• Title/Summary/Keyword: 무차원 유량산정공식

Search Result 3, Processing Time 0.016 seconds

Dimensionless Discharge Formula of Parshall Flumes with Arbitrary Shape (임의형상 파샬플륨에 대한 무차원 유량공식 산정)

  • Kim, Sooyoung;Lee, Seung Oh
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.33 no.5
    • /
    • pp.1777-1783
    • /
    • 2013
  • Parshall flume is more practical one of hydraulic structures for measuring flowrate in open channels and also has more advantages when the magnitude of flow velocity is relatively lower or much more sediments are brought from upstream. International Organization for Standardization (ISO) has suggested the empirical formulas standardized by the sizes and dimensions of Parshall flume. However, the related studies using the numerical simulations and experiments are relatively rare. Therefore, in this study, it was examined whether the numerical simulation was adequacy for reproducing the hydraulic characteristics of Parshall flume as much as laboratory experiments by comparing the results from numerical simulations and empirical equation. And for arbitrary Parshall flume, that is unlisted in the ISO standards due to environmental conditions, constructional difficulties etc, thus, the hydraulic experiments should be conducted to obtain the empirical formulas for it, the results from numerical simulations were compared with those of laboratory experiments. Consequently, it was convinced that the numerical simulation about Parshall flume was simulated appropriately instead of experimental approach. And the dimensionless discharge equation of arbitrary ones was suggested using the results of numerical simulations, and the equation was validated by comparing with laboratory experimental results showing the maximum relative error of 2.3%. If the actual topography, the shape of inlet and submerged flow, which is excluded in this study, were carefully considered, it would be possible to supply a simple empirical discharge equation based on numerical results. Also, it can replete hard works for hydraulic experiment being error-prone with complex procedures to a minimum of economic effort.

Estimation of Muskingum-Cunge Parameters for Natural Streams (자연하천에 대한 Muskingum-Cunge 모형의 매개변수 산정)

  • Kim, Jin-Soo;Jun, Kyung-Soo
    • Journal of Korea Water Resources Association
    • /
    • v.43 no.2
    • /
    • pp.233-243
    • /
    • 2010
  • A method is proposed of estimating Muskingum-Cunge parameters for natural streams using cross-sectional and longitudinal channel geometry and roughness coefficient data. Firstly, for various water-surface levels at a cross section cross-sectional areas and hydraulic radii are calculated. Corresponding discharges are then calculated using Manning's equation. This procedure is repeated for all cross-sections in the reach. Finally, routing parameters are estimated from the calculated cross-sectional area and discharge value pairs by regression analysis. The procedures for estimating Muskingum-Cunge parameters are applied to the South Han River. Flows calculated by Muskingum-Cunge model with estimated parameters showed much better agreement with those by dynamic wave model in peak discharge, time to peak discharge, and normalized RMS errors than those calculated by the HEC-1 Muskingum-Cunge model.

A study on the Derivation of GIUH-Clark Model (GIUH-Clark 모형의 유도에 관한 연구)

  • Lee, Byung Woon;Jang, Dae Won;Kim, Hung Soo;Seoh, Byung Ha
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2004.05b
    • /
    • pp.731-736
    • /
    • 2004
  • 강우-유출과정의 수문학적 현상을 보다 정확히 분석하고 예측하는 기법으로 강우에 의한 유출의 반응을 나타내는 지체시간, 도달시간 등 수문학적 반응시간을 유역의 지형형태학적 인자들과 연계하는 방법이 많이 이용되고 있다. 이에 본 연구에서는 Clark방법과 지형형태학적 순간단위도(GIUH)를 이용하여 계측유역의 강우-유출반응을 모의하였고, 이를 관측된 값과 비교하여 미계측유역의 적용성 여부를 검토해보았다. 대상 유역의 하상지형인자 및 지형형태학적 특성은 Arc-View를 이용하여 구하였으며, 이를 기존의 문헌자료와 비교해보았다. Clark방법의 매개변수의 결정에 있어서 시간-면적곡선은 HEC-1의 무차원 식을 이용하였고, 도달시간은 Kirpich 공식을 이용하여 구하였으며, 저류상수는 Clark방법에 의해 추정된 순간단위도의 첨두유량이 Horton의 차수비의 함수로 구한 철두유량과 같아지는 값으로 결정하였다. 본 연구는 전적비교를 출구점으로하는 유역면적 $8.5km^2$인 설마천을 대상유역으로 하였으며, 모의된 강우-유출반응과 비교하기 위해 사용된 강우사상은 2002년의 8월 4일과 2002년 10월 6일의 10분 단위 우량이다. Clark방법과 GIUH를 이용하여 모의한 유출곡선과 관측된 유출곡선을 비교해본 결과 첨두유량은 8월의 강우사상 때는 $21\%$크게, 10월의 강우사상 때는 $35\%$작게 나타났다. 첨두시간은 모의된 경우가 각각 10분, 20분 빨리 도달하였다. 또한 이러한 결과는 유역의 도달시긴에 가장 민감하게 반응함을 알 수 있었다. 따라서, 유역의 도달시간 산정에 주의를 요한다면 프랙탈 차원이 유사한 미계측유역의 수문곡선 산정에 있어서 Clark방법과 GIUH를 이용하는 방법도 유용하다고 사료된다. 주는 각 수문인자 중 강우시간분포와 유효우량 산정방법 그리고 유출모형에 대해 자자 검토하였으며, 최종적으로 면적에 따른 임계지속기간과 유출량의 변화를 검토해 보았다.이를 각각의 경우의 해석해 결과와 비교${\cdot}$분석하였다. 후방추적 퍼프모형은 전방추적 퍼프모형에 비하여 사용된 퍼프수와 관계없이 작은 오차를 발생하였으며, 전체적으로 퍼프 모형이 입자모형보다는 훨씬 적은 수의 계산을 통해서도 작은 오차를 나타낼 수 있다는 것을 알 수 있었다. 그러나 Gaussian 분포를 갖는 퍼프모형은 전단흐름에서의 긴 유선형 농도분포를 모의할 수 없었고, 이에 관한 오차는 전단계수가 증가함에 따라 비선형적으로 증가하였다. 향후, 보다 다양한 흐름영역에서 장${\cdot}$단점 분석 및 오차해석을 수행한 후에 각각의 Lagrangian 모형의 장점만을 갖는 모형결합 방법을 제시할 수 있을 것으로 판단된다.mm/$m^{2}$로 감소한 소견을 보였다. 승모판 성형술은 전 승모판엽 탈출증이 있는 두 환아에서 동시에 시행하였다. 수술 후 1년 내 시행한 심초음파에서 모든 환아에서 단지 경등도 이하의 승모판 폐쇄 부전 소견을 보였다. 수술 후 조기 사망은 없었으며, 합병증으로는 유미흉이 한 명에서 있었다. 술 후 10개월째 허혈성 확장성 심근증이 호전되지 않아 Dor 술식을 시행한 후 사망한 예를 제외한 나머지 6명은 특이 증상 없이 정상 생활 중이다 결론: 좌관상동맥 페동맥이상 기시증은 드물기는 하나, 영유아기에 심근경색 및 허혈성 심근증 또는 선천성 승모판 폐쇄 부전등을 초래하는 심각한 선천성 심질환이다. 그러나 진단 즉시 직접 좌관상동맥-대동맥 이식술로 수술적 교정을 해줌으로써 좋은 성적을 기대할 수 있음을 보여주었다.특히 교사들이 중요하

  • PDF