• The Korean Journal of Nuclear Medicine
• /
• v.32 no.3
• /
• pp.266-275
• /
• 1998

Purpose: We measured pulmonary epithelial permeability by $^{99m}Tc-DTPA$ radioaerosol clearance in patients with diabetes and correlated with the presence of microangiopathy to understand the pathophysiology of pulmonary microangiopathy and evaluate $^{99m}Tc-DTPA$ radioaerosol clearance as a diagnostic test to assess pulmonary microangiopathy. Materials and Methods: We performed $^{99m}Tc-DTPA$ radioaerosol scan in 10 normal subjects, 10 asymptomatic smokers, 20 diabetic patients without history of smoking (10 with microangiopathy, 10 without microangiopathy). $^{99m}Tc-DTPA$ clearance half-time ($T_{1/2}$) was calculated, then compared with the result of chest radiography and pulmonary function test. Results: Chest radiography and pulmonary function test were normal in all subjects. There were no significant difference of clinical or laboratory characteristics between these groups except age. The diabetic patients with microangiopathy were significantly older (p<0.05). The $T_{1/2}$ of normal subjects and asymptomatic smokers were significantly different ($65.2{\pm}23.7min$ vs $39.6{\pm}9.8min$, p<0.05). For diabetic patients with microangiopathy, the $T_{1/2}$ was $90.5{\pm}46.5min$ and significantly delayed when compared with those of normals and asymptomatic smokers (p<0.05). However, the $T_{1/2}$ of diabetic patients without microangiopathy, $70.0{\pm}12.7min$, was not significantly different from those of normals or asymptomatic smokers (p>0.05). No significant correlation was found between the $T_{1/2}$ and spirometric parameters including DLco, FVC, $FEV_1,\;FEV_1/FVC$ (%) and $FEF_{25-75%}$ in all subjects, and between the $T_{1/2}$ and duration of diabetes ;in diabetic patients. Conclusion: Eventhough the influence of age can't be excluded, delayed $^{99m}Tc-DTPA$ clearance half-time ($T_{1/2}$) in diabetic patients with microangiopathy indicates decreased pulmonary capillary permeability as one of the pathophysiologic results of pulmonary microangiopaththy. Further studies are needed in larger number of age matched control and diabetic patients to evaluate the diagnostic efficacy.

• Journal of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.352-358
• /
• 1987

Rate constants for the hydrolysis of para-substituted phenyl N-(p-chlorobenzoyl)chloroformimidate (I) derivatives in 1 : 4 dioxane-water at $25^{\circ}C$ have been determined. Rate data, substituent effect $(\rho\>{\rho}^+)$, product analysis and MO calculation indicate that the uncatalyzed reaction proceeds through an $S_N1$ mechanism involving the formation of azocarbonium ion (II) below pH 3.0, and the base-catalyzed reaction proceeds through an $S_N2$ mechanism via transition state (III) above pH 4.0. The relative stability of four peri planar conformational isomers were (E-ap) > (Z-ap) > (E-sp) > (Z-ap), respectively, and the most stable stereo structures shows that the Y-substituted phenyl group $(C_6H_4-Y)$ occupy vertical $(90^{\circ})$ position on the plane of the benzimidochloroformyl group in (E-ap) conformer. The nucleophilic substitution of water molecule occurs by sigma attack to the activatived azomethine carbon atom of (I) derivatives.

• Journal of Aerospace System Engineering
• /
• v.13 no.6
• /
• pp.52-59
• /
• 2019

The rotor blade is a key component that generates the lift, thrust, and control forces required for helicopter flight by the torque transmitted through the hub and the blade pitch angle control, and should be designed to factor vibration characteristics so that there is no risk of resonance with structural safety. In this study, the structural design of the main rotor blade for MPUH(Multi-Purpose Unmanned Helicopter) was conducted and the sectional stiffness measurement of the fabricated blade was performed. The evaluation of the vibration characteristics of the main rotor system was then conducted factoring the measured stiffness distribution. The interior of the rotor blade comprised of the skin, spar, and torsion box, and carbon and glass fiber composites were applied. The Ksec2D program was applied to predict the stiffness of blade, and the results were compared to the measured data. CAMRADII, a comprehensive rotorcraft analysis program, was applied to investigate the natural frequency trends and resonance risks due to the rotor rotation.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.6
• /
• pp.290-293
• /
• 2015

Recently, a lot of interest has been shown in structural maintenance managements of civil infrastructures. Many researchers have been conducted on various maintenance techniques and repair materials. Among other fiber materials the carbon fiber materials are especially focused on maintenance management of Highway Bridges. Extensive work has been done on Carbon Fiber Sheet (CFS). Nevertheless, Carbon Fiber Strand Sheet (CFSS) is a newly developed material, on which limited work has been done until now. Therefore, in this study bonding the CFSS to RC slab specimen and fatigue resistance evaluation has been conducted. The results demonstrated an increase of 25.3 times more reinforcement of RC slab compared to non-reinforced RC slab. Moreover, compared to CFS-bonded RC slab, The CFSS-bonded RC slab showed 1.2 times greater reinforcement.

• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.211-215
• /
• 2005

Stabilization process is absolutely necessary to convert the precursor fibers into chemically, physically, thermally and structurally stable carbon fibers. Especially, it is critically important for rayon fibers experiencing severe weight loss and thermal shrinkage occurring at the stabilization stage below $400^{\circ}C$. The stabilization of rayon fibers strongly depends not only on stabilization temperature but also on heating rate, chemical pre-treatment, atmosphere, and so on. In the present study, the weight loss, fiber diameter change occurred in the furnace during the stabilization process for rayon fibers produced with various heating rates and in the absence and presence of phosphorous-based flame retardants and the thermal stability of the stabilized fibers were investigated. The result indicates that the weight, diameter and thermal stability of the rayon fibers are significantly affected by the type and amount of the flame retardant used. It is also suggested that the pre-treatment of rayon fibers with a concentration lower than $3\;vol\%$ of phosphoric acid is most desirable for further carbonization process of stabilized rayon fibers.

• Journal of Energy Engineering
• /
• v.13 no.1
• /
• pp.82-91
• /
• 2004

In order to utilize inorganic components in coal and wastewater sludge as an environmentally stable material, slag-forming is considered as one of the suitable methods better than producing as an ash. Coal slag that was produced by gasification as well as the slag made from wastewater sludge by incineration or melting process have been analyzed with the viewpoint of recyclability. Slags produced by water quenching exhibited a cracked shape that has a size of few millimeters with sharp edges. Slags contain the unburned carbon content below 0.15％ and expose mostly amorphous structural characteristics. Analysis results in the extraction of heavy metal compounds demonstrate that both slags from coal and wastewater sludge could be utilized as a safe recycle material even with a Japanese environmental regulation that is ten times more stringent than the current Korean standard. Slags from coal and wastewater sludge show significant differences in contents of each heavy metal compound. Since the future trend of environmental regulation shifts to the control of total content for each heavy metal compound, proper mixing of slags that contain different heavy metal contents might be an option for manufacturing recycle materials.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.10
• /
• pp.1049-1056
• /
• 2014

Microelectronics components contain various materials with different coefficients of thermal expansion (CTE). Although a large amount of published data on the CTE of standard materials is available, it occasionally becomes necessary to measure this property for a specific actual material over a particular temperature range. A change in the temperature of a material causes a corresponding change in the output of the strain gage installed on the specimen because of not only the mechanical load but also the temperature change. In this paper, a detailed technique for CTE measurement based on these thermal characteristics of strain gages is proposed and its reliability is evaluated. A steel specimen, aluminum specimen, and copper specimen, whose CTE values are well known, were used in this evaluation. The proposed technique was successfully applied to the measurement of the CTE of a coreless package substrate composing of electronics packages.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.3 s.46
• /
• pp.269-279
• /
• 2000

It is much expected that steel bridges, which have been damaged by increase of vehicle load and corrosion, need repair or strengthening. In this paper, the stress generated by repair welding under loading are analyzed by three dimensional elasto-plastic analyses. The longer and deeper repair weld line bocemes, the larger the magnitude of transient stress becomes. The magnitude of transient stress generated by repair welding under loading $({\sigma}_y/3,\;{\sigma}_a)$ is similar to summation of stresses generated by repair welding and loading. The longer repair weld line ratio(1/b) becomes, the larger the magnitude of transient stress generated by repair welding under loading bocomes. And, the longer repair weld line ratio(1/b) becomes, the larger the magnitude of in-plane displacement generated by repair welding under loading$({\sigma}_y/3,\;{\sigma}_a)$.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.195-195
• /
• 2011

본 연구는 방염성능시험에 의한 필름 및 도료처리 시료를 대상으로 화재 시 발생하는 연소가스 중의 독성에 대하여 NES 713 방법에 의해 분석하고, 독성지수를 확인함으로써 연소 시 인체에 미치는 영향을 간접적으로 확인해 보고자 하였다. 기존 방염제품 중 필름과 도료처리 그리고 도료처리 후 기간이 경과한 시료의 3가지로 실험군을 구분하였으며, NES 713 방법으로 연소가스를 분석하고 독성지수를 평가하였으며, 추가로 기존의 국내 노출기준과의 비교를 수행하였으며, 국내 NES 713 방법을 활용한 선행연구들을 참조하였다. 발암가능 추정물질인 아크릴로니트릴은 총 18개의 시료에서 검출되었으며, 포름알데히드는 9개의 시료에서 검출되었다. 염화수소와 브롬화수소는 각각 5개의 시료들에서 검출된 반면에 도료처리된 시료에서는 각각 1개만이 검출되었다. 그 외 일산화탄소와 이산화탄소 그리고 질소산화물은 모든 시료에서 공통적으로 검출되었다. 독성지수는 최소 3.5에서 최고 9.4의 값을 갖는 것으로 나타났다. 본 연구에서 수행한 NES 713 분석결과와 독성지수 산출 및 기존 국내 노출기준과의 비교를 수행해 본 결과는 다음과 같았다. 첫째, 현행 국내 기준 상 방염제품의 독성시험 등에 관한 기준이 없고, 둘째, 방염제품에 대한 연소가스 독성 등을 평가한 선행연구가 제한적이라는 점에서 의미가 있을 것으로 사료된다. 하지만 독성지수의 적용이 국내에서 이루어지고 있지 않은 현실에서 산출도나 독성지수의 위해정도를 평가하기 어렵고, 시료의 수량이 총 18개로서 많지 않았다는 점에서 전체 방염제품의 연소가스 독성의 잠재적인 위험성을 추정할 수는 있지만 대표성을 갖기에는 문제점이 있다는 한계성을 벗어날 수 없었다. 따라서 향후 후속 연구에서는 보다 많은 방염제품들을 대상으로 무작위 선정을 통한 연구 설계 및 실험 연구가 수행된다면 보다 객관적이고 대표성을 지닌 연구결과를 도출할 수 있을 것으로 기대한다.

• Microbiology and Biotechnology Letters
• /
• v.30 no.4
• /
• pp.325-331
• /
• 2002

investigated to maximize the production of fibrinolytic enzyme from Fomitella fraxinea mycelia. Among the tested media, Coriolus versicolor medium (CVM) showed the highest production for the enzyme. 2% galactose, 0.6% yeast extract and 0.1% $NaNO_3$, 0.1% $K_2HPO_4$, and 0.05% $MgSO_4$.$7H_2O$ as carbon, nitrogen, phosphorus, and inorganic salt sources resulted in the maximum level of the enzyme activity, respectively. The enzyme production from F. fraxinea was reached to highest level after the cultivation for 10 days at $25^{\circ}C$ and pH 9. The enzyme activity of culture supernatant was most active at $40^{\circ}C$ and pH 10. The activity of the enzyme was inhibited by phenylmethylsulfonylfluoride and aprotinin, suggesting that it is a serine protease.