• The korean journal of orthodontics
• /
• v.31 no.1 s.84
• /
• pp.149-157
• /
• 2001

The purpose of this study was to investigate the property of a new Korean stainless steel wire(Jinsung Ind.) comparing with other foreign Products. Five types of stainless steel wires (Standard, Resilient, HI-T of Unitek, Stainless steel of Ormco and Jinsung Ind.) in 0.016x0.022 and 0.019x0.02 were tested to observe for Composition analysis, size difference, tensile properties, flexure bending property, tortion property, surface hardness and surface topography by means of SEM. The findings suggest that: 1. In maximum tensile strength of tensile properties, Unitek Hi-T showed the greatest value, followed by Unitek Resilient, Jinsung Stainless Steel, Ormco Stainless Steel, Unitek Standard in 0.016x0.022, and Unitek Hi-T showed highest value, followed by Jinsung Stainless Steel, Ormco Stainless Steel, Unitek Resilient, Unitek Standard in 0.019x 0.025. 2. In elongation rate, Unitek Standard showed the greatest value, fellowed by Ormco Stainless Steel, Unitek Hi-T, Unitek Resilient, Jinsung Stainless Steel in 0.016x0.022, and Unitek Hi-T showed the highest value, followed by Unitek Standard, Ormco Stainless Steel, Jinsung Stainless Steel, Unitek Resilient in 0.019x0.025. 3. In modulus of elasticity, Jinsung Stainless Steel showed the greatest value, followed by Unitek Hi-T, Unitek Resilient, Ormco Stainless Steel, Unitek Standard in 0.016x0.022, and Unitek Resilient showed the highest value followed by Jinsung Stainless Steel, Ormco Stainless Steel, Unitek Hi-T, Unitek Standard in 0.019x0.025. 4. In bending fatigue test, Jinsung Stainless Steel showed the greatest fracture resistance, followed by Unitek Hi-T, Unitek Standard, Unitek Resilient, Ormco Stainless Steel in 0.016x0.022, and Unitek Hi-T showed the greatest fracture resistance followed by Jinsung Stainless Steel, Unitek Resilient, Unitek Standard, Ormco Stainless Steel in 0.019x0.025. 5. In twist test, Unitek Resilient showed the greatest fracture resistance, followed by Jinsung Stainless Steel, Unitek Hi-7, Ormco Stainless Steel, Unitek Standard in 0.016x0.022, and Jinsung showed the greatest fracture resistance, followed by Unitek Resilient, Unitek Standard, Ormco Stainless Steel, Unitek Hi-T. 6. In surface topography, every products showed indentation and pitting. Jinsung stainless steel wire showed long thin indentation and relatively smooth surface. Unitek wires showed indentation and pitting and Ormco wire showed a lot of irregular pittings.

• Korean Journal of Food Science and Technology
• /
• v.50 no.1
• /
• pp.117-121
• /
• 2018

Puffing process modifies the chemical and physical properties of the grains. In this study, oats were puffed by subjecting them to pressure of 1.0 and 1.2 MPa, following which the bioactive constituents and antioxidant activities in the oat extracts were investigated. The polyphenol content in puffed oat extracts increased in a pressure-dependent manner (109 and 157 mg gallic acid equivalent/100 g at 1.0 and 1.2 MPa, respectively). In addition, gallic acid was synthesized after puffing ($518{\mu}g/g$ of extract at 1.0 MPa) and was the most abundant phenolic acid in puffed oats. The antioxidant activities, which were determined by 1, 1-diphenyl-2-picrylhydrazyl (DPPH) and 2, 2-azino-bis-3-ethylbenzothiazoline-6-sulphonic acid (ABTS) radical scavenging activities, were improved in oat extracts after puffing (+245 and +184% at 1.2 MPa, respectively). In conclusion, puffing process of oats increased the extractability of polyphenols, including gallic acid, which positively affected its antioxidant activities. These results will provide useful information when using puffed oats for food production.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.29-37
• /
• 2019

Textile quality management targets the physical properties of fabrics and the subjective discriminations of color and fitting. Color is the most representative quality factor that consumers can use to evaluate quality levels without any instruments. For this reason, quantification using a color discrimination device has been used for statistical quality management in the textile industry. However, small and medium-sized domestic textile manufacturers use only visual inspection for color discrimination. As a result, color discrimination is different based on the inspectors' individual tendencies and work procedures. In this research, we want to develop a textile industry-friendly quality management method, evaluating the possibility of rapid color discrimination using a digital imaging device, which is one of the office-automation instruments. The results show that an imaging process-based color discrimination method is highly correlated with conventional color discrimination instruments ($R^2=0.969$), and is also applicable to field discrimination of the manufacturing process, or for different lots. Moreover, it is possible to recognize quality management factors by analyzing color components, ${\Delta}L$, ${\Delta}a$, ${\Delta}b$. We hope that our rapid discrimination method will be a substitute technique for conventional color discrimination instruments via elaboration and optimization.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.1
• /
• pp.8-15
• /
• 2021

TiO2 has been used in various fields such as solar cells, dental implants, and photocatalysis, because it has high physical and chemical stability and is harmless to the body. TiO2 nanofibers which have a large specific surface area also show a good reactivity in bio-friendly products and excellent photocatalysis in air and water purification. To fabricate TiO2 nanofibers, an electrospinning method was used. To observe the diameter of TiO2 nanofibers with fabrication variables, the fabrication variables was divided into precursor composition variables and process variables and microstructure was analyzed. The concentrations of PVP (Polyvinylpyrrolidone) and TTIP (Titanium(IV) isopropoxide) were selected as precursor composition variables, and inflow velocity and voltage were also selected as process variables. Microstructure and crystal structure of TiO2 nanofibers were analyzed using FE-SEM (Field emission scanning electron microscope) and XRD (X-ray diffraction), respectively. As-spun TiO2 nanofibers with an average diameter of about 0.27 ㎛ to 1.31 ㎛ were transformed to anatase TiO2 nanofibers with an average diameter of about 0.22 ㎛ to 0.78 ㎛ after heat treatment of 3 hours at 450℃. Anatase TiO2 nanofibers with an average diameter of 0.22 ㎛ can be expected to improve the photocatalytic properties by increasing the specific surface area. To change the average diameter of TiO2 nanofibers, the control of precursor composition variables such as concentrations of PVP and TTIP is more efficient than the control of electrospinning process variables such as inflow velocity and voltage.

• Korean Security Journal
• /
• no.18
• /
• pp.169-190
• /
• 2009

Today, the rapid advance of scientific technologies has brought about fundamental changes to the types and levels of terrorism while the war against the world more than one thousand small and big terrorists and crime organizations has already begun. A method highly likely to be employed by terrorist groups that are using 21st Century state of the art technology is cyber terrorism. In many instances, things that you could only imagine in reality could be made possible in the cyber space. An easy example would be to randomly alter a letter in the blood type of a terrorism subject in the health care data system, which could inflict harm to subjects and impact the overturning of the opponent's system or regime. The CIH Virus Crisis which occurred on April 26, 1999 had significant implications in various aspects. A virus program made of just a few lines by Taiwanese college students without any specific objective ended up spreading widely throughout the Internet, causing damage to 30,000 PCs in Korea and over 2 billion won in monetary damages in repairs and data recovery. Despite of such risks of cyber terrorism, a great number of Korean sites are employing loose security measures. In fact, there are many cases where a company with millions of subscribers has very slackened security systems. A nationwide preparation for cyber terrorism is called for. In this context, this research will analyze the current status of Korea's cyber security systems and its laws from a policy perspective, and move on to propose improvement strategies. This research suggests the following solutions. First, the National Cyber Security Management Act should be passed to have its effectiveness as the national cyber security management regulation. With the Act's establishment, a more efficient and proactive response to cyber security management will be made possible within a nationwide cyber security framework, and define its relationship with other related laws. The newly passed National Cyber Security Management Act will eliminate inefficiencies that are caused by functional redundancies dispersed across individual sectors in current legislation. Second, to ensure efficient nationwide cyber security management, national cyber security standards and models should be proposed; while at the same time a national cyber security management organizational structure should be established to implement national cyber security policies at each government-agencies and social-components. The National Cyber Security Center must serve as the comprehensive collection, analysis and processing point for national cyber crisis related information, oversee each government agency, and build collaborative relations with the private sector. Also, national and comprehensive response system in which both the private and public sectors participate should be set up, for advance detection and prevention of cyber crisis risks and for a consolidated and timely response using national resources in times of crisis.

• Journal of the Korean Society of Radiology
• /
• v.11 no.5
• /
• pp.297-302
• /
• 2017

Recently, building materials and air purification filters with eco-friendly charcoal are actively studying to reduce the concentration of radon gas in indoor air. In this study, radon reduction performance was assessed by designing and producing new panel-type activated carbon filter that can be handled more efficiently than conventional charcoal filters, which can reduce radon gas. For the fabrication of our panel-type activated carbon filter, first the pressed molding product after mixing activated carbon powder and polyurethane. Then, through diamond cutting, the activated carbon filter of 2 mm, 4 mm and 6 mm thickness were fabricated. To investigate the physical characteristics of the fabricated activated carbon filter, a surface area and flexural strength measurement was performed. In addition, to evaluate the reduction performance of radon gas in indoor, the radon concentration of before and after the filter passes from a constant amount of air flow using three acrylic chambers was measured, respectively. As a result, the surface area of the fabricated activated carbon was approximately $1,008m^2/g$ showing similar value to conventional products. Also, the flexural load was found to have three times higher value than the gypsum board with 435 N. Finally, the radon reduction efficiency from indoor gas improved as the thickness of the activated carbon increases, resulting in an excellent radon removal rate of more than 90 % in the 6 mm thick filter. From the experimental results, the panel-type activated carbon is considered to be available as an eco-friendly building material to reduce radon gas in an enclosed indoor environment.

• Management & Information Systems Review
• /
• v.33 no.5
• /
• pp.97-115
• /
• 2014

The purpose of this study is to illustrating how the store selection factors affect the customer's satisfaction about the store and the intention of revisit base on the analyzing the store selection factors. At the same time, the difference between the influence on the customer's satisfaction and revisit intention of that in Korea and in China is also compared. Accordingly, through the notional understanding of configuration variables and the investigation of previous research, the Research hypothesis was set and the relevance between the two was inspected. The survey was aimed at the Korean customers who visit the large supermarkets in Korea and Chinese customers who visit the large supermarkets in China. After that, the reliability and validity of the collected data was verified and the research hypothesis was validated by structure equation modeling. The result of this study can by concluded as follows: First, in Korea the customer's satisfaction is showed to be affected by store selection factors, product property, service property and physical environment. Second, in China the customer's satisfaction is showed to be affected by store selection factors, product property, service property and physical environment. Third, in Korea the revisit intention is showed to be affected by customer's satisfaction. Forth, in China the revisit intention is showed to be affected by customer's satisfaction. Fifth, it shows little difference between the store selection factors of the customers visiting large supermarkets in Korea and in China. According to the research results above, the implications can be drawn as the customer's satisfaction of those who visit the large supermarkets may be affected by store selection factors (store property, product property, service property and physical environment). In recent years, more and more overseas large supermarkets are opening in both Korea and China and the competition among each is become more intense day by day. Every larger supermarket is trying their best to refine their store property, product property, service property and physical environment, in order to enhance the customer's satisfaction. The biggest factor that affects the customer's satisfaction and revisit intention in Korea is service property, So that the services requires proper measures and improvement. In China, the factor that affects most on the customer's satisfaction and revisit intention is physical environment. In order to enhance the customer's positive consciousness of stores, the physical environment needs to be well constructed. Lastly, in the compared research between Korea and China, the distribution of survey responders was limited from certain areas. Therefore, the further study can be implemented by more research in various geographical areas and more development in store selection factors.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.3
• /
• pp.23-28
• /
• 2018

Next generation displays show a trend of evolving from the display device environment (represented by existing televisions) to the mobile environment. The mobile display corresponding to the personal display is similar to a home theatre; however, they are advantageous because they are small and have a relatively lower weight. Therefore, the display industry has an interest in diverse product applications of displays, reproducing more accurate colours, and offering improved image quality from display devices of various sizes. To address these interests, a psychophysical experiment was conducted in this research. The experiment compared the size of the colour stimulation corresponding to foveal vision by gradually increasing the lightness of the background. This was based on the assumption of possible differences in colours being recognized by the lightness of the background and the size of the colour stimulation. Contrary to the results of previous studies, where the colours are identified more clearly as the size of the colour stimulation increases (assuming that the lightness of the background is not considered) here the results of the experiment showed that the attributes of the identified colours were different depending on the lightness of the background and the size of the colour stimulation. Based on the experimental results, it is possible to resolve errors in colour conversion that can occur when the input image is switched from a large screen size to a mobile size display, and to reproduce the colours more accurately and improve the image quality.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.4
• /
• pp.346-357
• /
• 2013

In this study, it was conducted to produce wood pellets using domestic forest thinning residues and examine their quality according to Korean pellet quality standard. Raw materials were composed of larch and mixed broad leaves species. Based on the small-end diameter (6 cm), they were classified into four different types of raw materials such as LM (larch with middle diameter), LS (larch with small diameter), MM (mixed broadleaf with middle diameter), and MS (mixed broadleaf with small diameter). After crushing and drying process, wood pellets were produced by a ring-die type pelletizer using each raw material. Wood pellets made from four different types of raw materials were tested for their quality such as calorific value, moisture content, ash content, inorganic matters and so on. As results of quality analysis, the calorific values of all wood pellets were higher than 198 kcal/kg, and satisfied with the first grade of Korea wood pellet standard. The ash content was slightly increased after pelletizing. Mechanical durability of wood pellets was highly dependent on the types of raw materials. The quality differences among wood pellets were turned out due to different physical and chemical characteristics of raw materials even though the same pelletizing condition was applied.

• Korean Journal of Food Science and Technology
• /
• v.31 no.6
• /
• pp.1503-1510
• /
• 1999

This study was performed to investigate the physicochemical properties of Korean Citrus sudachi fruit which were harvested at different harvesting time(every 20 days from Sep. 3 to Nov. 8) and region(Seogwipo and Cheju city area). The average weight of Citrus sudachi fruit harvested from Seogwipo area was as twice as that of Cheju area at the same period. The moisture content in fruit peel increased by ripening of fruit, but that of fruit juice showed no difference. The content of reducing sugar in fruit peel and fruit juice increased 2 times from Sep. 3 to Nov. 8. The content of crude fiber decreased both in fruit peel and fruit juice as progression of ripening. Crude protein and ash contents decreased in fruit peel but revealed no differences in the fruit juice during the same period. pH decreased in fruit peel and juice with its ripening. The content of vitamin C decreased by ripening of fruit. The transmittance which is important quality factor in fruit juice increased from Sep. 20 to Oct. 13. The content of free sugar increased about 2 times in fruit peel from Sep. 3 to Nov. 8 and showed 4 times increase in fruit juice at the same period. In the composition ratio of mineral, Ca and K were abundant in the fruit peel, but only K was the most abundant mineral in fruit juice than any others.