• The Journal of the Acoustical Society of Korea
• /
• v.38 no.1
• /
• pp.67-72
• /
• 2019

In this study, we investigate the echo reduction performance of miniaturinzed Helmholtz resonators using smaller than wavelength acoustic metamaterial structures. The Helmholtz resonators are formed using air structures which exhibit large impedance mismatch with the surrounding underwater environment. Using the multi-physics software package, we find that significant reduction in the sonar signature is expected and frequency tailoring is possible by controlling the degree of space coiling and inner volume of the resonators. We find that for the basic Helmholtz resonators, up to 7 dB reduction in echo is expected at 10,000 Hz while when the miniaturized Helmoholtz resonators are used, up to 14 dB reduction in echo is expected at 5,000 Hz. In addition, frequency tailoring is demonstrated by varying the internal volume of the Helmholtz resonators and broadband characteristic is shown using superposition of various degree of space coiled structures. Through this study we investigate the effectiveness of the miniaturized Helmholtz resonators formed using air structures and the echo reduction results show promisses in the application of achieving underwater stealth.

• Fire Science and Engineering
• /
• v.33 no.1
• /
• pp.50-59
• /
• 2019

Experimental and numerical studies on the fire characteristics according to the distance between the fire source and sidewall under the over-ventilated fire conditions. A 1/3 reduced ISO 9705 room was constructed and spruce wood cribs were used as fuel. Fire Dynamics Simulator (FDS) was used for fire simulations to understand the phenomenon inside the compartment. As a result, the mass loss rate and heat release rate were increased due to the thermal feedback effect of the wall in the compartment fire compared to the open fire. As the distance between the fire source and sidewall was reduced, the major fire characteristics, such as maximum mass loss rate, heat release rate, fire growth rate, temperature, and heat flux, were increased despite the limitations of air entrainment into the flame. In particular, a significant change in these physical quantities was observed for the case of a fire source against the sidewall. In addition, the vertical distribution of temperature was changed considerably due to a change in the flow structure inside the compartment according to the distance between the fire source and sidewall.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.1
• /
• pp.558-563
• /
• 2021

Quantum-Dot Cellular Automata is a next-generation nanocircular design technology that is drawing attention from many research organizations not only because it is possible to design efficient circuits by overcoming the physical size limitations of existing CMOS circuits, but also because of its energy-efficient features. In this paper, one of the existing digital circuits, T flip-flop circuit, is proposed using QCA. The previously proposed T flip-flops are designed based on the majority gate, so the circuits are complex and have long delays. Therefore, the design of the XOR gate-based T flip-flop using cell interaction reduces circuit complexity and minimizes latency. The proposed circuit is simulated using QCADesigner, and the performance is compared and analyzed with the existing proposed circuits.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.3
• /
• pp.39-47
• /
• 2002

This paper deals with study of a new framework for the traceback of distributed DoS(Denial of Service) attacks in the Internet, in which many sources flood "spoofed" IP packets towards a single victim. In our scheme, the destination host traces those anonymous packets' losses, and infers the logical end-to-end paths back towards the sources. This method is based on the fact that there is a strong correlation between packet losses when those packets traverse along a same route, and the simulation results show high probabilities of detecting the topology under a certain condition. Compared with previous approaches, our scheme has a number of distinct features: It can be performed in realtime or non-realtime, without any supports of routers or ISPs. Our results may be applied to the inference of physical topology and to support previous approaches.pproaches.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.1
• /
• pp.67-75
• /
• 2008

RFID(Radio Frequency Identification) system is an automated identification system that consists of tags and readers. They communicate with each other by RF signal. As a reader can identify many tags in contactless manner using RF signal, RFID system is expected to do a new technology to substitute a bar-code system. But RFID system creates new threats to the security and privacy of individuals, Because tags and readers communicate with each other in insecure channel using RF signal. So many people are trying to study various manners to solve privacy problems against attacks, but it is difficult to apply to RFID system based on low-cost Gen2. Therefore, We will propose a new encryption scheme using matrix based on Gen2 in RFID system in paper, and We will analyze our encryption scheme in view of the security and efficiency through a simulation and investigate application environments to use our encryption scheme.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.1
• /
• pp.25-36
• /
• 2021

This paper presents a topology based on packet tracer and a five-step scenario model to make it easier for students to understand the network on which VLANs are applied. Virtual LAN (VLAN), developed as an alternative solution to the Routers that distribute broadcast traffic, is a virtual local area network that logically configured regardless of the physical network. The VLAN prevents the network performance degradation resulting from the broadcast traffic by dividing the broadcast domain so that the bandwidth can be used more efficiently. In addition, it enhances the security because on communication between the devices belonging to different VLANs is impossible. The five-step scenarios in this paper presented an efficient implementation case for students to understand and validate the various functions of VLANs through ping/telnet/tracert test and simulation, after setting up each step of programming switches and routers in the virtual network.

• Journal of Practical Engineering Education
• /
• v.12 no.2
• /
• pp.309-319
• /
• 2020

Billiards is a fun and popular sport, but both route planning and cueing prevent beginners from becoming skillful. A beginner in billiards requires constant concentration and training to reach the right level, but without the right motivating factor, it is easy to lose interests. This study aims to induce interest in billiards and accelerate learning by utilizing billiard path prediction and visualization on a highly immersive augmented reality platform that combines a stereo camera and a VR headset. For implementation, the placement of billiard balls is recognized through the OpenCV image processing program, and physics simulation, path search, and visualization are performed in Unity Engine. As a result, accurate path prediction can be achieved. This made it possible for beginners to reduce the psychological burden of planning the path, focus only on accurate cueing, and gradually increase their billiard proficiency by getting used to the path suggested by the algorithm for a long time. We confirm that the proposed AR billiards is remarkably effective as a learning assistant tool.

• Journal of Industrial Convergence
• /
• v.19 no.1
• /
• pp.65-70
• /
• 2021

This study aims to propose specific directions for developing digital twin contents. This aim is achieved by thorough literature review and applying the grounded theory. Based on customers' need analysis, this study suggests the priorities of contents development of digital twins. As a result, complex workflows and dangerous training contents are adequate to be developed. Moreover, large-scale projects such as nuclear powerplants that are hard to build the mock-ups were considered to be effective. This study provides significant information for not only software developers but also clients who desire to reduce training fees and improve the complex workflows. Since these client companies operate based upon multiple complex workflows, this study encourages stakeholders to make effective decisions. This research needs further analysis of current digital twin technology- possibilities and limitations.

• Textile Coloration and Finishing
• /
• v.34 no.1
• /
• pp.46-57
• /
• 2022

In this study, the relationship between fiber orientation and mechanical properties with the injection pressure of polyamide-6/glass fiber composite materials manufactured by the injection molding process was investigated. Also, an actual experimental data and finite element model-based simulation data were analyzed. Specimens were manufactured through the injection molding process setting the injection pressure differently to 700, 800, 900, and 1000 bar, respectively. A morphological analysis and orientation of the PA6/GF composite material were observed using Optical microscope. Through tensile and flexural strength tests, the mechanical properties of the PA6/GF composite materials with the injection pressure were studied. As a result, it was confirmed that the mechanical properties were the superior under the injection pressure of 900 bar molding conditions. In addition, the mechanical properties of the actually manufactured specimen (PA6/GF) and virtual engineering S/W((Digimat, Abaqus) were used to compare and analyze the analysis results for the mechanical properties, and based on the reliable DB, the physical properties of the PA6/GF composite characteristics were studied.

• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.287-291
• /
• 2022

In general, as the amplitude and phase information of the physical layer channel impulse response change rapidly in time and frequency according to the high-speed movement of the vehicles in V2X communication systems, it is difficult to accurately estimate these channels at the receiving end. In order to effectively overcome this problem, midamble-based channel estimation methods in which mid-ambles are periodically inserted into a packet have been recently considered. However, as the number of midambles increases, we suffer from the spectral efficiency loss. To relieve such a loss, in this paper, we propose a new bidirectional averaging channel estimation method that combines the existing data pilot-based channel estimation methods and the mid-ambles. Finally, through the simulation results, we demonstrate that the proposed method outperforms the existing mid-amble method in terms of packet error rate with fewer number of mid-ambles.