magnetic properties. If the magnetic properties of the cold rolled carbon steel sheet (CR) for a car are measured nondestructively, its mechanical properties are analogized by their magnetic properties. And then the mechanical properties are monitored on-line by measuring the magnetic properties. We prepared three CR materials, CBQ 3060, CBQ 3041, and CBQ 3036, were prepared in order to measure their mechanical and magnetic properties. The Vickers hardness,yield strength, and tensile strength were measured by ASTM E 8M, and the reversible magnetic permeability was measured by the surface type probe. The coercivity calculated by the peak interval of reversible magnetic permeability increased linearly with the increase of Vickers hardness, yield strength, and tensile strength. The amplitude of the peak interval of reversible magnetic permeability drastically decreased when the lift-off was increased.

• Journal of Adhesion and Interface
• /
• v.2 no.1
• /
• pp.31-43
• /
• 2001

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.4
• /
• pp.43-50
• /
• 2004

A large concrete dam, of which construction work had not been continued for more than 20 years because of social problem, was investigated with emphasis on its seismic performance. Mechanical properties of the concrete dam material were estimated by performing uniaxial compression tests for obtained the samples from dam body. Borehole image Processing System (BIPS) was used to investigate the susceptible faults developed in the interface between old an new concretes. Using the results of several laboratory and field tests earthquake response analysis for the dam were done, The results of such investigation show that its physical and mechanical conditions are in a good condition, and the results earthquake response analysis imply that the dam, even it consists of two different concretes, show good seismic performance.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.10a
• /
• pp.49-50
• /
• 1996

비다공성막에서의 기체투과는 분리용막의 재료가 되는 기능성 고분자와 분리하고자 하는 기체 혼합물과의 작용이 투과확산을 지배하며 고분자의 구조에 의하여 결정되는 극성, 수소결합, 응집 에너지 밀도, 고분자 주쇄 유연성, 입체장애, 주쇄간 거리, 측쇄기의 운동성 등의 많은 인자들과 막결정화도 등의 인자들이 복합되어 기체투과에 작용하기 때문에 고분자 구조와 투과 특성과의 관계가 정량적으로 밝혀지지않고 있으나, 실험적 사실을 근거로 정성적 고찰이 이루어지고 있으며 몇가지 고분자막 미세구조를 나타내는 측정가능 물성들과 투과 특성을 상관시킬 수 있다. 폴리이미드막은 합성되는 diahydride와 diamine의 변화에 의해 다양한 화학적 구조를 갖는막을 만들 수 있으며 이들 막의 물성치들과 투과특성들도 서로 다르게 나타난다. 본 연구에서는 PMDA-MDA polyimide를 기본으로하여 다른 종류들의 Phenylene diamine을 첨가시켜 제조한 서로 다른 화학적 구조를 갖는 기체분리막들의 측정 가능한 물성치들과 산소, 질소 투과특성의 연관상을 연구하여 이들 사이의 정성적 상관성이 있음을 고찰한다.

• Journal of Energy Engineering
• /
• v.24 no.4
• /
• pp.166-174
• /
• 2015

This study examined combustion characteristics by selecting the fuel which have a different physical properties compared to gasoline in order to examine the effects of vehicle performance and environment depending on the physical properties. The experiment examined the combustion characteristic in the optimum ignition timing according to the physical properties change and the lean burn by performing control about ignition timing and air-fuel ratio for each fuel, and it was also evaluated the exhaust gas according to the experiment. We used a single-cylinder engine for the experiment, and tested for gasoline properties change by selecting a fake fuel that beyond the fuel quality standards in 석대법. As a result, in the case of the selected fuel showed a difference in Octane and distillation characteristics, vapor pressure and it was also found to unstable combustion, and leads to a large amount of harmful exhaust gas.

• Journal of Adhesion and Interface
• /
• v.14 no.2
• /
• pp.68-74
• /
• 2013

We synthesized polyurethane elastomer containing acid groups. We measured the adhesion, grip, tensile strength and mechanical properties. Casting polyurethane elastomers were prepared with the contents of acid. The adhesive strength and the wet slip were increased. Also, the tensile strength and abrasion properties were increased. We measured the properties with different acid contents. Increasing the acid content, the mechanical properties were increased. But the mechanical properties were decreased above 0.20 wt% of acid content. The wet slip was increased and the contact angle was decreased as the acid content increased.

• The Journal of Engineering Geology
• /
• v.13 no.3
• /
• pp.335-344
• /
• 2003

This study is focused to the physical and shear strength properties of the weathered limestone soils distributed in Changsung and Hwasun area, Chonnam province. Disturbed soil was used as soil samples. To grasp the physical and shear strength properties of weathered limestone soil, specific gravity test, atterberg limit, grain size distribution and direct shear test were conducted in the laboratory. The physical and shear strength properties of the weathered limestone soil in the study areas are as follows. The range of specific gravity (Gs) is 2.78 to 2.80, liquid limits (LL) 37 to 38 (%), plasticity index (PI) 13.7 to 15.4, and soil classification CL. The range of strength parameters by direct shear test (vd, $1.5t/\textrm{m}^3$) is 3.07 to 4.4 ($t/\textrm{m}^2$) of cohesion and 34.8 to $42.4^{\circ}$ of internal friction angle in unsaturated soils. As a result of comparing with the weathered granite soils (Yang, 1997: Mun, 1998: Park, 1998), it is considered that physical properties of the weathered limestone soils in this study are different from the weathered granite soils. On the other hand, internal friction angle of shear parameters is found to be similar.