• The Journal of the Korea Contents Association
• /
• v.13 no.1
• /
• pp.30-39
• /
• 2013

In recent years, with the development of devices to collect multimedia data such as small CMOS camera sensor and micro phone, studies on wireless multimedia sensor network technologies and their applications that extend the existing wireless sensor network technologies have been actively done. In such applications, various basic schemes such as the processing, storage, and transmission of multimedia data are required. Especially, a security for real world environments is essential. In this paper, in order to defend the sniffing attack in various hacking techniques, we propose a multipath routing scheme for physically avoiding the data transmission path from the risk factors. Our proposed scheme establishes the DEFCON of the sensor nodes that are geographically close to risk factors and the priorities according to the importance of the data. Our proposed scheme performs risk factor detour multipath routing through a safe path considering the DEFCON and data priority. Our experimental results show that although our proposed scheme takes the transmission delay time by about 5% over the existing scheme, it reduces the eavesdropping rate that can attack and intercept data by the risk factor by about 18%.

• The KIPS Transactions:PartC
• /
• v.11C no.3
• /
• pp.361-370
• /
• 2004

All active nudes which have no physically direct connection with each other in If network must be able to compose and manage network topology Informations. Besides one active program can be performed by the active nodes when every active packet for this program is transmitted without any loss of packets. Also the active packets should be transmitted effectively to minimize the transmission delay and securely from threatens. In this thesis, the discovery scheme of active nodes is adapted for active nodes in IP networks to compose and manage the topology information. The scheme for the efficient, reliable and secure transmission of active packets is also proposed. The sequence number is assigned to every active packet. If a receiver detects the loss of active packet checking the sequence number, the receiver requests the retransmission of the lost packet to the previous active node. kiter receiving an active packet and adapting security and reliability schemes, intermediate active nodes not only copy and send the Packet Instantly but also apply some suity mechanisms to it. And the active packet transmission engine is proposed to provide these transmission schemes The simulation of the adapted active node discovery scheme and the proposed active packet transmission engine is performed. The simulation results show that the adapted active node discovery scheme is efficient and the proposed active engine has the low latency and the high performance.

• The KIPS Transactions:PartC
• /
• v.17C no.1
• /
• pp.1-14
• /
• 2010

IEEE 802.15.4[1] has been standardized for the physical layer and MAC layer of LR-PANs(Low Rate-Wireless Personal Area Networks) as a technology for operations with low power on sensor networks. The standardization is applied to the variety of applications in the shortrange wireless communication with limited output and performance, for example wireless sensor or virtual wire, but it includes vulnerabilities for various attacks because of the lack of security researches. In this paper, we analyze the vulnerabilities against the denial of sleep attacks on the MAC layer of IEEE 802.15.4, and propose a detection mechanism against it. In results, we analyzed the possibilities of denial of sleep attacks by the modification of superframe, the modification of CW(Contention Window), the process of channel scan or PAN association, and so on. Moreover, we comprehended that some of these attacks can mount even though the standardized security services such as encryption or authentication are performed. In addition to, we model for denial of sleep attacks by Beacon/Association Request messages, and propose a detection mechanism against them. This detection mechanism utilizes the management table consisting of the interval and node ID of request messages, and signal strength. In simulation results, we can show the effect of attacks, the detection possibility and performance superiorities of proposed mechanism.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.4
• /
• pp.61-74
• /
• 2012

Industrial complexes in Korea have been vigorously established by economic development plan and development policy of industry in 1960s. Recently, Korean government has promoted Eco Industrial Park (EIP) project to recycle by-products and wastes in industrial park In this study, we analyzed the physical and chemical properties for the sludges discharged from A industrial complex. And we investigated the economic feasibility and environmental impact of sludge to energy facilities. The analysis results indicated that the petrochemical industry were 92% in sludge production, the highest treatment amount was landfill, followed by incineration and recycling and then ocean disposal. Wastewater sludge and process sludge samples are collected and analyzed to use as basic data on economic feasibility and environmental impact. Weighted average heating value of sludge samples was 3,891kcal/kg. Based on this data, installation and operation costs, operation returns of operating the drying facility are estimated, compared with cogeneration facility. And this study examines how the payback period of each simulation(total 8 case) with the important parameter changes. As a result, it was found that what needs the shortest payback period is 3years with connection of drying facility and cogeneration facility based on the government's financial subsidy system.

• Journal of radiological science and technology
• /
• v.40 no.3
• /
• pp.443-451
• /
• 2017

Mammography is commonly used for screening early breast cancer. However, mammographic images, which depend on the physical properties of breast components, are limited to provide information about whether a lesion is malignant or benign. Although a dual-energy subtraction technique decomposes a certain material from a mixture, it increases radiation dose and degrades the accuracy of material decomposition. In this study, we simulated a breast phantom using attenuation characteristics, and we proposed a technique to enable the accurate material decomposition by applying weighting factors for the dual-energy mammography based on a photon-counting detector using a Monte Carlo simulation tool. We also evaluated the contrast and noise of simulated breast images for validating the proposed technique. As a result, the contrast for a malignant tumor in the dual-energy weighted subtraction technique was 0.98 and 1.06 times similar than those in the general mammography and dual-energy subtraction techniques, respectively. However the contrast between malignant and benign tumors dramatically increased 13.54 times due to the low contrast of a benign tumor. Therefore, the proposed technique can increase the material decomposition accuracy for malignant tumor and improve the diagnostic accuracy of mammography.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.8
• /
• pp.751-758
• /
• 2015

Mathematical models are actively used to reduce the experimental expenses required to understand physical phenomena. However, they are different from real phenomena because of assumptions or uncertain parameters. In this study, we present a calibration and validation method using a paper helicopter and statistical methods to quantify the uncertainty. The data from the experiment using three nominally identical paper helicopters consist of different groups, and are used to calibrate the drag coefficient, which is an unknown input parameter in both analytical models. We predict the predicted fall time data using probability distributions. We validate the analysis models by comparing the predicted distribution and the experimental data distribution. Moreover, we quantify the uncertainty using the Markov Chain Monte Carlo method. In addition, we compare the manufacturing error and experimental error obtained from the fall-time data using Analysis of Variance. As a result, all of the paper helicopters are treated as one identical model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.6
• /
• pp.1107-1114
• /
• 2004

System Packet Interface Level 4 Phase 2(SPI-4.2) is an interface for packet and cell transfer between a physical layer(PHY) device and a link layer device, for aggregate bandwidths of OC-192 ATM and Packet Over Sonet/SDH(POS), as well as 10Gbps Ethernet applications. SPI-4.2 core consists of Tx and Rx modules and supports full duplex communication. Tx module of SPI-4.2 core writes 64-bit data word and 14-bit header information from the user interface into asynchronous FIFO and transmits DDR(Double Data Rate) data over PL4 interface. Rx module of SPI-4.2 core operates in vice versa. Tx and Rx modules of SPI-4.2 core are designed to support maximum 256-channel and control the bandwidth allocation by configuring the calendar memory. Automatic DIP4 and DIP-2 parity generation and checking are implemented within the designed core. The designed core uses Xilinx ISE 5.li tool and is described in VHDL Language and is simulated by Model_SIM 5.6a. The designed core operates at 720Mbps data rate per line, which provides an aggregate bandwidth of 11.52Gbps. SPI-4.2 interface core is suited for line cards in gigabit/terabit routers, and optical cross-connect switches, and SONET/SDH-based transmission systems.

• Clean Technology
• /
• v.20 no.4
• /
• pp.398-405
• /
• 2014

In the treatment of spent high energetic materials, the issues such as environmental pollution, safety as well as working capacity should be carefully considered and well examined. In this regard, incineration has been recommended as one of the most promising processes for the disposal of such explosives. Due to the fact that high energetic materials encompass various types and their different characteristics, the technology development dealing with various materials is not an easy task. In this study, rigorous modeling and dynamic simulation was carried out to predict dynamic physico-chemical phenomena for research department explosive (RDX). Plug flow reactor was employed to describe the incinerator with 263 elementary reactions and 43 chemical species. Simulation results showed that safe operations can be achieved mainly by controlling the reactor temperature. At 1,200 K, only thermal decomposition (combustion) occurred, whereas increasing temperature to 1,300 K, caused the reaction rates to increase drastically, which led to ignition. The temperature further increased to 3,000 K which was the maximum temperature recorded for the entire process. Case studies for different operating temperatures were also executed and it was concluded that the modeling approach and simulation results will serve as a basis for the effective design and operation of RDX incinerator.

• Investigative Magnetic Resonance Imaging
• /
• v.2 no.1
• /
• pp.67-72
• /
• 1998

The mapping of the spin-spin relaxation time T2 in pixel-by-pixel was suggested as a quantitative diagnostic tool in medicine. although the CPMG pulse sequence has been known to be the best pulse sequence for T2 measurement in physics NMR, the supplied pulse sequence by the manufacture of MRI system was able to obtain the maximum of 4 CPMG images. Eight or more images with different echo time TEs are required to construct a reliable T2 map, so that two or more acquisitions were required, which easily took more than 10 minutes. 4-echo CPMG imaging pulse sequence was modified to generate the maximum of 8 MR images with evenly spaced echo time TEs. In human MR imaging, since patients tend to move at least several pixels between the different acquisitions, 8-echo CPMG imaging sequence reduces the acquisition time and may remove any mis-regitration of each pixels signal for the fitting of T2. The resultant T2 maps using the theoretically simulated images and using the MR images of the human brain suggested that 8 echo CPMG sequence with short echo spacing such as 17-20 msec can give the reliable T2 map.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1581-1586
• /
• 2010

Haptic-aided design (HAD) involves the use of a haptic simulator in place of physical prototypes in the design and development of products with which human beings interact physically. The development time and cost can be significantly reduced by adopting this HAD scheme. Although both physical and emotional factors are equally important, only the emotional factors were taken into consideration in the previous HAD process. Consequently, the design of the products was sometimes unsatisfactory from the viewpoint of ergonomics, even though users were emotionally satisfied with the products. To overcome this problem, in this study, we propose a new human-oriented design methodology that is enhanced by taking the physical factors into consideration. The HAD scheme was verified by using a haptic chair simulator to design a tilt mechanism of an office chair for which the stiffness of the backrest can be adjusted; then, the design was simulated using MADYMO. The results show that the proposed method can reflect both the physical and emotional factors to modify the design in real-time.