• Korean Journal of Organic Agriculture
• /
• v.21 no.2
• /
• pp.283-294
• /
• 2013

Root-rot disease is a serious problem in ginger cultivation fields and it reduces the quality and productivity of ginger. This study was conducted to investigate the effects of different soil physical and chemical properties on the changes of ginger growth. As comparing the selected soil chemical properties after harvesting the ginger plants with those before planting them, the contents of total nitrogen and exchangeable $Mg^{2+}$ increased, whereas electrical conductivity (EC) and exchangeable $K^+$ content decreased. Potassium (K) concentrations in ginger plant were markedly higher in both its shoot and root parts ranging from 63.9 to $72.3g\;kg^{-1}$ and from 27.6 to $37.3g\;kg^{-1}$, respectively, which might be related to the decrease of exchangeable $K^+$ content in soils. Incidence rate of ginger root-rot disease in the plots ranges between 26.7% and 88.1%. It was higher in low elevation plots with clay loam soils than in high elevation plots. In addition, the incidence of the disease increased as affected by high temperature and humid condition during the growth and maturity stages of ginger. Therefore, soil texture, field slop, and drainage system as well as chemical properties should be considered to cultivate ginger plant.

• Korean Journal of Food Science and Technology
• /
• v.34 no.2
• /
• pp.339-342
• /
• 2002

This study was comparised physical properties of waxy black rice and waxy rice. In case of physical properties of kernels, weight, length, length/width ratio and volume of waxy black rice were higher than those of waxy rice but width and density were very similar. Moisture gain of kernels of waxy black rices was increased continuously to 40 min. at various soaking temperatures ($20{\sim}50^{\circ}C$) and the water uptake rate constants ($k_0$) of waxy black rices during storage at $20{\sim}50^{\circ}C$ were also increased. The water uptake rate constant ($k_0$) of waxy rice ($0.058\;min^{-1/2}$) was the more fast than that of waxy black rice ($0.033\;min^{-1/2}$) during storage at $4^{\circ}C$. Also hardness reduced rate constant($-k_0$) of waxy rice ($0.048\;min^{-1}$) were the more fast than that of waxy black rice ($0.022\;min^{-1}$) about two times.

• Progress in Medical Physics
• /
• v.25 no.4
• /
• pp.233-241
• /
• 2014

The aim of this study is to develop a new software tool for 3D dose verification using $PRESAGE^{REU}$ Gel dosimeter. The tool included following functions: importing 3D doses from treatment planning systems (TPS), importing 3D optical density (OD), converting ODs to doses, 3D registration between two volumetric data by translational and rotational transformations, and evaluation with 3D gamma index. To acquire correlation between ODs and doses, CT images of a $PRESAGE^{REU}$ Gel with cylindrical shape was acquired, and a volumetric modulated arc therapy (VMAT) plan was designed to give radiation doses from 1 Gy to 6 Gy to six disk-shaped virtual targets along z-axis. After the VMAT plan was delivered to the targets, 3D OD data were reconstructed from 512 projection data from $Vista^{TM}$ optical CT scanner (Modus Medical Devices Inc, Canada) per every 2 hours after irradiation. A curve for converting ODs to doses was derived by comparing TPS dose profile to OD profile along z-axis, and the 3D OD data were converted to the absorbed doses using the curve. Supra-linearity was observed between doses and ODs, and the ODs were decayed about 60% per 24 hours depending on their magnitudes. Measured doses from the $PRESAGE^{REU}$ Gel were well agreed with the TPS doses at central region, but large under-doses were observed at peripheral region at the cylindrical geometry. Gamma passing rate for 3D doses was 70.36% under the gamma criteria of 3% of dose difference and 3 mm of distance to agreement. The low passing rate was resulted from the mismatching of the refractive index between the PRESAGE gel and oil bath in the optical CT scanner. In conclusion, the developed software was useful for 3D dose verification from PRESAGE gel dosimetry, but further improvement of the Gel dosimetry system were required.

• Journal of the Korea Concrete Institute
• /
• v.22 no.2
• /
• pp.159-169
• /
• 2010

A multiphysics model analysis including moisture transport, heat transfer and solid mechanics and experiments on the normal and light weight concrete were carried out in order to study the effect of preabsorbed water in the light weight aggregates on the drying and shrinkage characteristics of concrete. Consequently, with fixed water-cement ratio, loss of water content of normal and light weight concrete were compared and the results showed that the lightweight concrete lost less moist than the normal concrete in early age and long term which was by moist supply effect. Accordingly, shrinkage strain size and distribution of lightweight concrete were decreased, and shrinkage reducing effect was efficient in early age with water cement ratio 0.3 and in both early age, and long term with water cement ratio 0.5. The comparison of analysis results and exaperimental results indicate that characteristic values of moisture transport and the relation humidity and shrinkage strain from this study are resonable for application for other differential shrinkage analysis in lightweight concrete.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.1
• /
• pp.55-62
• /
• 2012

The present paper investigates the performance of the KOH aqueous solution as an absorbent to capture carbon dioxide ($CO_2$). The chemical absorption was carried out according to consecutive reactions that are generated in the order of $K_2CO_3$ and $KHCO_3$. The overall absorption was completed with following the physical absorption. When the absorption was conducted with the KOH as the limiting reactants in batch a reactor, $K_2CO_3$ production rate was the 1st order reaction for $OH^-$. However, $KHCO_3$ generation reaction was independent of the $CO_3^{2-}$ concentration and the rate was calculated to be $0.18gCO_2/min$ for all KOH absorbents, which is the same value of the reaction rate using $K_2CO_3$ aqueous solution as the absorbents. The overall $CO_2$ capture ratio of the 5% KOH absorbent was estimated to be 19% and the individual value in section 1 and 2 was 57 and 12%, respectively. The amount of $CO_2$ absorbed in the solution was very slightly less than the theoretical value, which was ascribed to the side reaction that produces $K_2CO_3{\cdot}KHCO_3{\cdot}1.5H_2O$ during the reaction and the consequent diminish in $CO_2$ absorption in the KOH solution.

• Journal of Korea Multimedia Society
• /
• v.12 no.9
• /
• pp.1233-1241
• /
• 2009

Over the 50 percents of women who are older than 45 years have osteoporosis. Because people hardly recognize this disease by themselves, the researches that measure bone mineral density have been doing widely to detect osteoporosis in the early stage. The most widely used methods for bone mineral density measurement are based on the X-ray imaging. Among them, DEXA(Dual-energy X-ray Absorptiometry) imaging is one of the important methods in bone mineral density measurement. DEXA images are useful methods to increase diagnosis efficiency by reducing anatomic noise as two images obtained from two different energy levels. However, it has some problems to a calibration parameter determined by the heuristic method for bone extraction. In this paper, we propose the method to extract bone in DEXA image using calibration parameter based on anatomic attenuation coefficient. The experimental results reveal that the proposed method is effective.

• Electrical & Electronic Materials
• /
• v.6 no.6
• /
• pp.514-522
• /
• 1993

본 연구에서는 Ag/ 첨가에 의한 YB $a_{2}$C $u_{3}$ $O_{7-{\delta}}$산화물의 초전도 특성 변화를 조사하였다. Ag가 첨가된 YB $a_{2}$C $u_{3-x}$A $g_{x}$ $O_{7-{\delta}}$ 산화물 시료를 만들고 이 시료들에 대한 X-ray 회절분석, IR흡수 스펙트럼분석, 임계온도(Tc)측정 및 자화(M-H)특성 측정등을 통하여 제조된 시료의 물리적 성질을 조사하였다. X-ray 회절실험 결과로 부터 x.leq.0.03인 경우에는 YB $a_{2}$C $u_{3-x}$A $g_{x}$ $O_{7-{\delta}}$가 단일상의 물질로 존재하고 x가 증가함에 따라 불순물상( $Y_{2}$ $O_{3}$, 순Ag)이 나타남을 알 수 있었다. IR흡수의 실험결과에서 Cu와 치환되어 들어간 Ag의 Ag-O 결합에 의한 흡수 스펙트럼(670$cm^{-1}$ /)이 관측되었다. 실험 결과로 부터 치환된 Ag의 양 x가 증가함에 따라 Tc가 조금씩 낮아지는 경향이 있었으며 자화의 세기 및 임계자장( $H_{C2}$)은 급격히 감소함을 알 수 있었고 또 M-H특성곡선에는 히스테리시스 특성이 나타났다.났다..났다.다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.58.1-58.1
• /
• 2011

CIS(CuInSe2)계 화합물 태양전지는 높은 광흡수계수와 열적 안정성으로 고효율 태양전지 제조가 가능하여 태양전지용 광흡수층으로 매우 이상적이다. 미국 NREL에서는 이러한 CIGS 태양전지를 Co-evaporation 방법으로 제조 20%이상의 에너지 변환 효율을 달성하였다고 보고하였다. CIGS 태양전지의 경우 기존의 유리 기판 대신 유연한 철강 기판을 사용해 태양 전지를 flexible하게 제조 할 수 있다는 장점이 있다. 이러한 flexible 태양전지의 경우 기존의 rigid 태양전지의 적용분야 뿐만 아니라 BIPV, 선박, 장난감, 군용, 자동차등 더욱 더 많은 분야에 활용이 가능하다. 본 연구에서는 기존의 rigid한 기판인 soda lime glass와 flexible 기판인 stainless steel 기판으로 소자를 제조하여 효율을 비교 분석 및 stainless steel 기판의 표면 처리 방법에 따라서 표면 조도의 특성을 분석하여 stainless steel 기판별 효율 특성도 비교 분석 하였다. 후면전극으로는 약 $1{\mu}m$의 Mo를 DC Sputtering 방법을 이용하여 증착하였고, CIGS 광흡수층은 약 $2.5{\mu}m$의 두께로 미국의 NREL과 같은 3 stage 방식을 이용하여 광흡수층을 Co-Evaporation 방법으로 제조하였고, 버퍼층인CdS는 약 50nm의 두께로 CBD 방법으로 제조 하였으며, 창층인 ZnO는 약 500nm 두께로 RF Sputtering 방법으로 제조 하였고, 마지막으로 약 $1{\mu}m$ 두께의 Al 전면전극은 Thermal Evaporation 방법으로 제조 하였다. 소자의 물리적, 전기적 특성을 분석하기위해 FE-SEM, AFM, Solar Cell Simulator 분석을 실시하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.668-668
• /
• 2013

CIGS 박막태양전지는 다른 박막태양전지에 비해 높은 에너지 변환효율을 보이고 있으며, 광범위한 기술 응용분야를 가지고 있다. CIGS를 광흡수층으로 하는 태양전지의 구조는 5개의 단위박막(배면전극, 광흡수층, 버퍼층, 앞면 투명전극, 반사방지막)을 순차적으로 형성시켜 만든다. 단위박막별로 다양한 종류의 재료와 조성, 또한 제조방법에서는 갖가지 물리적, 화학적 박막 제조방법이 사용된다. 현재 광흡수층인 CIGS층의 경우 동시증발법과 스퍼터링법이 높은 효율을 보이고 있다. 본 연구에서는 CIGS층을 3-stage process를 적용한 동시증발법을 사용하였고, Fluxmeter와 기판후면 온도 모니터링을 이용하여 제조하였으며, 버퍼층은 moving 스퍼터링 법으로 ZnS를 증착하였고, 투명전극층은 PLD (Pulsed Laser Deposition)를 이용하여 제조하였다. 가장 높은 광변환효율을 보인 Al/ZnO/CdS/Mo/SLG박막시료는 유효면적 0.45 $cm^2$에 광변환효율 15.71%, Jsc: 33.64 mA/$cm^2$, Voc: 0.64 V, FF: 73.18%를 얻을 수 있었으며, CdS를 ZnS로 대체한 Al/ZnO/ZnS/Mo/SLG 박막시료는 유효면적 0.45 $cm^2$에 광변환효율 12.13%, Jsc: 33.22 mA/$cm^2$, Voc: 0.60 V, FF: 62.85%를 얻을 수 있었다.

• Journal of the Korean Vacuum Society
• /
• v.17 no.6
• /
• pp.501-510
• /
• 2008

The stealth technology to conceal an aircraft from the vision of a radar have been accomplished by coating the surface with special paints absorbing the electromagnetic wave. Nowadays, researches to utilize characteristics of the plasma-wave interaction for realizing the stealth technology are actively progressed. In this paper, to investigate the physical feasibility of the plasma stealth, calculation results for the required conditions of the plasma cloaking on the aircraft flying in the air for showing the stealth function, using a flat non-magnetized non-uniform plasma model, are reported and discussed.