• Title/Summary/Keyword: 무차원수 $Y_b$

Search Result 4, Processing Time 0.02 seconds

Friction Factor of Smooth Turbulent Open Channel Flow (완난류 개수로 흐름의 마찰계수)

  • Yoo, Dong-Hoon;Lee, Tae-Hee
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2007.05a
    • /
    • pp.438-443
    • /
    • 2007
  • 개수로 흐름에 대한 연구는 1700년대 중엽 Chezy에 의해 이론적인 기초를 다졌으며, 광범위하고 조직적인 관측연구는 Darcy(1803-1858)에 의해 약 150년 전에 폭 2m, 길이 600m에 이르는 수로에서 실험관측을 수행하고자 시도하였다. Darcy의 동료이자 후계자인 Bazin은 제한된 조건의 현장관측뿐 아니라 다양한 조건의 수로를 제작하여 실험관측을 수행하였으며 그의 실험자료는 Bazin 자신 뿐만 아니라 Manning이나 Ganguillet와 Kutter 등 여러 연구자들의 경험식 개발에도 이용되었다. Nikuradse(1933)의 균일조도 원형관수로 실험결과로부터 관로 흐름은 층류, 천이층류, 완난류, 천이난류, 전난류 등 다섯 종류의 흐름특성을 가지고 있음을 확인하였고 Bazin(1829-1917)과 varwick(1945)의 실험결과로부터 개수로 흐름에서도 관로 흐름과 마찬가지로 층류, 천이층류, 완난류, 천이난류, 전난류 등 다섯가지의 흐름특성이 존재함을 알 수 있다. 본 연구에서는 기존의 지수형 마찰계수 산정식에서 단순히 조고만의 함수였던 ${\alpha}$에 물의 기본적인 성질인 표면장력, 점성력, 밀도와 자연 하천의 경사, 수심, 수면, 폭, 조고의 영향을 고려한 수심에 관한 무차원수 $Y_h$, 수면 폭에 관한 무차원수 $Y_b$, 조고에 관한 무차원수 $Y_k$를 도입하였다. 따라서 개수로 흐름 해석에 있어서 기존의 마찰계수 산정치보다 여러 영향을 반영하여 정확한 값을 산정할 수 있을 것으로 판단된다.

  • PDF

SIMILARITY ANALYSIS OF HEART ARRHYTHMIA WITH FLUID VORTEX-NUMERICAL APPROACH (유체와류현상과 심장부정맥의 상관성 연구-수치적 접근)

  • Shim, E.B.
    • 한국전산유체공학회:학술대회논문집
    • /
    • 2010.05a
    • /
    • pp.221-223
    • /
    • 2010
  • Considering the similarity between fluid vortex and arrhythmogenic reentrant waves in heart, we applied the non-dimensionalization method in fluid dynamics to arrhythmia analysis and discovered a new non-dimensional simulation results, there was a threshold value of the number that resulted in the induction of a reentrant wave.

  • PDF

Effect of Geometric and Dynamic Parameters on Mixing Characteristic in an Internal-Loop Apparatus (내부 순환 장치의 크기 및 유속 변화에 따른 혼합특성)

  • 최윤찬;김동석
    • KSBB Journal
    • /
    • v.11 no.4
    • /
    • pp.405-410
    • /
    • 1996
  • This paper discussed the dispersion effect according to the geometrical variation of an internal-loop spparatus by the method of pulse injection of a tracer. The Bodenstein number, which is the dimensionless group characterizing the effect of dispersion, was decreased with increasing the superficial gas velocity in the 50L and the 500L apparatus. But, in the 5L apparatus, the Bodenstein number was increased with increasing the superficial gas velocity in the range of 0 to 2cm/sec but above that range the rate of increase was dropped down to give a constant value because of the phenomenon of gas disengagement. The principle of similarity based on dimensional analysis was applied to design a pilot scale internal-loop apparatus. The effect of dispersion was examined in three different internal-loop apparatus to give the following correlation with major geometric and fluid dynamic properties as variables. B0=4.4014ReG0.117 ReL-0.0065(Hr/Dr)0.76(Dd/Dr)-0.76

  • PDF

Numerical Technique to Analyze the Flow Characteristics of a Propeller Using Immersed Boundary Lattice Boltzmann Method (가상경계 격자볼쯔만법을 이용한 프로펠러의 유동특성해석 방법에 관한 연구)

  • Kim, Hyung Min
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.40 no.7
    • /
    • pp.441-448
    • /
    • 2016
  • The thrust force created by a propeller depends on the incoming flow velocity and the rotational velocity of the propeller. The performance of the propeller can be described by dimensionless variables, advanced ratio, thrust coefficient, and power coefficient. This study included the application of the immersed boundary lattice Boltzmann method (IBLBM) with the stereo lithography (STL) file of the rotating object for performance analysis. The immersed boundary method included the addition of the external force term to the LB equation defined by the velocity difference between the lattice points of the propeller and the grid points in the domain. The flow by rotating a 4-blade propeller was simulated with various Reynolds numbers (Re) (including 100, 500 and 1000), with advanced ratios in the range of 0.2~1.4 to verify the suggested method. The typical tendency of the thrust efficiency of the propeller was obtained from the simulation results of different advanced ratios. It was also necessary to keep the maximum mesh size ratio of the propeller surface to a grid size below 3. Additionally, a sufficient length of the downstream region in the domain was maintained to ensure the numerical stability of the higher Re and advanced ratio flow.