• Title/Summary/Keyword: 물리적 물성

Search Result 876, Processing Time 0.095 seconds

Accelerated Laboratory Experiments Investigating Weathering of Volcanic Rocks from Yuchon Group Exposed to Seawater and Acidified Distilled Water (실내인공풍화가속실험을 통한 해수와 산성증류수에 대한 유천층군 화산암의 풍화 특성 연구)

  • Ik Woo
    • The Journal of Engineering Geology
    • /
    • v.34 no.1
    • /
    • pp.25-38
    • /
    • 2024
  • Laboratory tests of accelerated artificial weathering compared the effects of seawater and acidified distilled water on rock weathering. The experiments simulated chemical and physical weathering of five different types of volcanic rock by applying 45 freeze-thaw cycles using seawater and acidified distilled water (pH 3), both at 70℃. The physical properties and uniaxial compressive strength (UCS) of the rocks were measured after 15 and 45 cycles of artificial weathering. Most of degradation of physical properties appeared within the first 15 cycles, and acidified distilled water had a greater effect than seawater. Analysis of variance (ANOVA) statistically evaluated the differences in UCS of the different rock types during the tests. The rate of UCS reduction after 45 cycles was similar across the samples, being independent of the rock type and the trend of changes in physical properties. In contrast to the changes in the physical properties, the UCS was more affected by seawater than by acidified distilled water.

그래핀의 기계적 물성

  • Lee, Chang-Gu
    • Journal of the KSME
    • /
    • v.53 no.9
    • /
    • pp.31-35
    • /
    • 2013
  • 2차원 물질인 그래핀은 뛰어난 물리적, 화학적, 기계적, 광학적 물성으로 인해 최근 크게 각광받고 있는 신물질이다. 이 글에서는 특별히 세상에서 가장 강한 물질로 알려진 그래핀의 다양한 기계적 물성연구와 응용연구에 관해 소개하도록 한다.

  • PDF

일본 PET 직물설계조건과 염색ㆍ가공 기술

  • 강지만;김승진;박경순;정기진
    • Proceedings of the Korean Society of Dyers and Finishers Conference
    • /
    • 2003.04a
    • /
    • pp.177-182
    • /
    • 2003
  • 원사의 물성이 최종직물 물성에 영향을 미치기도 하지만, 직물설계 조건에 따라서도 최종직물의 물성은 많이 달라진다. 원료섬유로부터 직물이 만들어질 때 섬유공정에서는 여러가지 변형이 일어난다. 즉, 실은 제직 공정에서의 장력, 직물은 염 가공공정에서의 여러 가지 인자에 의해 물리적인 변형이 일어나므로 최종의 복지상태의 물성변화가 일어난다. (중략)

  • PDF

The relation between physical/mechanical properties md ballistic properties in several engineering ceramics (세라믹스의 물리/기계적 물성과 방탄물성과의 상관관계 연구)

  • Kim Cheol-soo;Lee Hyung-Bock
    • Composites Research
    • /
    • v.18 no.6
    • /
    • pp.34-39
    • /
    • 2005
  • In this study, we analyzed the relation between physical/mechanical properties and ballistic properties for several engineering ceramics that were expected to use as armor material. After physical/mechanical measurement, we measured ballistic properties about KE(Kinetic Energy, L/D=10.7, tungsten heavy alloy) and HEAT(High Explosive Anti-Tank, K215) projectiles. Increasing Young's modulus/density, hardness/density and flexural strength/density ratios, ballistic properties were generally increased. Especially it appeared that the ballistic property about KE projectile was lineally increased, as HEL/density ratio increased.

Properties estimation of acoustical material (음향재료의 물리적 성질 추정)

  • Kim Yoon Jae;Kang Yeon June
    • Proceedings of the Acoustical Society of Korea Conference
    • /
    • autumn
    • /
    • pp.195-198
    • /
    • 2004
  • 음향재료의 성능을 예측하기 위해서는 음향재료의 여러 물성들을 알아야 한다. 그러나 음향재료의 물성들을 측정하는 것은 매우 시간이 오래 걸리며, 복잡한 작업이다. 실제로 비틀림률이나 특성길이들은 정확하게 측정하기가 상당히 까다롭고 어렵다. 음향재료 각각의 물성들이 흠음률과 표면임피던스에 미치는 영향을 파악하고 임피던스 튜브에서 측정한 수직입사 흠음률을 이용하여 물성들을 추정하였다. 추정된 물성과 실험을 통하여 얻어진 음향재료의 물성을 비교하고, 추정된 물성들을 토대로 음향학적으로 모델링된 이론식으로 예측된 흡음률과 임피던스 튜브를 이용하여 측정한 흠음률을 비교하여 타당성을 검토하였다.

  • PDF

Mechanical, Electrical Characteristics of Epoxy/Organoclay_93A Nanocmposites according to Power Ultrasonic Application Time (Epoxy/Organoclay_93A 나노콤포지트 기계적, 전기적 특성연구)

  • Park, Jae-Jun;Cho, Hee-Su;Cho, Sung-Min;Hwang, Byung-Joon
    • Proceedings of the KIEE Conference
    • /
    • 2008.07a
    • /
    • pp.1213-1215
    • /
    • 2008
  • 분산능력은 나노콤포지트의 제반적인 물성에 큰 영향을 준다. 그러나 유기용매를 사용한 분산능력은 전기적 절연특성에 불순물케리어로 작용되는 경우가 있어 오히려 절연성능 즉, 결합이 약하게 작용되는 결과를 가져오게 된다 이런 이유로 물리적인 분산법인 강력초음파법을 이용하여 Epoxy/Organoclay_93A 나노콤포지트를 제조하였다. 최적의 초음파 적용시간을 연구하기위해 강력초음파를 15,30,60,120분 각각에 대해 적용하였다. 적용시간은 기계적,전기적인 물성에 독립적인 특성을 나타내었다. 그러나 전반적인 물성의 비교에서 최적의 초음파 적용시 60분의 경우가 가장 양호한 결과를 얻었다. 기계적, 전기적인 물성에서 1차경화만으로 측정자료로 최적의 2차 경화를 가져가하면 더욱 높은 물성을 가져오게 될 것이다.

  • PDF

크림프 가공이 니들펀칭 부직포의 역학적 성질에 미치는 영향

  • 정재호;강태진
    • Proceedings of the Korean Fiber Society Conference
    • /
    • 1998.04a
    • /
    • pp.249-252
    • /
    • 1998
  • 니들펀칭 부직포는 구성 섬유소 집합체(web)를 바늘에 펀칭시켜 통과시킴으로써 섬유소간의 물리적인 결합력을 이용하여 제작한 섬유 구조물을 말한다. 니들펀칭 부직포의 물성에 미치는 인자는 크게 다음 세가지라고 볼 수 있다. 첫째, web을 구성하는 섬유의 물성이다.[1-4] 즉, 구성섬유의 인장성질이나 단면의 모양, 크림프의 존재유무, 섬도, 섬유길이, 마찰특성들이 부직포의 물성에 직접적인 영향을 준다.(중략)

  • PDF

Change of Physical Properties of Binder Extracted from after Artificial Aging of Asphalt Concretes (아스팔트 콘크리트의 노화 후 추출한 바인더의 물리적 특성 변화)

  • Kim, Kwang-Woo;Doh, Young-Soo;Kim, Sung-Woon
    • International Journal of Highway Engineering
    • /
    • v.4 no.4 s.14
    • /
    • pp.53-66
    • /
    • 2002
  • Asphalt binder characteristics in asphalt mixture are changed due to aging. However. depending upon aggregate and binder used, asphalt mixture dose not show the same level of stiffness and brittleness under the same ageing level. The factors affecting Physical Properties change of the asphalt binder within aged asphalt concrete are not well known and there is limited study which is dealing with this topic This study dealt with evaluation of physical properties of asphalt binder recovered from the mixtures after short-term and long-term aging. Two asphalts. two aggregates. two gradations and four polymers were used to make 32 mixture combinations. The mixtures were prepared and aged artificially in a forced draft oven. The measured physical properties included absolute viscosity, kinematic viscosity and penetration. Statistical analyses were carried out to find out the factor(s) having a significant effect on change of physical property of asphalt binder due to asphalt mixture aging. The results of study shown that aggregate, gradation and polymer had a significant effect on change of physical properties of asphalt binder.

  • PDF

The Human Spine Mechanical Properties Database for Korean (한국인 척추 연구를 위한 물성 정보 구축)

  • Kwak, dai-soon;Lee, seung-bock;Lee, sang-ho;Han, seung-ho
    • Proceedings of the Korea Contents Association Conference
    • /
    • 2011.05a
    • /
    • pp.259-260
    • /
    • 2011
  • 한국과학기술정보연구원과 가톨릭대학교 의과대학 가톨릭응용해부연구소에서는 기초기술연구회 National agenda project 일환으로 척추 연구자들이 쉽게 사용할 수 있는 기초 자료를 구축하고 있다. 척추 관련 컴퓨터 시뮬레이션 연구에 활용할 수 있는 모델 제작을 위한 형상 정보와 물리적 성질 정보를 구축하고 있다. 물리적 성질 정보 구축은 60대, 70대 기증시신 10여 표본을 활용하여 척추뼈의 임상적, 물리적 골밀도를 측정하고, 목척추(cervical vertebra), 등척추(thoracic vertebra), 허리척추(lumbar vertebra) 부분의 굽힘-폄(flexion-extension) 시험, 가쪽 굽힘(lateral bending) 시험, 회전(torsion), 압축(body/disc compression) 시험을 수행하여 작용력과 굽힘량의 관계를 구축하고 있다. 구축된 물성 시험 결과는 형상 모델과 함께 제공되어 자료의 활용도를 높이고 있으며, 이를 이용하여 한국인 특성이 반영된 척추 관련 연구 및 제품 개발에 활용될 수 있다.

  • PDF

Fresh-cut사과 전처리에 따른 물성학적 품질 특성

  • 박연주;최소영;김인호;문광덕
    • Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
    • /
    • 2003.04a
    • /
    • pp.118-118
    • /
    • 2003
  • 편의와 fresh-like quality를 선호하는 소비 경향에 맞추어 가공한 fresh-cut사과의 선도 연장을 위한 저해제를 탐색하였다. 실험에 사용된 사과는 박피하여 속심을 제거한 사과를 8조각으로 절단하여 저해제에 3분간 침지한 후 물기를 제거하고 각각 LDPE 포장지에 포장하여 실온에서 저장하면서 colorimeter와 rheometer를 이용하여 색도와 물성을 측정하였다. 저해제로는 1% ascorbic acid, citric acid, NaCl, MgCl$_2$, CaCl$_2$, KCl, CaSO$_4$, MgSO$_4$, $Na_2$SO$_4$, oxalic acid, calcium lactate, calcium citrate를 사용하였으며 천연저해제로는 건칡, 맥문동, 목향, Rhubarb, 당귀, 오약, 시체, 지각, 천문동, 청피, 계피, 구기자, 당귀, 진피, 감초, 녹차, 후추 등을 열수추출하여 사용하였다. 물리적인 변화는 시간이 경과함에 따라 감소하는 추세를 보였으며 일부 건조로 인해 texture의 증가를 나타내기도 했다. 처리에 따른 물리적인 변화로는 CaCl$_2$, NaSO$_4$, Cl, 시금치를 처리하였을 때 그 변화가 가장 작았으나 시금치의 경우 시금치로 인한 사과의 색변화로 관능적으로 좋지 않았다. 한약재는 목향, 당귀, 지각, 계피를 처리하였을 때 물리적인 변화가 가장 작았으나 시금치와 마찬가지로 처리 초기에 한약재 자체의 향과 색으로 인하여 관능적으로 좋지 못한 결과를 나타냈다. 갈변 정도를 나타내는 ΔE의 변화는 KCl과 CaCl$_2$, CaSO$_4$를 처리한 구에서 변화가 가장 작았으며 한약재를 처리하였을 경우 당귀, 천문동을 처리한 구에서 효과를 보였다. oxalic acid는 갈변저해에는 효과적이었으나 시간이 경과함에 따라 수분의 용출이 증가하였으며 물성의 변화도 컸다. 또한 ZnCl$_2$를 처리한 구에서는 이취 발생과 수분 용출이 컸으며 색의 변화도 컸다.

  • PDF