• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.14 no.2
• /
• pp.39-44
• /
• 2006

The unsteady vortex lattice method is used to model lead-lag in flapping motions of a rectangular flat plate wing. The results for plunging and pitching motions were compared with the limited experimental results available and other numerical methods. They show that the method is capable of simulating many of the features of complex flapping flight. The lift, thrust and propulsive efficiency of a rectangular flat plate wing have been calculated for various lead-lag motion and reduced frequency with an amplitude of flapping angle(20o). To describe a motion profile of wing tip such as elliptic, line and circle, the phase difference of flapping and lead-lag motion was changed. And the effects of the motion profile on the aerodynamic characteristics of the flapping wing are discussed by examination of their trends.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.9
• /
• pp.1486-1491
• /
• 2003

A modeling method for the modal analysis of a composite trapezoidal plate undergoing in-plane translational acceleration is presented in this paper. The equations of motion for the plate are derived and transformed into a dimensionless form. The effects of the inclination angles, fiber orientation angle and the acceleration on the modal characteristics of the plate are investigated.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.6
• /
• pp.134-139
• /
• 2011

This study was conducted on the characteristics of fluid flow and heat transfer in the ribbed tube used for a steam power plant. It was assumed that the air is incompressible and therefore, its density is not variable according to temperature. In addition, the gravity was ignored. A commercial code of computational fluid dynamics was used and standard k-$\epsilon$ model was used together with the energy equation included to calculate heat transfer. As Reynolds No. was low at the velocity distribution in the axial direction, the air reached hydro-dynamically fully developed region shortly but high Reynolds No. yielded late full hydro-dynamic development. The velocity distribution and non-dimensional temperature distribution were all physically reasonable and thus had a good agreement with the experimental result.

• Journal of the Korean Society of Combustion
• /
• v.1 no.2
• /
• pp.41-49
• /
• 1996

A numerical study is conducted to investigate the periodically unstable shock induced combustion around blunt bodies in stoichiometric hydrogen-air mixtures. Euler equations are spatially discretized by upwind-biased third order scheme and temporally integrated by Runge-Kutta method. Chemistry model used in this study involves 8 elementary kinetics steps and 7 species. At a constant Mach number, the effects of projectile size, inflow pressure and inflow temperature are examined with Lehr#s experimental condition as a reference. In addition to oscillation frequency, characteristic distances and time averaged values are found from the result to find an relation with dimensionless parameters. As a result, it is found that the effects of inflow pressure and body size are very similar and $Damk{\ddot{o}}hler$ number plays an important role in determining the instability characteristics.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.8
• /
• pp.2516-2523
• /
• 1996

The equations of motion for rotating contilever beams with a concentrated mass loated in an arbitrary position are derived. For the modeling of the concentrated mass the Dirac delta function is used for the mass density function. Parametric studies are performed with five dimensionless variables ; natural frequencies, angular velocity, hub radius, concentrated mass, and the mass location. The concentrated mass, whereverit may locate, lowers the natural frequencies of a stationaly beam. However, when the beam rotates, the natural frequencies(if they increase or decrease) are dictated by the location of the concentrated mass.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.11
• /
• pp.1003-1011
• /
• 2013

A new formulation of the MNDIF method is introduced to extract highly accurate eigenvalues of concave acoustic cavities. Since the MNDIF method, which was introduced by the author, can be applicable for only convex acoustic cavities, a new approach of dividing a concave cavity into two convex domains and formulating an algebraic eigenvalue problem is proposed in the paper. A system matrix equation, which gives eigenvalues, is obtained from boundary conditions for each domain and the condition of continuity in the interface between the two domains. The validity and accuracy of the proposed method are shown through example studies.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.920-923
• /
• 2004

천공 요소는 자동차나 공조기 등의 유체기계의 흡/배기계에 널리 사용된다. 천공요소는 일반적으로 유동과 소음원이 동시에 존재하는 환경에서 사용되며, 유동 및 음압 레벨의 변화에 의해서 큰 영향을 받게 된다. 천공요소의 임피던스의 변화는 소음기의 음향학적 특성에 영향을 미치게 되므로, 유동이나 음압 조건이 임피던스에 미치는 영향에 대한 연구가 중요하다. 본 연구에서는 통과하는 유동이 존재하는 천공요소의 임피던스를 실험을 통하여 측정하고 경계요소법을 사용하여 예측하였다. 측정 및 예측된 임피던스를 무차원화 해석을 수행하여 영향을 미치는 인자들을 분석하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.10
• /
• pp.653-659
• /
• 2015

A new formulation of the non-dimensional dynamic influence function method, which is a type of the meshless method, is introduced to extract highly accurate eigenvalues of clamped plates with arbitrary shape. Originally, the final system matrix equation of the method, which was introduced by the author in 1999, does not have a form of algebraic eigenvalue problem unlike FEM. As the result, the non-dimensional dynamic influence function method requires an inefficient process to extract eigenvalues. To overcome this weak point, a new approach for clamped plates is proposed in the paper and the validity and accuracy is shown in verification examples.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.464-464
• /
• 2016

기존의 고정보 설치에 따른 문제점으로 보 상류의 유속감소로 인한 유사나 오니의 퇴적으로 저류량의 감소, 홍수위 상승, 수질악화, 보 상 하류간 연속성의 단절 등의 개선을 위한 연직가동보에서의 수리특성을 분석하였다. 그에 따라 본 연구에서는 gate의 개도 높이를 조절함으로써 하상 퇴적물을 배출하고 수위와 유량을 조절할 수 있는 하단배출형 가동보를 길이 10 m, 폭 0.4 m, 높이 0.4 m의 가변경사식 수로에 다단식으로 배치하여 유량과 가동보 개도 높이에 따른 수리 특성을 분석하였다. 연직가동보의 개도에 따른 방류량의 수리특성으로 유량계수를 분석하고 그에 따른 보 상류에서 저류특성을 분석하였다. 유량과 연직가동보의 개도에 따른 수리특성으로 도수현상에 따른 수축계수, 도수길이, 도수높이를 분석하고 그에 따른 관계식을 제시하였다. 연직가동보 주변의 수리특성의 분석을 위한 차원해석을 실시하고 지배적인 무차원 변수를 도출하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.417-417
• /
• 2022

현재 수공 구조물 설계 시 설계강우량으로써 빈도해석과정을 통해 산정된 확률강우량을 적용하고 있다. 하지만 확률강우량의 경우 시계열 강우분포형태를 알 수 없는 문제가 존재한다. 강우의 시간분포 형태는 비점오염, 강우에 의한 수식 등 도달시간과 첨두 홍수량에 지대한 영향을 미치는 요소이다. 현재 국내에서는 Huff 4분위법이 널리 사용되고 있지만 Huff 4분위법은 기존의 강우패턴을 평균하였기 때문에 자연현상인 강우의 다양하고 복잡한 분포형태를 반영하기 어렵다는 문제를 가지고 있으며, Huff 4분위법이 갖는 한계로 정의할 수 있다. 따라서 본 연구에서는 Huff 4분위법이 갖는 한계를 보완하기 위해 설계홍수량산정지침에서 제시하고 있는 초과확률 50%의 시간분포 값을 산정하는 것에서 벗어나 한반도의 강우형태와 최근 20년간의 강우 패턴 변화를 고려한 최적 초과 확률값을 선정하였다.