• The Korean Journal of Nuclear Medicine Technology
• /
• v.25 no.2
• /
• pp.41-47
• /
• 2021

Purpose There are many cyclotrons compared to the land area of the Republic of Korea. Because GMP certification is required and the nuclear medicine test does not apply for insurance, the number of examinations for nuclear medicine is decreasing. Therefore, there is a high probability of early decommissioning of the cyclotron. However, we do not unusually perform the radioactivation evaluation on concrete that can be classified as radioactive waste during the decommissioning of the cyclotron. In this study, we aim to confirm the radioactivation in the concrete surface using Handheld Radionuclide Identification Devices (RIDs). Materials and Methods Because there is no cyclotron being decommissioning in the Republic of Korea, it was impossible to perform the coring of concrete for radioactivation analysis. In this study, we used the KIRAMS-13 and analyzed the concrete surface in the target direction in the cyclotron room. After setting the target direction as the center, radionuclides were measured for about five months at thirty points with vertical and horizontal intervals of 30 cm. We used the RIIDEye(Detector: NaI(Tl) detector, manufacturer: Thermo) in this study and set the measurement time per point to one day (24 hours). Results Co-60 and Cs-137 were detected in some measurement points, and we confirmed the radioactivity of Co-60 detected at the most points. As a result, we found that the radioactivity of Co-60 was high in the diagonal direction (from the lower-left direction to the upper right direction) based on the center of the target. However, we think it is impossible to apply the corresponding results to all cyclotrons because we performed the study using only one cyclotron. Conclusion In thirty measurement points, we could confirm the radioactive nuclides and the relative radioactivity using the results of portable nuclides analyzer. Therefore, we expect that we can use the portable nuclides analyzer to select the coring position of concrete during the decommissioning of the cyclotron. Also, if we secure the radioactivation data for several years, we expect to make a more accurate estimate of radioactive waste during the preparation period of decommissioning of the cyclotron.

• Journal of Korea Port Economic Association
• /
• v.38 no.1
• /
• pp.1-14
• /
• 2022

The change in the management environment of the logistics industry in the era of global competition is becoming an era in which customers choose companies. Differentiation from competitors through the provision of products and services suitable for customers As customers' choices change depending on their superiority, companies are constantly striving to receive or retain customers' choices. Ultimately, this competitive structure can be seen as the importance of long-term relationship building. Therefore, in this study, we examined how factors related to transaction characteristics performed by logistics companies for customer satisfaction in the transaction relationship between cargo companies and shippers affect performance and long-term transaction intentions. First, we derived the factors of logistics service, cost, logistics infrastructure, and company competency, which are transaction characteristics factors of a logistics company that must be specifically realized for customer satisfaction in transactions between logistics companies. Second, we analyzed how the transaction characteristics factors of a logistics company affect the company's performance, and finally, how the company's performance factors affect long-term transaction intentions. As a result of empirical analysis, there were no statistically significant results on the relationship between transaction characteristics and performance of logistics companies, which can be attributed to the small size of the logistics companies that were the sample. In other words, logistics companies that do not have sufficient capacity to provide services at low prices have no choice but to engage in constant bleeding competition. It can be seen that it reflects the characteristics of the industry. On the other hand, the relationship between corporate performance factors and long-term transaction intention was found to have a positive relationship. The higher the level of partnership with logistics companies and visible financial performance is, the higher the transaction will be in the future, and the more the transaction volume will be gradually increased. And even if it costs a little more, it can be seen that the intention to continue trading is greatly expressed.

• Korean Journal of Ecology and Environment
• /
• v.56 no.1
• /
• pp.94-103
• /
• 2023

Cyanobacterial resting cells, such as akinetes, are important seed cells for cyanobacteria's early development and bloom. Due to their importance, various methods have been attempted to isolate resting cells present in the sediment. Ludox is a solution mainly used for cell separation in marine sediments, but finding an accurate method for use in freshwater is difficult. This study compared the two most commonly used Ludox methods (direct sediment treatment and sediment distilled water suspension treatment). Furthermore, we proposed a highly efficient method for isolating cyanobacterial resting cells and eDNA amplification from freshwater sediments. Most of the resting cells found in the sediment were akinete to the Nostocale and were similar to those of Dolichospermum, Cylindrospermum, and Aphanizomenon. Twenty times more akinetes were found in the conical tube column using the sediment that had no treatment than in the sample treated by suspending the sediment in distilled water. Akinete separated through Ludox were mainly spread over the upper and lower layers in the column rather than concentrated at a specific depth in the column layer. The mibC, Geo, and 16S rDNA genes were successfully amplified using the sediment directly in the sample. However, the amplification products of all genes were not found in the sample in which the sediment was suspended in distilled water. Therefore, 5 g to 10 g of sediment is used without pretreatment when isolating cyanobacterial resting cells from freshwater sediment. Cell isolation and gene amplification efficiency are high when four times the volume of Ludox is added. The Ludox treatment method presented in this study isolates cyanobacterial resting cells in freshwater sediment, and the same efficiency may not appear in other biotas. Therefore, to apply Ludox to the separation of other biotas, it is necessary to conduct a pre-experiment to determine the sediment pretreatment method and the water layer where the target organism exists.

• Economic and Environmental Geology
• /
• v.56 no.1
• /
• pp.87-101
• /
• 2023

The purpose of this study identifies the production of aggregate every year, and is to understand the supply and demend prospects. In 2021, the total of 135 million m³ of of aggregates was produced in Korea, a slightly increase from the total production of 2020. Of these, about 47 million m³ of sand and about 88 million m³ of gravel were produced. About 46% of total quantity of aggregates were produced with permission and the rest were aggregates produced after declaration. It estimated that of the 135 million m³ of aggregates in Korea in 2020, about 49.6% was produced by screening crushed aggregate, by 36.8% by forest aggregate, 2.6% by land aggregate, 6.8% by sea aggregate and 2.6% by washing each other, and 0.2% by river aggregate. This indicates that screening crushed aggregate and forest aggregate are the main product as in 2021. Leading producing metropolitan governments were Gyeonggi-do, Chungcheongnam-do, Incheon, Gyeongsangnam-do, Chungcheongbuk-do, Gangwon-do, Jeollanam-do, Gyeongsangbuk-do in order decreasing volume. In 2021, aggregates were produced in 148 local governments, and The 10 leading producing local governments were, in descending order of volume, Hwaseong, Ongjin, Paju, Pocheon, Gwangju, Youngin, Cheongju, Gimhae, Anseong, west EEZ. The combined production of the 10 leading local governments accounted for 30% of the national total, and. 47 local governments have produced aggregates of more than 1 million m³ each other. In 148 local governments that produced aggregate, a total of 805 active operations produced aggregate with 372 operations by river, land and forest aggregate, 433 operations by selective crushed and washing aggregate.

• Environmental and Resource Economics Review
• /
• v.32 no.1
• /
• pp.47-75
• /
• 2023

Compared to the EU, which legislates the Carbon Border Adjustment System (CBAM), the United States' carbon border adjustment policy movement is still relatively slow. Recently, however, a related bill has been proposed in the United States, and research institutes have been presenting research results on how to introduce an upstream carbon tax rather than an emission trading system and carry out carbon border adjustment based on it. Therefore, in this study, we looked at the economic and environmental effects of introducing this type of upstream carbon tax and carbon border adjustment in Korea. If an upstream carbon tax of KRW 30,000 per ton of CO₂ is applied to the net supply of domestic fossil energy, the expected carbon tax revenue is approximately KRW 22.9961 trillion, equivalent to about 5.7% of the total revenue of the Korean government of KRW 402 trillion in 2019. In addition, the carbon dioxide content of the steel sector, calculated based on the energy supply and demand status of the steel sector, which emits the most greenhouse gas emissions in Korea and has a considerable amount of overseas exports, was 106.22 million tons of CO₂. On the other hand, assuming that the upstream carbon tax of 30,000 won per ton of CO₂ embodied is directly passed on to the production cost of the steel sector, the carbon tax burden in the steel sector is estimated to reach approximately KRW 3.1865 trillion. Even after deducting KRW 1.1599 trillion in export refunds estimated by using the share of exports of steel products, the net carbon tax burden on steel products for domestic demand amounts to KRW 2.0266 trillion, which is analyzed to act as a factor in increasing the price of steel products.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.2
• /
• pp.273-284
• /
• 2024

This study investigates the impact of international oil price fluctuations on overseas construction orders secured by domestic and foreign companies. The analysis employs statistical data spanning the past 20 years, encompassing international oil prices, overseas construction orders from domestic firms, and new overseas construction orders from the top 250 global construction companies. The correlation between these variables is assessed using correlation coefficients(R), determination coefficients(R²), and p-values. The results indicate a strong positive correlation between international oil prices and overseas construction orders. The correlation coefficient between domestic overseas construction orders and oil prices is found to be 0.8 or higher, signifying a significant influence. Similarly, a high correlation coefficient of 0.76 is observed between oil prices and new orders from leading global construction companies. Further analysis reveals a particularly strong correlation between oil prices and overseas construction orders in Asia and the Middle East, potentially due to the prevalence of oil-related projects in these regions. Additionally, a high correlation is observed between oil prices and orders for industrial facilities compared to architectural projects. This suggests an increase in plant construction volumes driven by fluctuations in oil prices. Based on these findings, the study proposes an entry strategy for navigating oil price volatility and maintaining competitiveness in the overseas construction market. Key recommendations include diversifying project locations and supplier bases; utilizing hedging techniques for exchange rate risk management, adapting to local infrastructure and market conditions, establishing local partnerships and securing skilled local labor, implementing technological innovations and digitization at construction sites to enhance productivity and cost reduction The insights gained from this study, coupled with the proposed overseas expansion strategies, offer valuable guidance for mitigating risks in the global construction market and fostering resilience in response to international oil price fluctuations. This approach is expected to strengthen the competitiveness of domestic and foreign construction firms seeking success in the international arena.

• Clean Technology
• /
• v.30 no.1
• /
• pp.37-46
• /
• 2024

Environmental problems caused by plastic waste have been continuously growing around the world, and plastic waste is increasing even faster after COVID-19. In particular, PP and PE account for more than half of all plastic production, and the amount of waste from these two materials is at a serious level. As a result, researchers are searching for an alternative method to plastic recycling, and plastic pyrolysis is one such alternative. In this paper, a numerical study was conducted on the pyrolysis behavior of non-condensable gas to predict the chemical reaction behavior of the pyrolysis gas. Based on gas products estimated from preceding literature, the behavior of non-condensable gas was analyzed according to temperature and residence time. Numerical analysis showed that as the temperature and residence time increased, the production of H₂ and heavy hydrocarbons increased through the conversion of the non-condensable gas, and at the same time, the CH₄ and C₆H₆ species decreased by participating in the reaction. In addition, analysis of the production rate showed that the decomposition reaction of C₂H₄ was the dominant reaction for H₂ generation. Also, it was found that more H₂ was produced by PE with higher C₂H₄ contents. As a future work, an experiment is needed to confirm how to increase the conversion rate of H₂ and carbon in plastics through the various operating conditions derived from this study's numerical analysis results.

• Applied Biological Chemistry
• /
• v.15 no.1
• /
• pp.65-75
• /
• 1972

The rice qualities including cooking and eating qualities were studied using recommended Korean rice varieties (20 of japonica and 3 of indies type; IR 667) which were grown at Suwon, Korea in 1971. As the result, followings were obtained. 1. Amylose contents of white rice were varied with the varieties 21.1 to 25.5% and the average was 23.0%. Three indica type varieties (IR 667) showed higher amylose contents than the other japonica type varieties except Mankyung. Among japonica type varieties, Palkum, Mankyung composed the group of the highest amyloes content and Kimmaje was the lowest. 2. Blue values were distributed in the range of 0.38 to 0.48 and the average was 0.42 IR 667 varieties showed the highest blue value among them. Among japonica type varieties, Jaegun showd the highest blue value and Sooseung, Shirogane showed successively lower values, Shin #2, Nongbaik, Palkweng, Suwon #82, Mankyung, Nonglim #25 and Nongkwang relatively lower blue values. 3. Alkali numbers were in the range of 6.0 to 7.4 and the average was 6.8. Much difference was not shown in alkali number between IR 667 group and the japonica varieties group. 4. Gelatinization temperature were ranged from 59.5 to 64.0 IR 667 varieties showed relatively higher gelatinization temperature than japonica type varieties. 5. Water uptake ratios were measured in the range of 2.67 to 2.92 and the average was 2.79. IR 667 varieties were belonged to the group of highest water uptake ratio. Among japonica type varieties Kimmaje, Suwon #82, Nonglim #29, Deungpan #5, Jaegun, Jinhung, were belonged to the group of relatively high water uptake ratio and Palkweng, Palkeum and Paldal to the relatively low water uptake ratio. 6. Expaned volums were ranged from 29.8 to 33.7 and the average was 31.8. IR 667 varieties showed higher expanded volumes than japonica type varieties. 7. Intensities of starch-iodine blue value of residual liquid indicated 0.35 to 0.58. Among them IR 667 varieties showed relatively high intensities. 8. The range of total solids in residual liquids was 0.605 to 0.810 and the average was 0.700 Much difference was not shown in total solids in residual liquid between IR 667 varieties and japonica varieties. 9. pH values of residual liquids were in the range of 6.3 to 7.3 and the average was 6.95. IR 667 varieties showed lower pH than japonira type varieties.

• Journal of Food Hygiene and Safety
• /
• v.27 no.3
• /
• pp.233-246
• /
• 2012

In this study, we investigated the applicability of the photostimulated luminescence(PSL), thermoluminescence(TL) and electron spin resonance(ESR) methods for various foods which are not allowed to be irradiated in Korea. All 15 foods including sesame, almond, peanut, cocoa powder etc. were analyzed. Samples were irradiated at 1~10 kGy using a $^{60}Co$ gamma-ray irradiator. In PSL study, the photon counts of all the unirradiated samples showed negative(lower than 700). The photon counts irradiated(1 kGy) dried shrimp, roasted peanut and seasoned peanut showed positive(higher than 5,000) and the other samples were negative or intermediate(> 700 and < 5,000). In TL analysis, results showed that it is possible to apply TL method to all foods containing minerals. In ESR measurements, the ESR signal(single-line) intensity of irradiated foods was higher than non-irradiated foods. In particular, the specific ESR signals of irradiation-induced crystalline sugar, cellulose and bone radical were detected in dried plum, raisin, dried cherry, mango(dried, frozen), rambutan, cocoa(powder), cinnamon, parsley, carrot, broccoli, dried arrow squid, dried pollack and dried shrimp. According to the results, PSL, TL and ESR methods were successfully applied to detect the irradiated foods because TL method is not able to detect the irradiated foods rarely composed of minerals. ESR is also a difficult method to detect the changes of ESR signal patterns of food. It is concluded that TL analysis or ESR assay is suitable for detection of irradiated samples and a combined method is recommendable for enhancing the reliability of detection results.

• Journal of Intelligence and Information Systems
• /
• v.26 no.3
• /
• pp.91-108
• /
• 2020

Korea's famous soccer players are steadily performing well in international leagues, which led to higher interests of Korean fans in the international leagues. Reflecting the growing social phenomenon of rising interests on international leagues by Korean fans, the study examined the overall consumer perception in the consumption of uniform by domestic soccer fans and compared the changes in perception following the transfers of the players. Among others, the paper examined the consumer perception and purchase factors of soccer fans shown in social media, focusing on periods before and after the recruitment of Heung-Min Son to English Premier League's Tottenham Football Club. To this end, the EPL uniform is the collection keyword the paper utilized and collected consumer postings from domestic website and social media via Python 3.7, and analyzed them using Ucinet 6, NodeXL 1.0.1, and SPSS 25.0 programs. The results of this study can be summarized as follows. First, the uniform of the club that consistently topped the league, has been gaining attention as a popular uniform, and the players' performance, and the players' position have been identified as key factors in the purchase and search of professional football uniforms. In the case of the club, the actual ranking and whether the league won are shown to be important factors in the purchase and search of professional soccer uniforms. The club's emblem and the sponsor logo that will be attached to the uniform are also factors of interest to consumers. In addition, in the decision making process of purchase of a uniform by professional soccer fan, uniform's form, marking, authenticity, and sponsors are found to be more important than price, design, size, and logo. The official online store has emerged as a major purchasing channel, followed by gifts for friends or requests from acquaintances when someone travels to the United Kingdom. Second, a classification of key control categories through the convergence of iteration correlation analysis and Clauset-Newman-Moore clustering algorithm shows differences in the classification of individual groups, but groups that include the EPL's club and player keywords are identified as the key topics in relation to professional football uniforms. Third, between 2002 and 2006, the central theme for professional football uniforms was World Cup and English Premier League, but from 2012 to 2015, the focus has shifted to more interest of domestic and international players in the English Premier League. The subject has changed to the uniform itself from this time on. In this context, the paper can confirm that the major issues regarding the uniforms of professional soccer players have changed since Ji-Sung Park's transfer to Manchester United, and Sung-Yong Ki, Chung-Yong Lee, and Heung-Min Son's good performances in these leagues. The paper also identified that the uniforms of the clubs to which the players have transferred to are of interest. Fourth, both male and female consumers are showing increasing interest in Son's league, the English Premier League, which Tottenham FC belongs to. In particular, the increasing interest in Son has shown a tendency to increase interest in football uniforms for female consumers. This study presents a variety of researches on sports consumption and has value as a consumer study by identifying unique consumption patterns. It is meaningful in that the accuracy of the interpretation has been enhanced by using a cluster analysis via convergence of iteration correlation analysis and Clauset-Newman-Moore clustering algorithm to identify the main topics. Based on the results of this study, the clubs will be able to maximize its profits and maintain good relationships with fans by identifying key drivers of consumer awareness and purchasing for professional soccer fans and establishing an effective marketing strategy.