• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.205-205
• /
• 2020

도시화로 인해 불투수층의 증가는 강우시 유출을 증가시켜 물순환을 왜곡시키고 다양한 오염물질을 수계로 배출시켜 수질악화 및 수생태계를 훼손시킨다. 이러한 환경 수문학적 문제를 해결하기 위하여 침투, 여과, 저류 등의 물리적 기작, 식생 및 토양의 생물학적 기작을 이용한 LID 기술을 적용하고 있다. LID 시설에 적용되는 식물은 심미적, 경관성을 증대시켜주나, 다량의 오염물질이 유입될 경우 일부 식물의 고사를 유발한다. 따라서 본 연구는 LID 시설내 식물 체내 중금속 농도를 파악하고자 수행하였다. 본 연구는 지붕 강우유출수를 처리를 위해 설치된 LID 시설(침투화분) 모니터링 대상 지점으로 선정하였으며, 패랭이(Dianthus chinensis)와 조팝나무(Spiraea fritschiana)가 식재되어있다. LID 시설 내 식재된 식물과의 비교를 위해 패랭이와 조팝나무가 식재된 화단을 각각 대조군으로 선정하였다. 패랭이는 잎과 뿌리, 조팝나무는 줄기와 잔가지로 구분하여 체내 중금속 함량에 대해 분석을 수행하였다. 중금속 분석은 토질오염공정시험기준에 의해 Fe, Ni, Zn, As를 분석하였다. 연구결과, LID 시설에 적용된 식생과 대조군 식생의 체내 Fe 농도는 패랭이(1176.9~3804.6mg/kg), 조팝나무(218.4~342.5mg/kg)이며, Ni의 경우 패랭이(13.3~21.4mg/kg), 조팝나무(7.2~12.5mg/kg) Zn은 패랭이(33.6~160.5mg/kg), 조팝나무(46.1~243.2mg/kg), As는 패랭이(7.3~37.3mg/kg), 조팝나무(1.9~8.7mg/kg)로 대조군에 비해 유사하거나 높은 값을 보이는 것으로 분석되었다. 또한, LID 시설에 식재된 조팝나무는 대조군에 비해 줄기는 약 26배, 잔가지 19배 이상 높은 농도를 보이는 것으로 나타났으나, 중금속 농도의 차이는 식물의 중금속 흡수 혹은 토양의 중금속 흡착능력이 토양의 종류, 특성에 따라 다를 수 있기 때문에 모니터링 환경에 따라 편차가 존재할 것으로 판단된다.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2022.09a
• /
• pp.67-67
• /
• 2022

먹넌출은 국내에서 안면도에서만 자생하는 희귀식물로, 항산화, 미백, 항암 효능이 밝혀져 유용식물자원으로의 활용이 기대되나 IUCN(세계자연보전연맹) 기준 취약종(VU)으로 분류되어 생명자원의 현지 내, 현지외 보존 필요성이 크다. 따라서 본 연구는 먹넌출의 종자를 이용한 보존과 증식을 위해 기초자료를 확보하고자 하였다. 이를 위해 열매의 성숙도에 따른 형태적 특성과 활력 차이를 비교하고, 종자의 발아 조건 구명을 위해 휴면 종류와 발아 적온을 조사하였다. 먼저 열매 성숙도에 따른 형태적 특성과 활력 조사 결과, 열매가 부분적으로 성숙한 적색 단계는 완전히 성숙한 흑색 단계와 비교하여 종자 무게와 배길이에서 차이가 거의 나타나지 않았고 충실도가 80%, 충실 종자의 활력이 100%로 나타났다. 따라서 종자 채취 시 열매가 흑색으로 성숙하여 떨어지기 전인 적색 단계에서 채취하여도 종자를 이용한 증식에 문제가 없을 것으로 보인다. 또한 먹넌출 종자는 딱딱한 과피로 덮여있지만 수분 흡수를 가능하게 하는 조직을 가지고 있어 물리적 휴면에 해당하지 않았으나 생리적 휴면을 가지고 있었으며, 휴면 타파에는 GA3 1000ppm 처리가 가장 효과적이었다. 또한 발아 온도는 10℃ 12시간, 20℃ 12시간인 변온 조건에서 가장 높은 발아율을 보였다. 본 결과를 먹넌출 종자 수집과 증식에 참고 자료로 활용할 수 있을 것으로 기대한다.

• Food Science and Preservation
• /
• v.22 no.2
• /
• pp.225-231
• /
• 2015

This study was conducted to examine the physicochemical properties and micro-encapsulation process of rice fermented with Bacillus subtilis CBD2. The viable bacterial cell, pH, and amylase activity of the rice liquid culture were 7.61 log CFU/mL, pH 5.08 and 159.43 units/mL, respectively. The micro-encapsulated rice liquid culture was manufactured via spray drying with different forming agents: i.e., alginic acid 1.0% and chitosan 0.3%, 0.5%, and 1.0%. The moisture contents of the spray-dried powders were approximately 2.90~3.68%. The color of the L and a value decreased whereas that of the b and ${\Delta}E$ value increased. The particle size and outer topology of the spray-dried rice liquid culture were $48.13{\sim}68.48{\mu}m$ and globular, respectively. The water absorption index of the spray-dried powder (2.40~2.65) was lower than that of the freeze-dried powder (2.66). The water solubility index of the spray-dried powder (9.17~10.89%) was higher than that of the freeze-dried powder (7.12%). The in vitro dissolution was measured for five hours in pH 1.2 simulated gastric fluid, and pH 6.8 and pH 7.4 simulated intestinal fluids, using a dissolution tester at $37^{\circ}C$ with 50 rpm agitation. The amylase survival in the fermented rice was 85.93% through the spray-drying and it was very effectively controlled.

• Progress in Medical Physics
• /
• v.25 no.3
• /
• pp.139-142
• /
• 2014

The purpose of this study was to develop a system of clinical application of reconstructed dose that includes dose reconstruction, reconstructed dose registration between fractions of treatment, and dose-volume-histogram generation and to demonstrate the system on a deformable prostate phantom. To achieve this purpose, a deformable prostate phantom was embedded into a 20 cm-deep and 40 cm-wide water phantom. The phantom was CT scanned and the anatomical models of prostate, seminal vesicles, and rectum were contoured. A coplanar 4-field intensity modulated radiation therapy (IMRT) plan was used for this study. Organ deformation was simulated by inserting a "transrectal" balloon containing 20 ml of water. A new CT scan was obtained and the deformed structures were contoured. Dose responses in phantoms and electronic portal imaging device (EPID) were calculated by using the XVMC Monte Carlo code. The IMRT plan was delivered to the two phantoms and integrated EPID images were respectively acquired. Dose reconstruction was performed on these images using the calculated responses. The deformed phantom was registered to the original phantom using an in-house developed software based on the Demons algorithm. The transfer matrix for each voxel was obtained and used to correlate the two sets of the reconstructed dose to generate a cumulative reconstructed dose on the original phantom. Forwardly calculated planning dose in the original phantom was compared to the cumulative reconstructed dose from EPID in the original phantom. The prescribed 200 cGy isodose lines showed little difference with respect to the "prostate" and "seminal vesicles", but appreciable difference (3%) was observed at the dose level greater than 210 cGy. In the rectum, the reconstructed dose showed lower volume coverage by a few percent than the plan dose in the dose range of 150 to 200 cGy. Through this study, the system of clinical application of reconstructed dose was successfully developed and demonstrated. The organ deformation simulated in this study resulted in small but observable dose changes in the target and critical structure.

• Progress in Medical Physics
• /
• v.27 no.1
• /
• pp.14-24
• /
• 2016

Since the head and neck region is densely located with organs at risk (OAR), OAR-sparing is an important issue in the treatment of head and neck cancers. This study-in which different treatment plans were performed varying the head tilt angle on brain tumor patients-investigates the optimal head elevation angle for sparing normal organs (e.g. the hippocampus) and further compares the dosimetric characteristics of different types of radiation equipment. we performed 3D conformal radiation therapy (3D-CRT), intensity-modulated radiation therapy (IMRT), and tomotherapy on 10 patients with brain tumors in the frontal lobe while varying the head tilt angle of patients to analyze the dosimetric characteristics of different therapy methods. In each treatment plan, 95% of the tumor volume was irradiated with a dose of 40 Gy in 10 fractions. The step and shoot technique with nine beams was used for IMRT, and the same prescription dose was delivered to the tumor volume for the 3D-CRT and tomotherapy plans. The homogeneity index, conformity index, and normal tissue complication probability (NTCP) were calculated. At a head elevation angle of $30^{\circ}$, conformity of the isodose curve to the target increased on average by 53%, 8%, and 5.4%. In 3D-CRT, the maximum dose received by the brain stem decreased at $15^{\circ}$, $30^{\circ}$, and $40^{\circ}$, compared to that observed at $0^{\circ}$. The NTCP value of the hippocampus observed in each modality was the highest at a head and neck angle of $0^{\circ}$ and the lowest at $30^{\circ}$. This study demonstrates that the elevation of the patients' head tilt angle in radiation therapy improves the target region's homogeneity of dose distribution by increasing the tumor control rate and conformity of the isodose curve to the target. Moreover, the study shows that the elevation of the head tilt angle lowers the NTCP by separating the tumor volume from the normal tissues, which helps spare OARs and reduce the delivered dose to the hippocampus.

• Progress in Medical Physics
• /
• v.20 no.4
• /
• pp.235-243
• /
• 2009

The purpose of this experiment is to know the relation of the detection and characterization of liver's diseases as comparison of finding at MR imaging using a Ferucarbotran (SPIO) and Gd-EOB-DTPA (Primovist) agents in diffuse liver disease. A total of 50 patients (25 men and 25 women, mean age: 50 years) with liver diseases were investigated at 3.0T machine (GE, General Electric Medical System, Excite HD) "with 8 Ch body coil for comparison of diseases and contrast's uptake relation, which used the LAVA, MGRE." All images were performed on the same location with before and after Ferucarbotran and Gd-EOB-DTPA administrations (p<0.05). Contrast to noise ratio of Ferucarbotran and Gd-EOB-DTPA in the HCC were $3.08{\pm}0.12$ and $7.00{\pm}0.27$ with MGRE and LAVA pulse sequence, $3.62{\pm}0.13$ and $2.60{\pm}0.23$ in the hyper-plastic nodule, $1.70{\pm}0.09$ and $2.60{\pm}0.23$ in the meta, $2.12{\pm}0.28$ and $5.86{\pm}0.28$ in the FNH, $4.45{\pm}0.28$ and $1.73{\pm}0.02$ in the abscess and ANOVA test was used to evaluate the diagnostic performance of each disease (p<0.05). In conclusions, two techniques were well demonstrated with the relation of the detection and characterization of liver's diseases.

• Progress in Medical Physics
• /
• v.20 no.4
• /
• pp.308-316
• /
• 2009

To achieve the accurate evaluation of given absorbed dose from output dose of linear accelerator photon beam through investigate the characteristics of LiF:Mg,Cu,P TLD powder. This experimental TL phosphor is performed with a commercial LiF:Mg,Cu,P powder (Supplied by PTW) and TL reader (LTM, France). The TLD was exposed to 6 MV X rays of linear accelerator photon beam with range 15 to 800 cGy in blind dose at two hospitals. The dose evaluation of TLD was through the experimental algorithms which were dose dependency, dose rate dependency, fading and powder weight dependency. The glow curve has shown the three peaks which are 110, 183 and 232 degrees of heating temperature and the main dosimetric peak showed highest TL response at 232 high temperature. In this experiments, the LiF:Mg,Cu,P phosphor has shown the 2.5 eV of electron trap energy with a second order. This experiments guided the dose evaluation accuracy is within 1% +2.58% of discrepancy. The TLD powder of LiF:Mg,Cu,P was analyzed to dosimetric characterists of electron captured energy and order by glow shape, and dose-TL response curve guided the accuracy within 1.0+2.58% of output dose discrepancy.

• Journal of Sericultural and Entomological Science
• /
• v.36 no.2
• /
• pp.138-146
• /
• 1994

The structural characteristics of Antheraea yamamai and Antheraea pernyi silk were investigated by using x-ray diffraction method, IR spectroscopy and polarizing microscopy. The amino acid composition, fiber density, thermal decomposition temperature and glass transition temperature were also measured for relating these physical properties to the structure in comparison with those of Bombyx mori silk fiber. There was no significant structural difference between A. yamamai and A. pernyi silk fiber on an examination of x-ray diffraction curve and IR spectrum. Both of these wild silk fibers showed double diffraction peaks at the Bragg angle 2Θ16.7˚ and 20.5˚by x-ray diffraction analysis as well as IR absorption peaks for the bending vibration of specific groups related to ala-ala amino acid sequence. On the other hand, the x-ray diffraction curve and IR spectrum of Bombyx mori silk fiber are different from those of wild silk fibers, indicating different crystal structure as well as amino acid sequences. It showed under the polarizing microscope examination that the birefringence and optical orientation factor of wild silk fibers are much lower than those of B. mori silk. Also, the surface of degummed wild silk fibers was characterized by the longitudinal stripes of microfibrils in the direction of fiber axies. The amino acid composition, which is strongly related to the fine structure and properties, was not significantly different between these two wild silk fibers. However, the alanine content was somewhat less and polar amino acid content more for A. yamamai. As a result of fiber density measurement, the specific gravities of B. mori, A. pernyi and A. yamamai were 1.355~1.356, 1.308~1.311, 1.265~1.301g/㎤ in the order, respectively. The calculated crystallinity(%) was 64% for B. mori and 51~52% for wild silk fibers, which showed same trend by IR method in spite of somewhat higher value. The thermal decomposition behaviour was examined by DSC and TGA, showing that the degradation temperature was in the order of B mori, A. prernyi and A. yamamai at around 350$^{\circ}C$. It was also observed by TGA that the decomposition seems to proceed step by step according to their specific regions in the fiber structure, resulting the difference in their thermal stabilities. The glass transition temperature was turned out to be 220$^{\circ}C$ for B. mori, 240$^{\circ}C$ A. yamamai and 255$^{\circ}C$ A. pernyi by the dynamic mechanical analysis. It is expected that the chemical properties are affected by the dynamic mechanical behavior in accordance with their structural characters.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.5
• /
• pp.772-778
• /
• 2012

In order to develop the application method of compost manure (CM) and liquid manure (LM) for rice cultivation, experiments were conducted at silty loam paddy field in Gochang, Jeonbuk, a LM applied rate as N%; non-application, chemical fertilizer (CF) 100%, CM 50%+LM 50%, CM 30%+CF 70% and CM 30%+LM 70% as basal and additional fertilizer. $NH_4^+$-N content in paddy soil was higher with CF 100% application than the split application of compost and liquid pig manure fertilizer during the early stage of rice growth. However, there was no significant difference in the later part of rice growth. Amount of $NO_3^-$-N in leachate was decreased in CM 30%+LM 70% and CM 30%+CF 70% split applications compared to CF 100%. Amounts of OM and Avail $P_2O_5$, Exch. cations in soil of experiment after were highest with the split application of CM 50%+LM 50% and CM 30%+LM 70%. Amount of nutrient uptake of plants were no significant difference between the split application plots of CM and LM, but nitrogen utilization rate was 66% in average CM 50%+LM 50% and CM 30%+LM 70% to compared CF 100%. The rice yield of CM 50%+LM 50% was lower (90%) comparing that of CF 100% ($557kg\;10a^{-1}$). But the yield in CM 30%+CF 70% and CM 30%+LM 70% reached 96% in average, which did not show significant difference with that of CF 100%. Accordingly, LM 70% or CF 70% split application after CM 30% application was helpful in enhancing the physicochemical property of soil as well as reducing CF. It could be evaluated that this application in segmentation was better in productivity improvement and soil pollution reduction than the esinultaneous application of LM 100% in terms of split application in times of requirement for plants.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.10
• /
• pp.1664-1672
• /
• 2013

Solar salt is manufactured naturally, and therefore, it contains insoluble substances such as sandy compounds. This study is performed in order to effectively produce clean sea salt by removing the impurities in sea salt through filtration and evaporation in a vacuum condition. Brine was concentrated and crystallized at $90^{\circ}C$ by a rotary vacuum evaporator, which was then recovered as salt crystals by filtration, and then the salt was dehydrated. Manufacturing yields were determined by the amount of water evaporation. Brine was concentrated to 40%, 50% and 60% of the initial volume of brine and manufactured salt were designated as 40S, 50S and 60S, respectively. The salt produced by this process is called ESBS (evaporated salt with brine from salt-farm). The yield of 40S, 50S and 60S were 7.22%, 10.79% and 15.06%, respectively. The NaCl concentration of 40S and 50S were 90.38% and 91.16%, respectively. From a sensory evaluation analysis, the most tasty salt was 40S and the bitter salt was 60S. The average contents of sand compound and insoluble substances in ESBS were 0.001~0.012% and 0.067~0.12%, respectively. The mineral compositions, such as Na, Mg, K, and Ca of 40S and 50S were similar with those of the natural solar salt. In solubility tests, the solubility (g of salt/100 mL $H_2O$/sec) of 40S, 50S, and 60S was 0.69, 0.70, and 0.69, respectively. On the other hand, the solubility of natural solar salt was 0.47. By comparing the water reabsorption rate analysis results, water reabsorption rate of 40S and 50S was about 3 to 5 times lower than that of the solar salt. In the aspects of physical and chemical properties, such as minerals, impurities, solubility and moisture re-absorption rate, salts developed in this study are judged to be better than that of the general solar salt.