• Food Science and Preservation
• /
• v.10 no.1
• /
• pp.11-15
• /
• 2003

Various quality characteristics of minimally processed mushroom were measured to select appropriate browning inhibitor. The treatment of extracts from Asparagi radix, cassia and kiwi on mushrooms have a high effectiveness like ascorbic acid or cysteine, known as a good chemical antibrowning agent. As a results of physical quality characteristics of minimally processed mushroom during storage, 1% cysteine and Asparagi radix were highly effective on degree of browning. Total phenol content and polyphenol oxidase activity showed slight differences among the mushroom treated with each browning inhibitors, but it has gradually increased during storage. Thus, these results suggest browning inhibitors from natural materials can be alternatives to prevent browning on mushrooms instead of chemical browning inhibitors including ascorbic acid or cysteine, has been widely used for antibrowning agent.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.32.4-33
• /
• 2016

활동성은하핵(AGN)의 거대 블랙홀 주변에 존재하는 플라스마 디스크의 구조나 물리적인 상태를 관측으로 직접 찾는 것은 AGN 중심부분에서의 제트 형성, 방출과정이나 에너지 수송과정을 조사하기 위해 중요한다. 지금껏 주로 센치미터파장 영역의 다주파 VLBI 관측으로 우리은하에서 가까운 AGN 속에 존재하는 10 pc 정도의 플라스마 디스크가 발견되어 있다만, AGN의 활동성을 정하고 있는 1 pc 이하의 스케일에서의 디스크 구조를 직접 관측한 결과는 아직 없다. 우리는 2015년8월부터 KVN 및 KVN과 일본 VERA로 구성되는 한일공동 VLBI 관측망(KaVA)을 이용해서 전파 은하 3C 84(z = 0.0176, 1 mas = 0.36 pc)의 밀리미터파장 모니터링을 진행하고 있다. KVN과 KaVA를 이용하면 1 pc 이하의 스케일로 3C 84의 중심구조를 고감도에서 분해할 수 있다. 이번 발표에서는 KVN 및 KaVA로 거의 동시에 실시한 관측결과를 중심으로 보고한다. 관측은 2016년2월22일(KaVA 43 GHz) 및 23일(KVN 86 GHz)에 실시되었다. 양 주파수의 이미지에서 종래의 센치미터 ~ 밀리미터파장 VLBI관측으로도 검출되어 있는 중심핵(C1) 및 남쪽에 약 3 mas 떨어져서 위치하는 로브(C3) 성분 뿐만 아니라 C1으로부터 북쪽에 약 2.5 mas 떨어져서 위치하는 새로운 성분(N1)을 검출하였다. N1의 검출 수준은 43, 86 GHz 모두 $6{\sigma}$이며, 양 주파수 사이에서 광학적으로 두꺼운 스펙트럼을 가지고 있다. 과거의 관측으로 측정된 C3의 겉보기 속도는 빛의 속도의 약 23%이며, 남북 로브의 구조와 운동의 대칭을 가정하면 N1이 도플러 분사출 효과 때문에 어두워지고 있는 가능성은 낮다. 따라서 C3에 대응하는 북쪽 N1로브로부터의 복사가 블랙홀 주변의 플라스마 디스크로 인해 저주파수에서 강한 흡수를 받고 있는 결과고 생각된다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.111-111
• /
• 2008

태양전지는 태양에너지를 직접 전기에너지로 변환시켜주는 광전 소자로서 구조적으로 단순하고 제조 공정도 비교적 간단하지만, 실용화를 위해서는 비용적인 측면이 많은 걸림돌이 되고 있다. 기존의 실리콘 태양전지는 낮은 광흡수율, 고비용임에도 불구하고 가장 많이 활용되고 있는 태양전지 기술이다. 그러나 태양전지의 경제성 향상과 실용화를 위해서는 기존의 실리콘 태양전지 보다 고효율 및 고신뢰도의 박막형 태양전지의 개발이 필요하다. 박막헝 태양전지의 재료로는 비정질 실리콘, 다결정 실리콘. CIGS, CdTe 등이 있다. 그 중에서도 박막형 태양전지에 광흡수층 물질로는 밴드갭 에너지 (l.4eV 부근), 변환 효율, 경제성 등을 고려했을 때 II-VI족 화합물인 CdTe가 가장 적합한 것으로 각광받고 있다. 하지만 아직까지 실리콘 태양전지에 비해 효율이 많이 떨어지는 단점을 가지고 있기 때문에 효율을 더 끌어올리기 위한 연구가 활발히 진행되고 있는 실정이다. 또한 CMP(chemical mechanical polishing) 공정은 반도체 박막 분야뿐만 아니라 물리, 화학 반응의 기초 연구에도 널리 응용이 되는 기술로써, 시료와 연마 패드 사이의 회전마찰에 의한 기계적 연마와 연마제 (abrasive) 에 의한 화학적 에칭으로 박막 표면을 평탄화하는 기술이다. 본 연구에서는 sputtering 법에 의해 증착된 CdTe 박막에 CMP 공정을 적용하여 표면 특성을 개선한 뒤 태양전지 변환 효율과 직접적인 연관성을 가지고 있는 표면 및 광특성의 변화를 CMP 공정 전과 후로 비교하였다. 표면의 변화를 관찰하기 위해서 AFM(atomic forced microscope) 과 SEM(scanning electron microscopy) 을 이용하였으며, 광특성의 비교를 위해서 흡수율과 PL특성을 측정하였다.

• Journal of the Korea Concrete Institute
• /
• v.18 no.3 s.93
• /
• pp.371-378
• /
• 2006

Recently sewage facilities mainly consisted of concrete structures are being deteriorated seriously by biodeterioration originated from sulfur-oxidizing bacteria. In this study, to prevent biochemical corrosion of the sewer concrete, antibiotics which prevent growth of sulfur-oxidizing bacteria were developed and antimicrobial performance of it was investigated. After that, to consider applicability of antibiotics to concrete, physical properties of concrete covered with antibiotics were investigated. As a results of the study, it was proved that the antimicrobial performance of antibiotics was available. Also compressive strength and bond strength of concrete didn't closely connected with antibiotics, and resistance to abrasion, water absorption, air permeability, carbonation, salt damage and chemical attack of concrete was improved remarkably by covering with it.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.4
• /
• pp.52-57
• /
• 1984

The electrical properties and their instability of InP tunnel MIS diodes fabricated by inserting the chemically grown oxide between metal and n-lnP (100) surface have been in-vestigated. The structure of the gown oxide was the mixture of In2O3 and P2O5, as was other low-temperature grown oxide, and its thickness was estimated to be the order of 200 $A^{\circ}$. The forward and reverse currents increased even with slight heat treatment of diodes in vacuum, and they were reduced when the diodes were exposed to humid ambient. It was discussed that the observed instability in I-V characteristics is due to a change of the physicochemical properties of the oxide film and of the interface states between oxide and InP according to the absorption of H2O.

• Applied Chemistry for Engineering
• /
• v.8 no.1
• /
• pp.29-38
• /
• 1997

In the w/o concentrated emulsion, the volume fraction of the dispersed is greater than 0.74 and the hydrophilic liquid is dispersed in the hydrophobic liquid of the continuous phase. The emulsion has the same appearance and behaviour as a gel. The polarity of the hydrophilic liquids and hydrophobic liquids, the pH and the ionic strength of the hydrophilic liquid are found to be important factors in the stability at the polymerization temperature such as $50^{\circ}C$. The lower the polarity of the hydrophobic liquid and the higher the polarity of the hydrophilic liquid, the more stable the emulsion. Electron microscopy studies of the hydrophilic-hydrophobic polymer composites show that the particles of polyacrylamide, the dispersed phase, are separated by he network of the thin film of polystyrene, the continuous phase. This hydrophilic-hydrophobic polymer composites show higher permselectivity to water in the mixture of water-ethanol. The pervaporation experiment shows that the selectivity of the membrane ranges between 4-40 and increases with increasing enthanol concentration in the feed. The rate of permeation decreases with increasing ethanol concentration in the feed.

• Korean journal of food and cookery science
• /
• v.14 no.2
• /
• pp.140-147
• /
• 1998

The rheological properties of dough made from composite flour containing 30% of buckwheat flour with 80% of extraction rate and 70% of wheat flour, with addition of vital wheat gluten and/or gums, were studied for the development of buckwheat bread. From the farinograph data, water absorption, development time, and stability of the dough decreased as the amount of buckwheat flour increased. However, the addition of gluten increased the water absorption and development time but decreased the weakness of the dough. The use of xanthan gum showed a stability-increasing effect. From the extensograph data, extension and strength of the dough decreased with increasing amount of buckwheat flour, but resistance to extension increased. The addition of gluten increased the extension and strength of the dough, but decreased the resistance to extension. Guar and xanthan gum added at 0.2% level had little effect on extensograph data of the dough. Overall, addition of, vital wheat gluten improved the properties of buckwheat bread dough better than water-soluble gums.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.1
• /
• pp.10-15
• /
• 1987

The experiment was designed to determine the proper shading rate and shading materials to decrease the excessive dried leaves during cure of burley tobacco. Five shading rates and seaven shading materials were applied on the pipe vinyl house from initial stage or yellow stage of cure. Temperature was lower and weight-loss of leaves delayed with shading from initial stage to browning stage of cure. Excessive dried leave were largely decreased as shading rate was increased to 70%. However, at shading rate more than 70%, its decreasing extent was fewer. Price per kg and physical properties improved considerably at shading rate of 50%. Shading materials alone could not completely prevent excessive dried leaves but it could decrease them. Orange, white and purple color vinyl among shading materials had so effects of shading as the black shading cloth during curing. However, white color vinyl didn't endure more than a few months due to sunshine. A difference of light quality in visible light was no significance on air curing.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.4
• /
• pp.1-10
• /
• 2001

Chip-on-glass(COG) mounting of area array electronic packages was attempted by heating the rear surface of a contact pad film deposited on a glass substrate. The pads consisted of an adhesion (i.e. Cr or Ti) and a top coating layer(i.e. Ni or Cu) were healed by the UV laser beam transmitted through the glass substrate. The lather energy absorbed on the pad raised the temperature of a solder ball which is in physical contact with the pad, and formed a reflowed solder bump. The effects of the adhesion and top coating layer on the laser reflow soldering were studied by measuring temperature profile of the ball during the laser heating process. The results were discussed based on the measurement of reflectivity of the adhesion layer. In addition, the microstructures of solder bumps and their mechanical properties were examined.

• Polymer(Korea)
• /
• v.28 no.2
• /
• pp.194-200
• /
• 2004

Porcine small intestine submucosa (SIS) has been widely used as a biomaterial without immunorejection responses. Crosslinked SIS sponges were characterized for the possibility of the bio-interactive wound dressings and tissue engineered scaffolds. SIS powders were dissolved in 3% acetic acid aqueous solution at 48hrs followed by pouring into mold and then fabricated by freeze-drying method. SIS sponge was prepared by crosslinked with 1-ethyl-(3-3-dimethyl aminopropyl) carbodiimide hydrochloride (EDC) solution (deionized water: ethanol=5:95) with 1-100mM concentration for 24 hrs and Iyophilized. SIS sponges were characterized by scanning electron microscopy, differential scanning calorimeter, and Fourier transform infrared spectrometer and were tested their porosity and water absorption ability. It was observed that the concentration of EDC might be exceeded 50 mM to get good physical characteristics. In conclusion, it seems that SIS sponge could be very useful for the applications of wound healing and tissue construction.