• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.492-498
• /
• 2012

In this study, hydrodynamics such as solid circulation rate and voidage in the desulfurizer and the reaction characteristics of Zn-based solid sorbents were investigated using lab-scale high pressure and high temperature desulfurization process. The continuous HGD (Hot Gas Desulfurization) process consist of a fast fluidized bed type desulfurizer (6.2 m tall pipe of 0.015 m i.d), a bubbling fluidized bed type regenerator (1.6 m tall bed of 0.053 m i.d), a loop-seal and the pressure control valves. The solid circulation rate was measured by varying the slide-gate opening positions, the gas velocities and temperatures of the desulfurizer and the voidage in the desulfurizer was derived by the same way. At the same gas velocities and the same opening positions of the slide gate, the solid circulation rate, which was similar at the temperature of $300^{\circ}C$ and $550^{\circ}C$, was low at those temperatures compared with a room temperature. The voidage in the desulfurizer showed a fast fluidized bed type when the opening positions of the slide gate were 10~20% while that showed a turbulent fluidized bed type when those of slide gate were 30~40%. The reaction characteristics of Zn-based solid sorbent were investigated by different desulfurization temperatures at 20 atm in the continuous operation. The $H_2S$ removal efficiency tended to decrease below the desulfurization temperature of $450^{\circ}C$. Thus, the 10 hour continuous operation has been performed at the desulfurization temperature of $500^{\circ}C$ in order to maintain the high $H_2S$ removal efficiency. During 10 hour continuous operation, the $H_2S$ removal efficiency was above 99.99% because the $H_2S$ concentration after desulfurization was not detected at the inlet $H_2S$ concentration of 5,000 ppmv condition using UV analyzers (Radas2) and the detector tube (GASTEC) which lower detection limit is 1 ppmv.

• The Journal of the Petrological Society of Korea
• /
• v.20 no.3
• /
• pp.161-172
• /
• 2011

Open beaker digestion method is routinely used as the sample preparation technique for trace element determination of rock samples by inductively coupled plasma mass spectrometry, With this method, however, dissolution of Zr and Hf is not always guaranteed especially when the samples contain refractory minerals. In this study, glass bead digestion technique was compared with conventional open beaker digestion technique for the sample preparation of three USGS rock standards such as AGV-2, BHVO-2, and G-3. Thirty trace elements including rare earth elements were analysed by ICP-MS and ICP-AES. There were no clear differences in analytical results for the AGV-2 and BHVO-2 standards between the two techniques, but Zr, Hf, Y, and middle- to heavy- rare earth element concentrations of the G-3 standard prepared by open beaker digestion technique were significantly lower than the recommended values. This can be attributed to the presence of refractory mineral zircon. On the contrary, all the analytical results of the G-3 standard prepared by glass bead digestion technique were in good agreement with the recommended values, indicating complete dissolution of zircon. The analytical results show that the volatile elements such as Pb and Zn were not lost during the preparation of glass bead. Low dilution glass bead digestion technique described here will be very helpful to enhance precision and accuracy of trace element analysis for geological samples containing refractory minerals.

• Korean Journal of Materials Research
• /
• v.10 no.11
• /
• pp.778-783
• /
• 2000

Effects of the $Al_2$O$_3$surface protective layer, deposited on the SnO$_2$sensing layer by aerosol flame deposition (AFD) method, on the sensing properties of SnO$_2$thin film ags sensors were investigated.Effects of Pt doping to the $Al_2$O$_3$surface protective layer on the selectivity of CH$_4$ gas were also investigated. 0.3$\mu\textrm{m}$ thick SnO$_2$thin sensing layers on Pt electrodes were prepared by R.F. magnetron sputtering with R.F. power of 50 W, at working pressure of 4mTorr, and at 20$0^{\circ}C$ for 30 min. $Al_2$O$_3$surface protective layers on SnO$_2$layers were prepared by AFD using a diluted aluminum nitrade (Al(NO$_3$).9$H_2O$) solution. The sensitivity of CO gas in the SnO$_2$gas sensor with an $Al_2$O$_3$surface protective layer was significantly decreased. But that of CH$_4$gas remained almost same with pure SnO$_2$gas sensor. This result shows that the selectivity of CH$_4$gas is increased because of the $Al_2$O$_3$surface protective layer. In the case of SnO$_2$gas sensors with Pt-doped $Al_2$O$_3$surface protective layers, low sensing property to CO gas and high sensing property to CH$_4$were observed. This results in the increasing of selectivity of CH$_4$gas selectivity are discussed.

• Journal of Sensor Science and Technology
• /
• v.6 no.4
• /
• pp.328-336
• /
• 1997

The CdSe thin films were grown on the Si(100) wafers by a hot wall epitaxy method (HWE). The source and substrate temperature are $600^{\circ}C$ and $430^{\circ}C$ respectively. The crystalline structure of epilayers was investigated by double crystal X-ray diffraction(DCXD). Hall effect on the sample was measured by the van der Pauw method and studied on the carrier density and mobility dependence on temperature. From Hall data, the mobility was increased in the temperature range 30K to 150K by impurity scattering and decreased in the temperature range 150k to 293k by the lattice scattering. In order to explore the applicability as a photoconductive cell, we measured the sensitivity(${\gamma}$), the ratio of photocurrent to darkcurrent(pc/dc), maximum allowable power dissipation(MAPD), spectral response and response time. The results indicated that the photoconductive characteristic were the best for the samples annealed in Cu vapor compare with in Cd, Se, air and vacuum vapour. Then we obtained the sensitivity of 0.99, the value of pc/dc of $1.39{\times}10^{7}$, the MAPD of 335mW, and the rise and decay time of 10ms and 9.5ms, respectively.

• Horticultural Science & Technology
• /
• v.19 no.1
• /
• pp.60-65
• /
• 2001

'Shinil' pear cultivar (Pyrus pyrifolia Nakai) which was originated in a cross between 'Shinko' (non-patented, released in 1941) and 'Hosui' (non-patented, released in 1972) in 1978 was released as a middle season harvest variety. Its usual picking time coincided with 'Chuseok' season which is one of the most famous national holiday in Korea. The fruit showed high soluble solids content and good appearance. The cultivar was preliminarily selected in 1991, and its regional adaptability was evaluated in the name of 'Wonkyo Na-13' at 9 sites for four years from 1992, and finally selected and named in 1995. 'Shinil' is medium in tree vigor like 'Hosui' and spreading in tree habit as 'Niitaka', a leading cultivar in Korea, and consistently very productive. It has high resistance to black rot caused by Alternaria kikuchiana and pear necrotic spot caused by pear necrotic spot virus. Its full bloom is one day earlier than that of 'Niitaka' cultivar and harvest time is September 25 at Suwon area which is 3 days later than that of 'Hosui'. Fruit is round in shape with a deep medium stalk cavity and medium calyx basin and has attractive light yellow brown skin color. The fruit weight ranges between 300 and 400 g, which is similar to 'Chojuro', 'Shinko', and 'Hosui'. Soluble solid content is approximately at the level of 13-14 Brix, which is higher than that of 'Chojuro'. The flesh is cream-white, very juicy, and light grit with soft and fine texture.

• (The)Study of the Eastern Classic
• /
• no.68
• /
• pp.35-67
• /
• 2017

This paper examines the petition to the king of Doam(陶菴) Leejae(李縡), one of the key figures of 18th century. He wrote a total of 49 he petition to the king, mostly resignation petition to the king. He emphasized the genuine feelings and emphasized the accurate persuasion logic when he was writing a petition to the king. It is not contradictory to these elements, looking at his actual situation he wrote. He wrote the resignation petition to the king three times to resign Daejehak (大提學), he changed his persuasion logic in each of the resignation petition to the king. We can look at the aspect of transforming persuasion logic on the same topic. His resignation petition to the king, for the first time, was particularly well structured in terms of composition, and used a proper accent method. His resignation petition to the king has the beautiful literary art of gomun(古文), such as the expression of the so-called munjongjasoon(文從字順) and the composition of paragraph organically corresponding. The best work of his resignation petition to the king is Maneonso(萬言疏). The contents criticized Yeongjo(英祖)'s tangpyeongchaek(蕩平策) while evaluating Sinimoksa(辛壬獄事). It consists of a total of 5,300 letters. This work repeatedly used the irony, the method of seolui(設疑), and the incremental method to criticize the tangpyeongchaek(蕩平策), and put Yeongjo(英祖)'s position to the corner. This work is an example of other the resignation petition to the king.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.419-428
• /
• 2021

In order to develope a mobile-based greenhouse energy calculation program, firstly, the overall thermal transmittance of 10 types of major covers and 16 types of insulation materials were measured. In addition, to estimate the overall thermal transmittance when the cover and insulation materials were installed in double or triple layers, 24 combinations of double installations and 59 combinations of triple installations were measured using the hotbox. Also, the overall thermal transmittance value for a single material and the thermal resistance value were used to calculate the overall thermal transmittance value at the time of multi-layer installation of covering and insulating materials, and the linear regression equation was derived to correct the error with the measured values. As a result of developing the model for estimating thermal transmittance when installing multiple layers of coverings and insulating materials based on the value of overall thermal transmittance of a single-material, the model evaluation index was 0.90 (good when it is 0.5 or more), indicating that the estimated value was very close to the actual value. In addition, as a result of the on-site test, it was evaluated that the estimated heat saving rate was smaller than the actual value with a relative error of 2%. Based on these results, a mobile-based greenhouse energy calculation program was developed that was implemented as an HTML5 standard web-based mobile web application and was designed to work with various mobile device and PC browsers with N-Screen support. It had functions to provides the overall thermal transmittance(heating load coefficient) for each combination of greenhouse coverings and thermal insulation materials and to evaluate the energy consumption during a specific period of the target greenhouse. It was estimated that an energy-saving greenhouse design would be possible with the optimal selection of coverings and insulation materials according to the region and shape of the greenhouse.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.271-277
• /
• 2021

In this study, experiments of local heating on crown and supplying warm nutrient for energy saving and improving growth of 'Seolhyang' strawberry were conducted. The temperature of inside and crown in greenhouses which were control (space heating 8℃) and test (space heating 5℃+crown heating) was measured. In the control greenhouse, the average of temperature and humidity in December was 7.1℃, 87.2%, respectively. In the test greenhouse, the average of temperature and humidity in December was 5.7℃, 88.7%. The temperature of crown and inside the bed were 7.9℃, 10.8℃ in control, 9.3℃, 12.7℃ in test. During the test period, the total 16,847×10³ kcal of energy was consumed in control greenhouse including space heating. In test greenhouse including space heating, crown heating and warm water supplying, total 9,475.7×10³ kcal of energy was consumed. So, energy consumption in test was 43.8% less than in the control. The total yields of strawberry during test period were 412.7g/plant for test greenhouse and 393.3g/plant for control greenhouse respectively.

• Korean Journal of Food Science and Technology
• /
• v.53 no.4
• /
• pp.423-433
• /
• 2021

This study was performed to examine the neuroprotective effect of the ethyl acetate fraction from Eucommia ulmoides oliver leaf (EFEL) on PM_2.5-induced cytotoxicity. EFEL had higher total phenolic and flavonoid contents than the other fractions. In ABTS and DPPH radical scavenging activities, the IC₅₀ of EFEL was measured as 212.80 and 359.13 ㎍/mL, respectively. To investigate the neuroprotective effect of EFEL, MTT and DCF-DA assays were performed on HT22, MC-IXC, and BV-2 cells. EFEL effectively decreased PM_2.5-induced intercellular reactive oxygen species (ROS) content and inhibited PM_2.5-induced cell death. In the results of protein expression related to cellular cytotoxicity on microglial cells (BV-2), EFEL had an improvement effect on cell apoptosis and inflammatory pathways. Rutin and chlorogenic acid were identified as the main physiological compounds. Moreover, it was expected that EFEL, including rutin and chlorogenic acid, could be functional food substances with neuroprotective effects against PM_2.5-induced oxidative stress.

• Korean Journal of Food Science and Technology
• /
• v.53 no.2
• /
• pp.223-229
• /
• 2021

To evaluate the protective effect of Codium fragile on fine dust (PM2.5)-induced cytotoxicity, we investigated its antioxidant activity and cell protective effect on PM2.5-exposed cells. The 40% ethanolic extract of C. fragile showed the highest total phenolic content, whereas the water extract of C. fragile showed the highest total polysaccharide content. The protective effect of the extracts on PM2.5-induced oxidative damage in nasal cavity (RPMI2650), lung (A549), brain (MC-IXC), hippocampus (HT-22), and microglia (BV-2) cells was evaluated by measuring the intracellular reactive oxygen species (ROS) content and cell viability. The results showed that the 40% ethanolic extract more efficiently inhibited ROS production than the water extract. In contrast, PM2.5-exposed cells treated with the water extract showed higher viability than those treated with the 40% ethanolic extract.